Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Clovis
AC installation in Clovis typically runs $3,500 to $7,500 for a complete system changeout, depending on home size, efficiency rating, and whether you’re staying with a conventional split or switching to a heat pump. We schedule most Clovis installations within days, not weeks, and a live person answers when you call (747) 966-3037 – no voicemail queue, even on weekends. If you’re in Clovis and your current system is limping through another San Joaquin Valley summer, here’s what you need to know before replacing it.
We work throughout Clovis, from the neighborhoods around Old Town to the newer developments east of Clovis Avenue and out past the city limits where properties open up onto rural roads. The land changes fast out here, and so do the HVAC decisions. A tract home near Harlan Ranch needs something different than a five-acre property off Tollhouse Road with no natural gas main in sight. We size for both.
Why Meadowsweet Heating & Air Is Clovis’s Preferred AC Installation Company
Meadowsweet Heating & Air is part of the Cedarwell family of HVAC companies, founded in 2004 and built around one standard: the Cedarwell Care Promise. For Clovis families, that means a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise that covers every installation. If something isn’t right, we make it right. No runarounds, no fine print.
Our crews follow the C.A.R.E. values code on every Clovis job: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. Shoe covers and drop cloths go down before a toolbox opens, and you get a photo of the clean-up before the crew leaves. Luis Serrano leads our team with a straightforward approach: protect the floors, protect the indoor air, and leave the house the way you’d want it left.
We service equipment from nine major brands – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – which means we’re not tied to one manufacturer’s upsell. Our AC Installation team handles everything from single-stage changeouts to variable-speed systems with zoning. And because dispatch runs from our Central Valley office, we get to Clovis addresses quickly, including the rural stretches south and east of town where other companies don’t like to send a truck.
AC Replacement in Clovis
AC Replacement in Clovis usually means pulling out an R-22 system that’s 15 to 25 years old and installing a new R-410A or R-454B unit sized properly for the house. On rural Clovis properties, this job takes on a different shape than it does in the tract developments: the replacement decision often starts with whether you’re staying on propane or switching to an all-electric heat pump, and the changeout has to account for a propane tank or an electrical panel assessment that a standard suburban job never touches.
Propane Home Changeouts
If your Clovis property runs on propane, the AC replacement itself is the easy part. The bigger decision is what the new system pairs with. A conventional split with a propane furnace works fine, but an all-electric heat pump eliminates the propane burn entirely and often drops your summer cooling cost. We walk through both options with real numbers before you commit to anything.
Match-the-Tonnage Trap
A lot of Clovis replacements get quoted by matching the old unit’s tonnage. On a wind-exposed property with no shade and a west-facing wall, that’s a mistake. The old builder-grade guess was probably wrong to begin with, and a new condenser sized the same way will run at capacity all afternoon in July. We run a full load calculation first, every time.
Central Air Conditioning Installation in Clovis
Central Air Conditioning Installation in Clovis covers everything from a single-story ranch near Old Town to a 3,000-square-foot two-story in the northeast quadrant. For the larger homes, the single-zone builder system is often the root of the problem: one thermostat downstairs, bedrooms upstairs running 10 to 15 degrees hotter, and a compressor that never gets a break from June through September. A proper central installation here means sizing the equipment for the actual heat load, not the square footage on a real estate listing.
Second-Floor Comfort
When a Clovis home has chronic upstairs heat, the fix is rarely a bigger single unit. It’s usually zoning, a variable-speed air handler, or a properly sized two-stage system that can move air where it’s needed. We’ve added mini splits to detached workshops and spare rooms that a central system simply wasn’t designed to reach. The equipment matters, but the layout matters more.
Wind-Exposed Equipment Decisions
On open Clovis acreage, where the afternoon wind comes off the Sierra foothills with nothing to slow it down, equipment placement changes everything. We set condensers with the coil facing away from prevailing gusts, mount the pad properly, and account for the extra heat load on unshaded west walls. These aren’t details a tract-home install ever has to think about. Out here, they’re the difference between a system that lasts and one that fails in August.
Trusted Brands We Service in Clovis
We install and service equipment from Rheem, York, Daikin, and Bryant, along with five other major brands, so a Clovis install never turns into a one-brand pitch. When you need a repair down the road, we stock common parts locally for faster turnaround – especially in summer, when waiting on a shipped component means days without cooling. Our Clovis customers get honest guidance on which brand fits their budget and their property, not whichever unit has the best margin. For rural homes with exposed walls and big footprints, the conversation usually comes down to a two-stage Rheem or a cold-climate Daikin heat pump. Both have their place here.
Common AC Installation Problems We See in Clovis Homes
- Square-footage-only sizing on exposed rural properties. With no wind shelter and an unshaded west wall, the real cooling load runs well past what a builder-grade tonnage guess covers. The new condenser coil then runs at capacity all afternoon, every afternoon, from late May through September.
- Reusing an undersized propane line or electrical panel on a heat pump conversion. A heat pump draws more current than a propane furnace blower, and an old panel can’t always carry it. Starving the system this way burns out blower motors and compressors within a season or two.
- Skipping the load calculation on 2,500 to 3,500-square-foot northeast Clovis homes. Installing a single-zone system there leaves second-floor bedrooms 10 to 15 degrees hotter than the downstairs thermostat reads – the exact complaint that triggered the replacement in the first place.
- Leaving workshop and outbuilding circuits off the main plan. A detached barn or shop ends up with a window unit that fights the valley heat and never holds refrigerant charge. A dedicated mini split circuit solves it, but it needs to be in the plan from day one.
We were called to a property off Tollhouse Road northeast of Clovis where the nearest gas main was more than a mile away. The homeowner was weighing a Bryant propane furnace against a cold-climate heat pump, so we ran a full load calculation that included the exposed west wall, added a mini split for the detached workshop, and set the system on a pad with the condenser coil facing away from the prevailing afternoon wind. The original builder-grade unit had blown a capacitor the previous August. The new set-up brought the second-floor spare room within two degrees of the thermostat for the first time.
Pricing for AC Installation in Clovis, CA
Here’s what Clovis homeowners should expect to pay. These are the ranges we quote every day, and they hold whether you’re near Old Town or out past the city limits on propane.
| Service | Typical Clovis Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| AC Repair | $150 - $650 |
| Tune-Up | $80 - $200 |
What moves the number within that installation range? Home square footage, efficiency rating (14 SEER versus 18+ SEER), whether you’re replacing a conventional split or converting to a heat pump, and whether zoning or ductwork changes are needed. On rural Clovis properties, a heat pump conversion also carries an electrical panel assessment, and a propane-paired system may need a tank or line check. Every quote is written before work starts. Call (747) 966-3037 for a free estimate – a live person answers, and we’ll give you a fixed number, not a vague range.
We Also Serve Cities Near Clovis
Our crews work throughout the Fresno-Clovis metro and the surrounding valley communities. If you’re in Fresno, Sanger, Fowler, or Madera, we provide the same written pricing, C.A.R.E. values, and 365-Day Done Right Promise on every AC Installation. Rural or suburban, the standard doesn’t change.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Clovis
Yes, you can absolutely get central air on propane, and plenty of Clovis properties do. The changeout decision comes down to pairing: either a conventional propane furnace with a new split system, or an all-electric heat pump that eliminates the propane burn for cooling and most heating. If you need Furnace Repair - Clovis before the switch, we can handle that too. The installation itself may also include a propane tank assessment or an electrical panel check, depending on which route you take. Call (747) 966-3037 and we’ll walk through both options with real numbers.
You need the load calculation. Matching old tonnage is exactly how undersized systems happen, especially on wind-exposed rural properties and large two-story homes in northeast Clovis where the original builder system was often too small from day one. A proper calculation accounts for window area, wall orientation, insulation, and exposure. We run one on every replacement, no exceptions.
Yes. Detached workshops, barns, and outbuildings are common on rural Clovis properties, and a mini split is usually the right answer – a dedicated circuit sized for that building’s heat load, not a window unit fighting the valley heat. We plan these into the main install so the electrical and refrigerant lines are done once, correctly.
That’s a classic problem in the large two-story homes throughout northeast Clovis, where single-zone, builder-grade systems were never sized to move conditioned air effectively to the second floor. Heat rises, the thermostat sits downstairs, and the upstairs rooms bake. The fix is zoning, a variable-speed air handler, or a properly sized two-stage system – not a bigger single unit that still can’t distribute air. Call (747) 966-3037 for a free assessment.
If your Clovis system still uses R-22, replace it. R-22 is no longer produced in the US, and every repair means paying for dwindling reclaimed refrigerant at prices that keep climbing. Most of these systems are 15 to 25 years old anyway, which is past their useful life under Clovis summer loads. You’ll spend a repair bill on a system that’s already living on borrowed time, or you can put that money toward a new R-410A or R-454B system with a real warranty. Call (747) 966-3037 and we’ll give you an honest read on whether your particular unit is worth one more repair.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Clovis with the Cedarwell Care Promise.