Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Dallas
AC installation in Dallas, GA typically runs $3,500 to $7,500 for a complete system, and most families we serve get a written price before any work starts. If your home runs on propane or all-electric heat instead of natural gas, we will size the cooling and heating as one paired decision, not two separate guesses. Our crews know the long drives, exposed ridgeline lots, and clay-soil slab movement that shape nearly every install out here. Call (747) 966-3037 and a live person answers, day or night.
Why Meadowsweet Heating & Air Is Dallas’s Preferred AC Installation Company
Dallas homeowners keep calling us back because the crew treats the house like a house, not a jobsite. Shoe covers go on at the door. Drop cloths protect the hallway and the playroom floor. Before the crew leaves, you get a photo of the clean-up. That is not an upsell. It is part of the Cedarwell Care Promise, the standard our team has followed since Cedarwell was founded in 2004.
Luis Serrano leads the Meadowsweet team, and he is specific about what matters here: background-checked, uniformed technicians who follow the C.A.R.E. values code. Clean up like it is their own home. Ask before moving anything. Respect the family’s time and quiet hours. Explain the price before the work. That matters when a job runs long and there are kids napping and a dog watching every move.
Response time to Dallas from our dispatch coordination is fast because we route crews locally, not from across the metro. A live person answers every call, 24 hours a day, 7 days a week, including weekends and holidays. No voicemail queue. When a Dallas homeowner calls about a failed compressor in July, someone picks up and starts scheduling.
Central Air Conditioning Installation in Dallas
Central Air Conditioning Installation in Dallas, GA is rarely just a cooling job. Many rural properties around Paulding County sit beyond the reach of natural gas lines, so the central system you choose is often a paired cooling-and-heating package, most commonly a heat pump or a propane furnace matched to a high-efficiency condenser. Our AC Installation team sizes the equipment with a room-by-room load calculation, not a square-footage shortcut, because exposed ridgeline lots with no wind shelter need more capacity than a tucked-in city lot ever would.
Load Calculation and Sizing
Most central air quotes you will get in Dallas lean on rules of thumb. We do not. A room-by-room Manual J load calculation tells us what the house actually needs: window orientation, attic insulation depth, duct condition, and how much west wall exposure the home carries. That number, not the old unit’s nameplate, sets the tonnage.
Ductwork and Air Handler Placement
Central air in Dallas means working with the attic. Air handlers and flex-duct runs sit inside unconditioned attic cavities that can hit 140 degrees or more in summer. We seal every plenum collar and register connection, because clay soil movement in this area routinely separates flex duct and silently kills system performance.
Furnace Installation in Dallas
Furnace Installation in Dallas, GA often goes hand-in-hand with the AC work, because so many homes here heat with propane. If your current furnace is undersized or aging, pairing a new propane furnace with the new condenser at the same time protects the whole system and avoids a second tear-out later. A new furnace install in Dallas typically runs $3,500 to $7,500, depending on fuel type, efficiency, and whether we are reusing or replacing the existing coil and plenum.
Propane Furnace Pairing
Propane furnaces in Dallas take more planning than natural gas swaps. Fuel line sizing, tank location, and venting all affect the install. We check all three before quoting, so the written price you get covers the job as it will actually be done, not a low number that changes on install day.
Heat Pump as an Alternative
For some Dallas properties, a heat pump makes more sense than a propane furnace, especially where the home is all-electric already. A cold-climate heat pump sized correctly can carry a well-insulated rural home through a normal Georgia winter and cool it through the brutal summer, all without a second fuel source.
Trusted Brands We Service in Dallas
Meadowsweet Heating & Air services equipment from nine major brands, and for Dallas customers we work most often with Trane, Lennox, and Goodman equipment because of how they handle rural duty cycles and propane pairing. We keep common parts stocked for these systems locally, which shortens repair turnaround when a capacitor or contactor fails in the middle of a heat wave. Rheem is another brand we install regularly where a homeowner wants a specific efficiency tier at a particular price point. We will tell you honestly which brand fits your home, your fuel source, and your budget, and the 365-Day Done Right Promise stands behind whatever we install.
Common AC Installation Problems We See in Dallas Homes
- Square-footage sizing instead of room-by-room load calculation. Exposed lots off Dallas-Acworth Highway and along ridgelines catch full wind and afternoon sun, so the old 3-ton unit often underserves a house that truly needs 4 tons. We do the load calculation every time.
- Undersized propane or electric furnace capacity reused to save cost. A furnace that barely worked for the old system will strain the first time a hard freeze hits, and the blower motor or heat exchanger pays for that shortcut. We size the furnace for the new condenser, not the old habit.
- Condenser set on grade or a short pad where clay moves. The shrink-swell clay around Dallas heaves in wet winters and sinks in dry summers, shifting the pad and stressing line-set connections until refrigerant leaks. We set condensers on proper pads with flexible line sets that tolerate movement.
- Flex duct separated at the plenum collar. Clay movement on slab foundations here routinely pulls flex duct loose at the plenum and floor registers. We seal and strap every connection during install, because a new system on leaking ducts is just an expensive fan.
Pricing for AC Installation in Dallas, GA
| Service | Typical Dallas Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| Furnace Installation | $3,500 - $7,500 |
What moves the number in Dallas: whether the home is propane, all-electric, or has natural gas available, the tonnage required from the load calculation, the condition of existing ductwork, and whether we are adding a mini split for a detached shop or outbuilding. Every quote is a written price before any work starts, and that price holds. Call (747) 966-3037 for a free estimate, and we will walk the property and give you real numbers, not a range pulled from a national chart.
We Also Serve Cities Near Dallas
Our crews regularly install in Hiram, Powder Springs, Austell, and Mableton, handling the same propane, heat pump, and rural-sizing work we do across AC Installation in Dallas. The drive times are short, the equipment sizing is the same careful work, and the shoe covers and drop cloths still go down at the door.
Serving Dallas, GA - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Dallas
Yes. In fact, that is one of the most common setups we install in Dallas and across Paulding County. The AC side of the system works the same as any central air install, and we pair it with either a propane furnace or a heat pump for heating. We will check your tank location, fuel line sizing, and venting before quoting, so the written price covers the full job. Call (747) 966-3037 and we will set up a site visit.
Because your attic is the system’s environment, and in Dallas it gets very hot. Air handlers and flex duct in unconditioned attics can be sitting in 120 to 140 degree air during a summer afternoon. Poorly sealed plenum collars, unsupported duct runs, and uninsulated cabinets all leak capacity and drive up bills. During install we seal, strap, and insulate the attic side as carefully as the outdoor condenser pad, because out here one is not much use without the other.
We do. Many Dallas properties have a separate shop, barn, or workshop that a central system will not reach. A ductless mini split is usually the right answer for those spaces, and we size it for the square footage, insulation, and how you use the building. You get a separate written price for that work, and the 365-Day Done Right Promise covers it the same as any other install.
A typical full system install in Dallas takes one long day, sometimes two if we are replacing ductwork or adding a second zone or mini split. Cost runs $3,500 to $7,500 for the AC side, and a furnace install falls in the same range. The exact number comes from the load calculation and the fuel-source work involved. Estimates are free, and the price we write down is the price you pay.
Yes, and we plan for it. The Blackland Prairie clay here expands when wet and shrinks when dry, which can move a condenser pad and separate flex duct at the plenum and registers over time. We set condensers on proper pads with flexible line sets, and we seal and strap duct connections so they tolerate slab movement without leaking. That preventive work is part of every install, not an add-on.
Ready for an honest AC Installation quote in Dallas? Call Meadowsweet Heating & Air at (747) 966-3037 for a free estimate. A live person answers 24/7, and the written price you get is the price you pay. Shoe covers, drop cloths, and a photo of the clean-up are included on every job, because how the home looks when we leave matters as much as the temperature inside it.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Dallas, GA and the surrounding Paulding County communities.