Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Cleburne
AC installation in Cleburne typically runs $3,500 to $7,500, and in this town the right install is rarely a simple equipment swap. Most homes here were built before central air existed, which means the ductwork underneath them was retrofitted, often undersized, and usually fighting the house. That’s the kind of thing our crews look for before any new condenser ever gets ordered. If you’re ready to talk through what your home actually needs, call (747) 966-3037 and you’ll get a live person, not a voicemail queue.
Why Meadowsweet Heating & Air Is Cleburne’s Preferred AC Installation Company
We spend a lot of time in Cleburne’s older neighborhoods. The Victorian and Craftsman blocks near the historic downtown district, the mid-century ranch houses off Nolan River Road, the pier-and-beam homes along Henderson Street. These houses tell us things. A single return grille in a hallway that’s supposed to serve a 1,800 square foot house. Duct runs through uninsulated attic space that hit 140°F in August. Panels that were last updated when the home had a window unit and a few wall outlets. None of that surprises us anymore.
Our AC Installation team is part of the Cedarwell family of HVAC companies, built around the Cedarwell Care Promise. Every job includes a written price before any work starts, shoe covers and drop cloths inside the home, and a photo of the clean-up before the crew leaves. Luis Serrano leads our crews, and every technician is background-checked and uniformed. The 365-Day Done Right Promise stands behind every job: if it’s not done right, we make it right. No runarounds, no fine print.
Furnace Installation in Cleburne
Furnace installation in Cleburne runs $3,500 to $7,500, and it’s a job we handle as carefully as cooling work because this part of Texas demands both. A furnace paired with a new AC system needs to be sized for the house as a whole, not picked off a chart that ignores the ductwork already in place. In Cleburne’s older homes, that means checking the return air path before the new furnace goes in, because a furnace starved for return air will cycle on limit and fail early.
What a Cleburne Furnace Install Actually Involves
We pull the old unit, inspect the heat exchanger and flue path, verify gas pressure at the manifold, and check the supply plenum for leaks. Then we set the new furnace, level it, seal the connections with mastic, and confirm temperature rise across the heat exchanger matches the manufacturer’s spec. In pier-and-beam homes, we also check the flex duct connections underneath the floor, because when the Blackland Prairie clay shifts, those joints separate and the system starts pulling outside air.
When a Furnace Replacement Makes Sense
If your furnace is older than 15 years, has a cracked heat exchanger, or simply can’t keep the house comfortable when a February cold snap hits, replacing it is the right call. Cleburne got hammered by Winter Storm Uri in 2021, and plenty of furnaces that limped along through mild winters didn’t survive it. A new furnace installed with your AC system means one matched set, one warranty, and one crew accountable for both.
HVAC Installation in Cleburne
HVAC installation in Cleburne is a different animal than new construction work in the subdivisions north of Burleson. You’re not starting with a clean mechanical room and properly sized ducts. You’re typically working around existing infrastructure that was added decades after the house was built. That means the right installation starts with a load calculation and an honest look at the duct system, not a faster same-tomorrow swap of whatever tonnage is already sitting in the closet.
How We Approach Whole-System Installs in Older Homes
We measure the house: window orientation, insulation depth, ceiling height, and the actual duct sizes and return air capacity already in place. Static pressure testing tells us whether the existing ductwork can move the air a new system needs. If it can’t, we address that first, because a new condenser on choked ducts will short-cycle and fail early. In Cleburne, that’s the single most common reason a new AC doesn’t cool the way it should.
Coordinating the Work So Your Home Stays Livable
We schedule your install for a day that works for your family, and our crews keep the work area clean throughout. Drop cloths go down before anything gets pulled off the truck. Shoe covers stay on inside the house. If you have kids home from school or pets that get nervous around strangers, tell us ahead of time and we’ll work around their routines. When the job is done, you get a photo of the clean-up before the crew leaves. That’s standard, not an upgrade.
Trusted Brands We Service in Cleburne
Our technicians are qualified to install and service equipment from nine leading brands, including Rheem, York, Daikin, and Bryant. We don’t push one brand over another. What matters is whether the system is matched to your house’s load and your ductwork’s capacity. For Cleburne homeowners, that often means choosing a unit with a broader airflow range so it can work within the constraints of retrofitted ducts. We stock common parts for these brands locally, which means less waiting when something needs attention after the install.
Common AC Installation Problems We See in Cleburne Homes
- The single-return problem. Many pre-1970 Cleburne homes have one undersized return air grille serving the whole house. It starves the system for airflow, freezes the evaporator coil in summer, and quietly kills compressors years before their time. If we don’t fix this before installing new equipment, the new system inherits the same failure.
- Shifting slab foundations and separated ducts. The Blackland Prairie clay under Johnson County expands when wet and shrinks when dry. That seasonal movement cracks supply and return ducts and shifts air handler platforms. In pier-and-beam homes, we find separated flex duct joints pulling 120°F attic air into the return side. This is far less common in newer construction to the north, and it’s a failure pattern we specifically look for in Cleburne.
- Like-for-like swaps that shouldn’t happen. A homeowner replaces a 3-ton unit with another 3-ton unit and the house still doesn’t cool. Usually the real problem was never the tonnage. It was ductwork that couldn’t move 1,200 CFM, a return that was half the size it needed to be, or an unbalanced floor plan the original system was never designed to serve. Swapping equipment without a load calculation locks in the old problem.
- Undersized electrical panels. Older Cleburne homes often have panels that were fine for a window unit and a few circuits but can’t support a modern heat pump or high-efficiency AC. We check panel capacity and breaker sizing before quoting an install, because discovering this mid-job means delays and change orders nobody wants.
Pricing for AC Installation in Cleburne, TX
In Cleburne’s market, a complete AC installation typically runs $3,500 to $7,500. Where your job lands depends on system size, efficiency rating, the condition of your existing ductwork, and whether return air or electrical work is needed before the equipment goes in. A replacement furnace runs the same $3,500 to $7,500 range. A tune-up runs $80 to $200. Here’s the breakdown:
| Service | Cleburne Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| Furnace Installation | $3,500 - $7,500 |
| Tune-Up | $80 - $200 |
Every quote includes a written price before any work starts. No surprises, no pressure. Call (747) 966-3037 for a free estimate and we’ll walk you through exactly what your home needs and what it costs.
We Also Serve Cities Near Cleburne
In addition to our work throughout Cleburne, our crews regularly handle AC installation and replacement in Keene, Joshua, Alvarado, and Grandview. Same written-price standard, same 365-Day Done Right Promise, same live person on the phone at 2 a.m. When your system needs attention, we’re already close by.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Cleburne
Because your home was almost certainly built before central air existed, and when HVAC was retrofitted in, running a single return was the cheapest path. That undersized return starves the system for airflow. Your new AC will freeze its evaporator coil in summer, short-cycle, and burn through compressors early unless the return air path is corrected before or during installation. In the Victorian and Craftsman blocks near the historic downtown district, we regularly see this exact setup. Call (747) 966-3037 and we’ll check yours.
Usually not. If your existing system never cooled the back bedrooms or the upstairs, the problem is probably duct sizing and return air, not the age of the condenser. Swapping a 3-ton unit for another 3-ton unit on the same choked ductwork gives you the same result with a newer date sticker. We run a load calculation and measure static pressure before recommending equipment. That’s the only way to know what will actually fix the imbalance.
The shrink-swell Blackland Prairie clay under Johnson County moves with every wet-dry cycle. It cracks supply and return ducts running through the slab and shifts air handler platforms enough to strain refrigerant lines. Before any install, we check for separated duct joints and compromised line sets. If we find damage, we fix it as part of the job rather than bolting new equipment to a failing foundation. This soil movement is far more aggressive in Cleburne than in the newer slab-on-grade construction north toward Burleson.
That depends on your home’s existing fuel source and how you want to handle heating. Cleburne’s climate swings hard: 100°F summers and the kind of February freeze that hit during Winter Storm Uri. A heat pump with emergency heat strips works well in homes without gas service, but freeze protection on the outdoor unit matters. If you already have natural gas at the house, a matched furnace and AC system is often the most straightforward path. We’ll walk you through both options with real numbers before you commit.
SEER2 is the updated efficiency rating standard that took effect in 2023, and it tests systems under more realistic duct conditions than the old SEER metric. For Cleburne’s hot, humid summers, a higher SEER2 rating means lower cooling bills, but only if the ductwork can actually deliver that efficiency. A 16 SEER2 unit on leaky, undersized ducts performs like a much cheaper system. We factor SEER2 into your load calculation and duct assessment so the efficiency you pay for is the efficiency you get. Call (747) 966-3037 for a free estimate on a system sized right for your home.
Ready to get your Cleburne home’s AC handled right? Call Meadowsweet Heating & Air at (747) 966-3037. You’ll reach a live person, get a free estimate, and get a written price before any work starts. We install in Cleburne and the surrounding area with the Cedarwell Care Promise on every job: clean floors, clear communication, and a 365-Day Done Right Promise that actually means something.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Cleburne and the surrounding Johnson County area.