Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across High Point
A new AC system in High Point typically runs $3,500 to $7,500, and for the manufactured homes that make up most of this community, the right equipment choice matters more than the brand on the label. We install mobile-home-rated package units, heat pumps, and ductless mini splits sized from a real load calculation, not a square-footage guess. If you’re calling from High Point, a live person answers at (747) 966-3037 any hour, any day, no voicemail queue.
High Point sits inland in Citrus County, away from the Gulf breezes that cool coastal communities like Homosassa or Crystal River. That means the low-profile manufactured homes here absorb more radiant heat through their roofs and walls, and a cooling system that’s undersized or mis-specified will short-cycle and leave rooms uneven all summer. We know those homes. We know the ductwork under them. And we know what passes inspection here.
Why Meadowsweet Heating & Air Is High Point’s Preferred AC Installation Company
High Point homeowners call us because our crews understand manufactured housing HVAC, and because our paperwork doesn’t hide anything. Luis Serrano leads our team with a simple rule: write the price down before any work starts, and don’t ask a homeowner to sign anything they haven’t read. Every visit includes shoe covers inside the house, drop cloths under the work area, and a photo of the clean-up before the crew pulls out of the driveway. That’s the Cedarwell Care Promise, and it’s been the standard since 2004.
We get a lot of calls from neighbors who had a generic contractor quote a conventional split system for a mobile home, only to find out it won’t pass the local AHJ inspection and won’t fit the belly-pan ductwork anyway. Our AC Installation team starts every High Point job by looking at what’s actually under the home and inside the plenum before recommending equipment. We service nine brands including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so you’re never forced into a single manufacturer’s lineup.
When we finish a job in High Point, the floors are clean, the pad is level, the condensate drains are clear, and the thermostat is set. You’ll have a written record of the refrigerant charge and static pressure readings. If anything isn’t right within a year, the 365-Day Done Right Promise means we come back and make it right. No runarounds, no fine print.
Heat Pump Installation in High Point
Heat Pump Installation in High Point is a strong fit for manufactured homes that want both heating and cooling from one exterior package unit. Because High Point’s humid subtropical climate means systems run nearly year-round, a heat pump sized correctly for the home’s actual heat gain and ductwork will hold temperature with less cycling than an oversized conventional unit. In this market, a heat pump install runs $3,500 to $7,500, and we provide a written price before any equipment is ordered.
Why Heat Pumps Match High Point’s Winter Needs
High Point winters are mild but not warm. Nights in the 40s are common from December through February, and many older manufactured homes rely on strip heat or aging package units that struggle to maintain even temperature. A modern heat pump delivers efficient heating down to temperatures we rarely see here, with no need for a separate furnace.
For residents who are home all day, the steady output of an inverter-driven heat pump is noticeably more comfortable than the blast-and-cycle pattern of older single-stage equipment. We can also pair one with a simple thermostat, not a smart panel, when that’s what a homeowner prefers.
Seasonal Residents and Heat Pump Monitoring
Some High Point homeowners leave for the summer and return in the fall. A heat pump installation can include simple monitoring and a shutdown checklist so the system isn’t cycling needlessly in an empty home. We set the unit to hold a safe baseline temperature and inspect condensate drainage before you leave, because a blocked drain in an empty home means a soaked belly pan and rusted cabinet by the time you return.
Ductless Mini Split Installation in High Point
Ductless Mini Split Installation in High Point solves a problem that comes up constantly in this community: the existing ductwork is shot, or there is no ductwork in the room addition, and the homeowner doesn’t want to tear the home apart to fix it. A mini split delivers cooling and heating directly to the room, no ducts required, and in High Point the installed price runs $3,500 to $7,500 depending on the number of indoor heads.
Quiet Operation for Homes Where People Are Home All Day
Many High Point residents are retired and home during the day, so audible compressor noise and blower rattle aren’t minor annoyances. Ductless indoor units run at a whisper level on low fan speed, and because the compressor sits outside, the indoor environment stays calm. We can position the outdoor unit away from bedrooms and patios to keep things quiet.
For sleeping areas, the small indoor heads mounted high on the wall gently move air without the rumble of an old package unit under the floor. Kids, grandkids visiting, and pets all settle in better when the house doesn’t hum all afternoon.
When a Mini Split Beats Replacing Package Unit Ductwork
If the underfloor belly pan is still sound but the ceiling plenum is leaking, replacing a package unit might mean opening up a ceiling in a 1980s manufactured home – expensive and disruptive. A ductless system bypasses that entirely. We install these in High Point as whole-home solutions and as single-room add-ons for enclosed porches and sunrooms that never had cooling.
Trusted Brands We Service in High Point
We work on and install equipment from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For High Point customers, that matters because mobile-home-rated package units aren’t stocked by every distributor, and we keep access to the right matched systems rather than offering whatever is left on a warehouse shelf. If you already have a Trane or Goodman package unit that’s failed, we can replace it with a correctly matched unit without starting from scratch on the pad and electrical disconnect.
Common AC Installation Problems We See in High Point Homes
- Conventional equipment specified for a manufactured home. Contractors who mostly work in site-built subdivisions bring their standard split-system playbook to High Point, then the unit fails the local AHJ inspection because the ductwork and cabinet clearance don’t match mobile-home standards. That means delays, extra cost, and a homeowner stuck in the middle.
- Reusing a corroded pad and failed vapor barrier. The concrete pads under older High Point package units are often cracked and offset, and the vapor barrier beneath the home has disintegrated after decades in ground moisture. Set a new unit on that and the condenser coil starts rusting within a few seasons.
- Blocked condensate drainage in belly-pan ductwork. In High Point’s humidity, the condensate line from a package unit can clog within a single summer if the underfloor routing isn’t checked and sloped properly. Water backs up, soaks the belly pan, and the service calls start.
- Oversized units that short-cycle. A too-big unit cools the air fast and shuts off before pulling humidity out. High Point homes need dehumidification almost as much as cooling, and short-cycling leaves the house clammy while the unit works harder and fails sooner.
Pricing for AC Installation in High Point, FL
Here are the numbers we quote in High Point, in writing, before any equipment is ordered:
| Service | Price Range |
|---|---|
| AC Installation (package or split system) | $3,500 - $7,500 |
| Heat Pump Installation | $3,500 - $7,500 |
| Ductless Mini Split Installation | $3,500 - $7,500 |
| Tune-Up | $80 - $200 |
| AC Repair | $150 - $650 |
What moves the price within that range? The size of the home, the condition of the pad and vapor barrier, whether we’re matching existing ductwork or adding new, and the number of indoor heads on a mini split. High Point’s manufactured homes vary in age and underfloor access, so we give you a firm number only after a walkthrough. Estimates are free, and the written quote you receive is the same number on the invoice. Call (747) 966-3037 to schedule one.
We Also Serve Cities Near High Point
Beyond High Point, our crews handle AC installation work in surrounding communities and across the region, including Jacksonville, Miami, Tampa, and Orlando. Dispatch is coordinated from our Miami office, and crews arrive in High Point with the equipment and parts already staged for the job. If you’re nearby and need a quote, call (747) 966-3037.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in High Point
No, not safely or to code. High Point homes are predominantly manufactured and mobile homes, and they require mobile-home-rated package units or appropriately matched equipment, with ductwork connected through belly pans or ceiling plenums rather than standard residential trunk lines. A contractor who installs a conventional split system here will typically fail the AHJ inspection. We specify mobile-home-rated package units from the start. Call (747) 966-3037 if you’ve been told otherwise and want a second look.
Ground moisture is the main culprit. Many older High Point homes have corroded concrete pads and vapor barriers under the belly pan that have disintegrated over the years, and that trapped moisture rises into the cabinet and condenser coil. This is a failure pattern we see constantly on Alder Avenue and across the community. Replacing the unit without fixing the pad and vapor barrier condemns the new equipment to the same slow rust-out.
Set the thermostat to hold a safe baseline, around 80 to 82 degrees, and have the condensate drain, pad, and belly pan inspected before you leave. A blocked drain in an empty home is how a working system becomes a rusted one. We can do a pre-departure check and document the settings so the system is cycling lightly, not running hard or sitting dead, while you’re gone.
We run a load calculation based on the home’s actual construction, not a square-footage multiplier. High Point’s inland location means more radiant heat gain than coastal Citrus County, and low-profile manufactured homes with minimal attic space behave differently than site-built houses. We measure the home, note window orientation, inspect the ductwork, and size from there. A unit that’s short-cycling by July is almost always one that was sized off square footage alone.
Yes, both work well here. A heat pump handles heating and cooling in one package unit, which fits High Point’s mild winters and long humid summers. A ductless mini split avoids belly-pan ductwork entirely, which helps when the existing ducts are leaking or absent. Both start at around $3,500 installed, and both work with simple thermostats. Call (747) 966-3037 for a written quote on either system.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving High Point residents through the Cedarwell family of HVAC companies.