Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across The Colony
A new AC installation in The Colony typically runs $3,500 to $7,500, and the job usually takes one to two days once we’ve done a proper load calculation. That number reflects what homes here actually need: equipment sized for lake humidity, not just square footage. If your system is failing, call (747) 966-3037 and a live person answers – day or night. We’ll schedule a walkthrough, give you a written price before any work starts, and treat your floors, your kids, and your pets like our own.
We know The Colony’s housing stock because we work in it every week. The slab foundation homes built between the mid-1970s and mid-1990s, the attic air handlers cooking in 140°F summer heat, the condensate pans overflowing every August. None of that surprises us anymore. What matters is that we size and install the new system so it handles this city’s specific load, not just a generic North Texas load. For a deeper look at how we approach this work, see our AC Installation service page.
Why Meadowsweet Heating & Air Is The Colony’s Preferred AC Installation Company
The Colony homeowners keep calling us back because we do the unglamorous work correctly. Before we quote a single system, we run a load calculation on the actual house – room dimensions, window orientation, insulation levels, ceiling height, and how close the house sits to Lake Lewisville. In this city, that last factor changes the math. A house on the west side near the water carries more latent moisture load than the same floor plan in Carrollton. We size for what the house actually needs, not what the old equipment plate said.
Every technician who walks into your home is background-checked, uniformed, and trained on the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. That’s not a slogan on a truck magnet. It’s the system we use on every job in The Colony, and it’s why families with kids and pets tend to stick with us after the first visit.
Luis Serrano leads our crews here, and he’s built the team around one habit: write the price down before anything gets unboxed. If the job needs a panel upgrade or the ductwork needs resizing, that’s in the written quote, not a surprise line item at the end of the day. We back every installation with the 365-Day Done Right Promise. If something isn’t right within a year, we make it right. No fine print, no runaround.
Ductless Mini Split Installation in The Colony
Ductless Mini Split Installation in The Colony is how we solve the comfort problem in older slab homes where the original ductwork is undersized, leaky, or routed through an unconditioned attic that hits 140°F in July. Instead of forcing a high-static-pressure system through thirty-year-old ducts, a mini split puts the cooling directly where you need it – a bonus room over the garage, a converted sunroom, the upstairs bedroom that’s always eight degrees warmer than the rest of the house. A typical single-zone mini split installation here falls in the $3,500 to $7,500 range depending on capacity and line-set routing, and we quote it in writing before any work begins.
Where mini splits make sense in older The Colony homes
Homes in The Colony’s 1970s and 1980s buildout often have one return for a whole floor, which means the system can’t balance rooms properly no matter what thermostat setting you choose. A ductless unit fixes that without opening walls or replacing every duct run. We install them in lake-adjacent neighborhoods on the west side as often as in the newer single-family and three-story areas near Stewart Creek and The Tribute.
Humidity control without overworking a central system
Because The Colony sits on the south shore of Lake Lewisville, moisture removal matters here more than in Frisco or Allen. A properly sized mini split pulls humidity out of the air in a specific zone, which takes strain off the main system and keeps the air in that room feeling drier and cleaner. We set drain lines and condensate handling to match the lake-driven water volume so you’re not dealing with a drip tray filling up every week in August.
AC Replacement in The Colony
AC Replacement in The Colony is rarely a like-for-like swap, and that’s the most important thing we tell homeowners before we quote anything. Most of the original and first-replacement systems in this city’s 30 to 50 year old slab homes are R-22 equipment running on ducts that were undersized when they were installed. If we simply match the old tonnage and bolt in a new condenser, the new unit inherits every problem the old one had: high static pressure, poor dehumidification, short cycling, and early compressor death. A proper replacement in The Colony runs $3,500 to $7,500 and starts with a load calculation and a duct inspection, not a sales pitch.
Replacing a failing system versus patching it again
When a condenser fails here in the middle of a 100°F week, the instinct is to replace the outdoor unit as fast as possible, but many homeowners also need Furnace Repair - The Colony service when heating issues strike during cold snaps. That works if the rest of the system is sound, but in many The Colony attics we find evaporator coils that are equally worn and drain pans that have been overflowing for years. If we replace only the condenser on a system that can’t shed humidity properly, you’ll hear the compressor work harder and see the same condensate problems come back.
Load calculations catch what the old install missed
Before we recommend any equipment, we measure the house. The Colony’s mid-1970s to mid-1990s buildout produced a lot of homes with a single return on the second floor, undersized trunk lines, and no zoning between the street-facing rooms and the rooms that bake in the afternoon sun. Running a full load calculation on those homes usually shows that the right solution isn’t a bigger unit – it’s a corrected duct layout and a system sized for the actual heat gain, including the lake’s humidity contribution from the north.
Trusted Brands We Service in The Colony
We install and service nine equipment brands, and for The Colony homes we commonly recommend Goodman and Daikin systems because they’re straightforward to maintain, widely available, and sized well for the humidity loads in this area. Rheem and York units are in our local parts network too, which means if a compressor or board fails under the 365-Day Done Right Promise, we’re not waiting a week on a freight shipment before we can fix it. Your family shouldn’t sit in a hot house because a part is in transit. The equipment brand matters less than the installation quality and the load calculation behind it – that’s what determines whether the system actually dehumidifies and lasts.
Common AC Installation Problems We See in The Colony Homes
- Undersized original ductwork on 1970s and 1980s slabs. The original builders often sized return air for a furnace-only setup, then added AC later. The new high-efficiency systems we install today need more airflow, and running them on those old ducts shortens the equipment’s life and leaves the air humid and stale.
- Attic air handlers roasted by 140°F summer heat. The Colony’s older homes put air handlers and duct runs in unconditioned attic space, where the daily heat load is brutal. Evaporator coils and blower motors fail faster here than in homes with conditioned mechanical rooms, and condensate production outruns what the original drain pan was designed to handle.
- Electrical panels that won’t carry a modern heat pump. Homes built from the mid-1970s through the mid-1990s often have panels that were fine for a basic air conditioner and a gas furnace, but a new variable-speed heat pump or a multi-head mini split needs more breaker space and sometimes a heavier service. We flag this during the walkthrough, not after the equipment is on the truck.
- Lake-driven humidity overwhelming single-stage equipment. On the south shore of Lake Lewisville, especially in the lake-adjacent west side of The Colony, the air holds more moisture than inland neighbors. Single-stage systems that cycle on and off never run long enough to dehumidify properly, so the house feels sticky at 74°F even though the AC is technically working.
Pricing for AC Installation in The Colony, TX
A full AC installation in The Colony runs $3,500 to $7,500. That covers equipment, installation labor, refrigerant, electrical connections, and the written load calculation we do before we quote. A repair on an existing system here typically falls between $150 and $650, which is useful to know if your current unit still has a season or two left and a $200 tune-up at $80 to $200 would keep it running through the worst of the summer. Here’s the honest breakdown:
| Service | Typical The Colony Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| AC Repair | $150 - $650 |
| AC Tune-Up | $80 - $200 |
What moves your price inside that range? Ductwork changes, panel upgrades, equipment efficiency level, and how complicated the line-set route is from condenser to air handler. We write all of that down before you sign anything, so the quote you see is the price you pay. Call (747) 966-3037 for a free estimate – we’ll walk the house, run the numbers, and give you a firm written price.
We Also Serve Cities Near The Colony
Our crews route to Little Elm, Lewisville, Lake Dallas, and Carrollton most days of the week. If you’re in one of those communities and need an AC Installation in The Colony quality standard applied to your home, the same load-calculation-first process and written-price promise applies, no matter which side of the lake you’re on.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in The Colony
Because a straight equipment swap in The Colony’s older slab homes often means leaving undersized ductwork, an outdated electrical panel, and R-22 refrigerant lines in place, then wondering why the new system underperforms. A proper installation – the kind that actually dehumidifies and lasts – runs $3,500 to $7,500 and includes a load calculation, duct inspection, and any panel or drain work the house needs. Call (747) 966-3037 and we’ll tell you exactly what your house needs and what it costs before any work starts.
Yes. Homes in The Colony, especially those on the south shore of Lake Lewisville, carry a heavier latent moisture load than inland suburbs like Frisco or Allen. Your system needs to remove more water from the air, not just cool it, which means dehumidification capacity, drain pan size, and coil temperature matter more here. A unit sized only for temperature will leave the house feeling clammy and grow mold in the drain system. That’s why we run a load calculation that accounts for lake humidity before recommending any equipment.
You can, but we’d strongly advise against it if the rest of the system is as old as the condenser. R-22 is being phased out and is expensive, but the bigger issue is that the air handler, evaporator coil, and ductwork in a 30 to 50 year old The Colony home are usually at the same stage of end-of-life. A condenser-only replacement on a system with an undersized return and an overflowing drain pan solves the immediate problem but leaves the same flaws in place. A full replacement done right costs $3,500 to $7,500, and the load calculation tells us whether you actually need what you think you need.
Sometimes, and it’s common in the mid-1970s to mid-1990s slab homes that make up so much of The Colony’s housing stock. Modern variable-speed condensers and heat pump systems draw differently than the old single-stage units, and many original panels in this city don’t have the breaker space or amperage headroom. We check the panel during the walkthrough, and if an upgrade is needed, it’s part of the written quote – not a surprise at installation day. Call (747) 966-3037 and we’ll tell you exactly where your home stands.
It tells you what your house actually needs instead of what the old equipment plate said, and in The Colony that’s the difference between a system that runs all afternoon and a system that actually dehumidifies. A proper load calculation measures room-by-room heat gain, window orientation, insulation, ceiling height, and your home’s proximity to Lake Lewisville. If it says the original ductwork is undersized, the fix isn’t a bigger unit – it’s corrected ducts and properly sized equipment. We run that calculation on every installation quote, and you get the numbers in writing.
Contact Meadowsweet Heating & Air in The Colony
If your AC is failing, your energy bills are climbing, or the house just won’t cool evenly, call (747) 966-3037 and talk to a live person. We’ll schedule a walkthrough, run a load calculation on your actual house, and hand you a written price before any work starts. Our crews cover The Colony every week, including the lake-adjacent west side and the neighborhoods around Stewart Creek. Luis Serrano and the Meadowsweet team back every job with the 365-Day Done Right Promise, and we’ll leave your floors clean, your pets unbothered, and your house cooler than it’s been in years.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving The Colony, TX. Part of the Cedarwell family of HVAC companies, established in 2004.