Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Brisbane
AC installation in Brisbane, CA typically runs between $3,500 and $7,500, and the right system for your hillside home depends heavily on how much wind and salt air your side of the slope actually gets. Homes above Visitacion Avenue face a different set of demands than those tucked lower near the valley, and a condenser that works great in Millbrae can struggle on the exposed eastern face of San Bruno Mountain. Our crews know those differences because we work them every week. Call (747) 966-3037 to talk through what your house actually needs.
We serve the whole Brisbane residential core, from the terraced streets around Kings Road up to the ridge, with the same written price before any work starts and the same 365-Day Done Right Promise on every job.
Why Meadowsweet Heating & Air Is Brisbane’s Preferred AC Installation Company
Luis Serrano leads our Brisbane install work, and he’s particular about two things: how the equipment holds up against the San Bruno Gap wind, and how the house looks when the crew leaves. The Cedarwell Care Promise is the reason both stay consistent. Shoe covers and drop cloths go down before tools come in, the written price lands in your hand before any work begins, and a photo of the clean-up gets sent before we pull out of the driveway. That’s standard on every visit, not an upsell.
We also answer the phone with a live person, 24 hours a day, including weekends and holidays. No voicemail queue. When a Brisbane homeowner calls about a failed condenser on a hot afternoon, they talk to someone who can actually schedule the visit. Our technicians are background-checked and uniformed, and they follow the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work.
Part of the Cedarwell family of HVAC companies, established in 2004, Meadowsweet Heating & Air services nine equipment brands, so we’re not locked into recommending one manufacturer over another. That matters on a hillside where the wrong condenser placement can cost you real money in efficiency every single year.
Furnace Installation in Brisbane
Furnace Installation in Brisbane usually means replacing a wall heater or gravity floor furnace that has been in the wall or floor since the house was built in the 1940s or 1960s. Many of the postwar homes terraced into the hillside never had central ducting to begin with, so installing a proper furnace here isn’t a simple swap. It’s a routing job. Attics are often too shallow for standard duct runs, and crawl spaces under these raised foundations run tight and uneven. We plan the route before we quote the price, so you know exactly what the work involves and what it costs. A furnace replacement in Brisbane typically falls inside the same $3,500 to $7,500 investment range as AC installation, and the more complex the duct routing, the closer to the upper end of that range you’ll land.
Wall Furnace and Floor Furnace Replacement
The original gravity floor heaters and wall furnaces in Brisbane’s postwar housing stock are decades past their service life. When one of those finally gives out, the best fix is usually a high-efficiency central furnace with new, properly sealed ductwork. We handle the full removal, the new gas or electric unit, and the permitting paperwork.
Ducted vs. Ductless in Tight Hillside Homes
On the steepest lots, standard duct runs physically cannot fit. We’ll tell you if that’s your house before we quote anything. In those cases, a ductless heat pump or mini split system often delivers better comfort than forcing ductwork through spaces never designed for it.
HVAC Installation in Brisbane
HVAC Installation in Brisbane covers both heating and cooling, and for most of the homes we see here, the best value is a single heat pump system that handles both jobs. The San Bruno Gap means Brisbane runs colder and windier than South San Francisco or Daly City, even on days that look mild from the freeway. A heat pump sized and placed correctly will keep the house warm through those wind-driven winter afternoons and cool during the rare still, hot stretches in late summer. A full HVAC install in this city runs from $3,500 to $7,500 depending on system size, efficiency tier, and whether ductwork already exists or needs to be added.
Heat Pump Placement for Wind Exposure
Where a heat pump sits on your lot matters more in Brisbane than almost anywhere else on the Peninsula. We position outdoor units so the prevailing afternoon wind doesn’t hammer the exhaust side or force cold air back into the condenser. On exposed hillside addresses, we also brace the pad against gust loading.
Coordinated Furnace and AC Replacement
When a house has a furnace and an AC that both date back decades, replacing them together as one matched system almost always costs less than doing them separately three years apart. The refrigerant lines, the thermostat, the duct connections, the electrical run: all of it gets done once, cleanly.
Trusted Brands We Service in Brisbane
We install and service equipment from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Brisbane’s wind and salt exposure, we often recommend Goodman or Rheem units with factory-coated condenser coils and corrosion-resistant cabinets, along with Daikin ductless systems for hillside homes where ductwork isn’t practical. Because we stock parts locally and run our own install crews, we don’t hand your job to a subcontractor and we don’t wait on a distributor across the Bay. That keeps turnaround tight, even during the first hot week of the year.
Common AC Installation Problems We See in Brisbane Homes
- Wind-battered condenser fins. On the exposed eastern slope, salt-laden Pacific air pushed through the San Bruno Gap pits aluminum fins years ahead of schedule. A standard condenser that might last 15 years in Daly City can look rough in 8 here. Coated coils are the fix, not an upsell.
- Shallow attics and crawl spaces. The 1940s and 1960s homes terraced into the hillside were not built with central air in mind. We routinely route linesets along exterior walls or under elevated decks because the attic physically cannot hold a duct run. That’s normal work here.
- Misplaced heat pumps losing efficiency to the wind. If an outdoor unit sits where the afternoon gusts hit it head-on, the system burns more power than it should trying to move heat. We shield and position units so the wind works around them, not against them.
- Oversized equipment from lazy sizing. Some installers size a system by square footage alone and skip the load calculation. On a Brisbane hillside, that means a system that short-cycles, runs humid, and never really conditions the rooms at the back of the house. We run room-by-room load calculations on every install.
Pricing for AC Installation in Brisbane, CA
AC installation in Brisbane runs $3,500 to $7,500 for the full job, including equipment, labor, refrigerant, electrical work, and the pad. A tune-up costs $80 to $200, AC repair lands between $150 and $650, and furnace repair runs $150 to $700. What pushes a Brisbane install toward the upper end: coated condenser coils and corrosion-resistant cabinets for salt-wind exposure, exterior lineset routing on steep lots where attic space doesn’t exist, and any new ductwork. We give you a written price before any work starts, so you know the full number before you commit to anything. Call (747) 966-3037 for a free estimate.
| Service | Brisbane Price Range |
|---|---|
| AC Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
| AC Repair | $150-$650 |
| Furnace Repair | $150-$700 |
For exact numbers on your specific house, call us. The estimate is free and the price we give you is the price you pay.
We Also Serve Cities Near Brisbane
While this page focuses on AC Installation in Brisbane, our crews also handle installs in South San Francisco, Daly City, San Bruno, and Millbrae. If you’re on the edge of the Brisbane hillside or in a neighboring city, the same AC Installation team covers your address. Same written pricing, same 365-Day Done Right Promise.
Serving Brisbane, CA - Our Local Coverage Area
We’re based in the Brisbane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Brisbane
Brisbane installs cost more because the hillside terrain and wind exposure demand extra engineering. Steep lots need exterior lineset routing or custom ductwork solutions that flatland homes in South San Francisco never require. Salt-wind exposure from the San Bruno Gap means we spec coated condenser coils and corrosion-resistant cabinets, which add real material cost but pay for themselves in equipment life. A Brisbane job often runs at the upper end of the $3,500 to $7,500 range, while a comparable South San Francisco install might sit in the middle. Call (747) 966-3037 and we’ll give you an exact written price for your address.
Yes, noticeably. The wind coming through the San Bruno Gap carries salt air that settles on condenser fins and corrodes them years ahead of the inland schedule. We’ve seen condensers off Kings Road with fins pitted into lace after eight years of exposure. The countermeasure is a coated coil and a corrosion-resistant cabinet, which we recommend on almost every install above Visitacion Avenue.
Yes, and on many steep lots it’s the better choice. Where attics are too shallow for duct runs, a ductless mini split or multi-zone heat pump avoids the whole problem. Linesets route along exterior walls or under decks, which is standard practice on the upper hillside streets. Costs land inside the same $3,500 to $7,500 range depending on the number of indoor heads.
We position the outdoor unit so the prevailing afternoon wind doesn’t blow directly into the exhaust side or push cold air back across the coil. On exposed lots, that often means placing the unit on the lee side of the house or behind a windbreak, and bracing the pad against gust loading. The placement decision happens after we walk the lot and watch where the wind actually comes from, not from a generic template.
Given the salt air, we recommend two tune-ups a year rather than one, spaced about six months apart. Each visit includes coil cleaning and a fastener inspection, since the wind corrosion starts at screws and brackets first. A tune-up costs $80 to $200, and catching corrosion early is much cheaper than replacing a condenser. Call (747) 966-3037 to schedule.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air.