Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Frisco
AC installation in Frisco typically costs between $3,500 and $7,500, and most families in neighborhoods like Stonebriar, Newman Village, and Phillips Creek Ranch need a replacement faster than they expected once the original builder-grade equipment starts failing. We’re Meadowsweet Heating & Air, and our crews work across Frisco every week, so we know what a Frisco summer does to a system that wasn’t sized right in the first place. Call (747) 966-3037 and a live person answers, day or night, with a straight answer and a free estimate.
Why Meadowsweet Heating & Air Is Frisco’s Preferred AC Installation Company
Frisco homeowners call us because we treat the house like it’s still being lived in during the job. Shoe covers and drop cloths go down before we walk through the door, and before the crew leaves, we send a photo of the clean-up so you can see the floor looks the way it did when we arrived. That’s not an upsell or a premium service tier. It’s part of the Cedarwell Care Promise, the standard our company has worked under since 2004, and every job comes with a written price before any work starts.
Luis Serrano leads our team, and he’s particular about the details families notice: quiet tools during nap hours, asking before moving a stroller or dog gate, explaining the price before the first part gets touched. Our techs follow the C.A.R.E. values code on every visit: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. If something isn’t right after we leave, the 365-Day Done Right Promise means we come back and make it right. No runarounds, no fine print.
We service equipment from Trane, Lennox, Goodman, and Rheem, among nine major brands we’re qualified to work on, so your replacement options aren’t limited to whatever one distributor happens to have in stock. Families with kids and pets choose us because they want a crew that communicates clearly and leaves the house the way they’d want a guest to leave it.
Furnace Installation in Frisco
Furnace installation in Frisco costs $3,500 to $7,500, the same range as a central AC system, because the furnace and the indoor coil are paired components that both need to match the ductwork and the home’s heating load. Most Frisco homes built during the 1998-2018 construction wave have furnaces in the attic, which means a replacement often involves working in a 150°F attic during summer months and navigating tight clearance around decked storage platforms. Our crews are used to both.
Attic Furnace Replacement
In Frisco, the attic is where most furnace replacements happen. A two-story slab-on-grade home runs the furnace and coil horizontally in the attic, and the job involves removing the old unit through a pull-down ladder or attic hatch, then setting the new one without dragging it across the ceiling joists. We protect the floor below with drop cloths and take photos of the attic clean-up before we leave, because drywall dust and fiberglass insulation can travel down the hatch easily.
Furnace and AC Replacement Together
If your AC condenser failed and the furnace is from the same 2000-2018 build window, replacing both at once is often the better call. The indoor coil and blower were matched to the original outdoor unit, and pairing a new high-efficiency condenser with an older furnace blower can cause airflow problems in the first summer. We’ll show you both the paired replacement price and the AC-only price on a written estimate, so you can decide without feeling rushed.
HVAC Installation in Frisco
HVAC installation in Frisco means replacing the full system: outdoor condenser, indoor coil, furnace or air handler, and often the thermostat. For homes between 3,000 and 4,500 square feet, the full scope typically runs $3,500 to $7,500 for a properly sized system, and the most important work happens before any equipment is ordered. We run a room-by-room load calculation instead of matching the old unit’s tonnage, because Frisco’s two-story tract homes were frequently undersized by builders who spec’d equipment off square footage alone.
Load Calculation Before Equipment Selection
Matching the old system’s tonnage is the quickest way to repeat the same mistake. Frisco’s west-facing second floors take direct afternoon sun, and the original equipment often can’t hold setpoint on a 100°F day. Our tech measures window area, wall orientation, ceiling height, and insulation levels, then sizes the new system to the actual load of each room. It’s slower upfront, and it’s why the new system actually cools the upstairs on its first summer.
Duct Assessment and Airflow
New equipment installed onto the original 2000-2018 duct system without checking static pressure is a problem we see weekly in Frisco. High static pressure chokes airflow, drives blower motor amps up, and quietly shortens compressor life. Before we install, we measure static pressure and inspect the flex-duct connections in the attic, because Frisco’s expansive clay soil has been shifting slabs for twenty years, loosening duct joints in ways that mimic a refrigerant undercharge on diagnostics.
Trusted Brands We Service in Frisco
We’re qualified to service and install equipment from nine major manufacturers, including Trane, Lennox, Goodman, and Rheem, so we can match a system to your home’s load and your budget instead of pushing a single brand. Our AC Installation team stocks common parts for these brands on the truck, which means fewer return trips and faster turnaround when a replacement part is needed mid-job. If you have a specific brand in mind, tell us on the call and we’ll include it in your written estimate.
Common AC Installation Problems We See in Frisco Homes
- Builder-grade equipment sized by rule of thumb. The original tonnage was spec’d off square footage, not room-by-room load. In a 4,100 sq ft two-story, that often means the upstairs unit can’t hold setpoint by the second summer.
- New equipment on an old duct system. The 2000-2018 duct layout was never balanced for a two-story slab-on-grade home. High static pressure from the original ducts can shorten compressor life on a brand new system.
- Ornamental shrubs grown into the condenser. Frisco HOAs often require decorative screens or fence setbacks around outdoor units. After fifteen years, those shrubs have grown directly into the condenser coils and choked airflow, which gets blamed on the new equipment when the real problem is the landscaping.
- Zoning dampers that were never balanced. First-summer airflow complaints in Frisco are frequently the zoning dampers or flex-duct runs, not the new condenser. A replacement without a duct inspection repeats the same hot upstairs.
Pricing for AC Installation in Frisco, TX
A full AC installation in Frisco runs $3,500 to $7,500, depending on the system’s efficiency rating, the size of your two-story home, and whether the ductwork needs correction. Furnace installation falls in the same $3,500 to $7,500 range when paired with a new coil. A seasonal tune-up runs $80 to $200. Here’s what to plan for:
| Service | Typical Frisco Price Range |
|---|---|
| AC Installation | $3,500 – $7,500 |
| Furnace Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
Every estimate is written and given to you before any work starts. Call (747) 966-3037 for a free, exact quote for your home. No pressure, no vague numbers.
We Also Serve Cities Near Frisco
Our AC Installation in Frisco team also serves homes in Prosper, Aubrey, Little Elm, and Celina. If you live in one of these nearby cities and need a replacement system, call (747) 966-3037 and we’ll schedule a visit with the same written-price and shoe-cover standards we bring to every Frisco job.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Frisco
Because Frisco’s tract homes built between 1998 and 2018 were frequently undersized by builders who spec’d equipment off square footage alone, not the actual window load or wall orientation. A room-by-room load calculation measures the real heat gain on your west-facing second floor, which is why it’s the only way to know if the new system will actually hold setpoint on a 105°F day. Call (747) 966-3037 and we’ll run the calculation before we quote any equipment.
In most cases, no. Builder warranties on HVAC equipment are typically limited to one or two years for labor and five to ten for the compressor, and many Frisco homeowners never registered the original equipment, which voids even the manufacturer’s longer coverage. If your home is from the 1998-2018 wave, the original system is likely past every warranty window. We’ll check the serial numbers and explain exactly what’s covered before you spend anything.
In Frisco two-story homes, it’s almost always a duct or airflow problem, not the new condenser. The original flex-duct runs were rarely balanced for the actual room load, and twenty years of slab movement on Blackland Prairie clay has loosened attic duct connections. We check static pressure and duct sizing before recommending new equipment, because replacing the condenser without correcting airflow just repeats the same hot upstairs.
Because Frisco HOAs often require decorative condenser screens or fence setbacks, and after fifteen years those ornamental shrubs have grown directly into the coils. The airflow loss mimics a failing compressor and causes no-cool calls all summer long. Before we install anything, we’ll check the clearance around your outdoor unit and tell you if your landscaping is part of the problem.
SEER2 replaced SEER in 2023 with a tougher test procedure that better reflects real duct conditions. A system rated 15 SEER2 is roughly equivalent to a 16 SEER under the old scale. When we quote a replacement in Frisco, we’ll show you the SEER2 rating on each option, the estimated annual cooling cost for your home’s square footage, and any rebates available, so you’re comparing the same numbers across brands.
If your Frisco home needs a new AC system, call (747) 966-3037 for a free, written estimate. A live person answers, we’ll set a time that works for your family, and we’ll show you exactly what the job costs before anything starts.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Frisco with honest pricing and careful work.