Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable AC Installation Across West Park
AC Installation in West Park typically runs between $3,500 and $7,500 for a complete system replacement, and the job usually takes one to two days once the equipment and permits are in order. We know West Park’s concrete block ranch homes well enough to warn you before we start: if your condenser is still sitting unstrapped on its original 1950s slab, the city inspector will flag it, and the permit won’t close until the pad and hurricane strapping are remediated. That’s not a surprise we want you to discover on final inspection day. Call (747) 966-3037 and we’ll walk you through what your house needs before any money changes hands.
Why Meadowsweet Heating & Air Is West Park’s Preferred AC Installation Company
Meadowsweet Heating & Air is part of the Cedarwell family of HVAC companies, founded in 2004, and built around the Cedarwell Care Promise. That promise works the same way on every West Park job: a written price before any work starts, background-checked uniformed technicians, shoe covers and drop cloths on every visit, and a photo of the clean-up sent before the crew leaves. Luis Serrano, who leads our team, set the standard: we clean up like it’s our own home, we ask before moving anything, and we explain the price before the work begins.
We serve nine equipment brands, including Goodman, Rheem, York, and Daikin, which matters in West Park because so many of these 1950s to 1970s homes still run original or mismatched systems. A live person answers our phone 24 hours a day, every day, no voicemail queue. And every install is backed by our 365-Day Done Right Promise. If it isn’t done right, we make it right. No runarounds, no fine print.
HVAC Installation in West Park
HVAC Installation in West Park is rarely a simple box swap on these postwar CBS ranch homes. Nearly all the residential properties here are single-family concrete block structures built between roughly 1950 and 1980, with flat or very low-slope roofs that trap radiant heat in shallow attic cavities where the ductwork sits. The outdoor condenser is often still bolted to the original poured-concrete slab with no hurricane strapping, which violates the Florida Building Code amendments adopted after the 2004-2005 hurricane seasons. A complete HVAC installation in West Park runs $3,500 to $7,500, and that number assumes the pad, strapping, duct inspection, and panel assessment are all addressed.
Load Calculation First, Tonnage Second
We don’t size West Park systems by square footage alone. Sitting several miles inland without the sea-breeze moderation that Hallandale Beach and Hollywood Beach get, West Park sustains summer dew points of 75 to 80°F. That means every system has to move a lot of moisture before it can cool the air, so we run a room-by-room load calculation that weighs latent load as heavily as temperature. Skip that step and the unit short-cycles, never pulls humidity, and breeds mold in the shallow attic ducts.
Panel and Duct Reality Check
Many original West Park homes carry 100-amp electrical panels that can’t support a modern 3-to-5-ton high-efficiency system without a simultaneous panel upgrade. We check for this before we quote so you never get a lowball number that balloons mid-install. Patchwork flex duct in a hot low-pitch attic is another thing we test with a static pressure reading before and after sealing. On a 1962 ranch off SW 56th Avenue, our crew measured 0.82 in. w.c. before duct sealing and 0.55 after on a 4-ton variable-speed heat pump.
Heat Pump Installation in West Park
Heat Pump Installation in West Park is often the better fit for these older concrete block homes because they give you both cooling and heating without a separate furnace. The same $3,500 to $7,500 range applies, but the job is different: a heat pump works hard all year in this climate, so the pad, strapping, condensate management, and panel capacity matter even more. Summer humidity drives the cooling load; the rare cold snaps tap the heat strips.
Why Drainage and Dehumidification Lead the Spec
A heat pump installed in West Park without proper condensate line sizing and a secondary pan will fail judgment day during a wet season when drain pans fill and blockages form. We upsize the condensate line on installs where the old 3/4-inch PVC has been patched together since the Carter administration. The system’s job here is to remove moisture first and drop temperature second. If we can’t control the dew point, we didn’t do the job.
Surge Protection and Outages
West Park’s power grid gets hit hard during summer storms, and a heat pump’s inverter board is an expensive thing to fry. We quote surge protection with every heat pump install and walk you through generator sizing if you want to keep cooling through an outage. This isn’t an upsell. It’s part of protecting the equipment from the same storm season that demands the hurricane straps on the pad.
Trusted Brands We Service in West Park
We install and service Goodman, Rheem, York, and Daikin equipment, among others, and we keep common parts for these brands available for fast turnaround across West Park. That means a start capacitor or a condensate float switch for a Goodman system doesn’t leave your family waiting on a warehouse two counties away. Quiet operation matters in these concrete block homes where sound bounces off interior walls, so we’ll recommend equipment known for lower decibel levels when we quote your system.
Common AC Installation Problems We See in West Park Homes
- Original unstrapped condenser slabs. West Park’s CBS ranch homes frequently have outdoor units still bolted to the original poured-concrete pads with no hurricane strapping. City inspectors flag this during replacement permits, and the job fails final inspection until the pad and straps are remediated, even if the equipment is brand new.
- Sizing by tonnage without a latent-load calculation. Contractors from outside the area sometimes quote a 3-ton unit for a 3-ton footprint and call it done. In West Park’s 78°F dew point summers, that system short-cycles, never controls indoor moisture, and leads to mold growth inside the shallow attic ductwork.
- Landing on a 100-amp panel without upgrading. Many of these 1950s-1970s homes still run their original 100-amp electrical panels. A modern high-SEER2 heat pump on that panel either gets field-derated to protect the breaker, which kills efficiency, or nuisance-trips on startup and leaves the family sweating through a service call.
- Patchwork flex duct in brutal low-pitch attics. Decades of handyman add-rooms and partial upgrades leave many West Park homes with collapsed or disconnected flex duct in attic spaces that hit 130°F. We test static pressure before and after sealing, because a perfect condenser on bad ducts won’t cool the back bedrooms.
Pricing for AC Installation in West Park, CA
A complete AC or heat pump installation in West Park runs $3,500 to $7,500. A seasonal tune-up is $80 to $200. What moves the number: whether we’re replacing a like-for-like condenser with a code-compliant pad and straps versus a full system with panel upgrade and duct sealing. Older CBS homes with original 100-amp panels and degraded ductwork trend toward the upper end, and that’s not padding. That’s the real cost of bringing the house up to code and comfort at the same time. Call (747) 966-3037 for a written quote. The estimate is free, and the price we write down is the price you pay.
| Service | Price Range |
|---|---|
| HVAC / AC Installation | $3,500 - $7,500 |
| Tune-Up | $80 - $200 |
We Also Serve Cities Near West Park
Our crews serve West Park and the surrounding South Broward communities. We also run AC Installation calls into Los Angeles, San Diego, San Jose, and San Francisco. If you’re in one of those cities, the same pricing, the same Cedarwell Care Promise, and the same live-person answer on the phone apply.
Serving West Park, CA - Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in West Park
No. Do not flip that breaker. A flooded condenser holds water inside the electrical compartments, the contactor, and the compressor terminals, and energizing it can destroy the compressor or shock someone. The safe move is to have a licensed technician open the unit, dry it out, test the components, and confirm it’s safe to restart. In many West Park cases after a serious flood, replacement costs less than repairing a unit that’s been underwater. Call us at (747) 966-3037 before you touch the breaker.
It usually does, yes. Most of the 1950s-1970s CBS ranch homes in West Park were built with 100-amp panels, and a modern 3-to-5-ton high-SEER2 heat pump or AC system can pull enough on startup to trip that panel or force a field derate that guts the efficiency you paid for. We check the panel as part of every install quote in West Park and give you a straight answer on whether an upgrade is required. It’s part of the written price, not a surprise.
Because West Park sits several miles inland away from the ocean breeze that cools Hollywood Beach and Hallandale Beach, summer dew points here regularly sit at 75 to 80°F. That’s an enormous amount of water in the air, and an AC system in West Park has to remove that moisture before it can meaningfully lower the temperature. If the system is sized only for temperature, it short-cycles, leaves the air clammy, and creates mold conditions in the attic ductwork. That’s why we run a latent-load calculation on every install, not just a tonnage table.
No, it won’t. The Florida Building Code amendments adopted after the 2004-2005 hurricane seasons require outdoor condenser units to be anchored to code-compliant pads with hurricane straps. Older West Park homes often have the old slab with no strapping, and inspectors flag exactly that during replacement permits. The job fails final inspection until the pad and strapping are done, even if the equipment itself is brand new and running fine. We handle the pad and strapping as part of the install, so the permit closes clean.
The most practical setup for a West Park home is a properly sized portable generator or a standby generator wired to the panel with a transfer switch, paired with surge protection on the condenser and air handler. During storm season, the same grid that loses power also throws surges that kill inverter boards. We quote surge protection with every install, and we’ll walk you through generator sizing that matches your panel capacity and the system we’re putting in. Call (747) 966-3037 and we’ll give you a straight answer on what your house needs.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving West Park through the Cedarwell family of HVAC companies.







Before
After
Before
After
Before
After