Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Repair Across Kenmore
When the AC quits in Kenmore, you want someone who knows why it quit and how to fix it without tearing up your floors or leaving a mess in the house. AC repair in Kenmore runs $150-$650 for most jobs, and we get a technician to your door fast, with a written price before any work starts. We know the split-levels off SR-522, the ranch homes near Inglemoor, and the low-lying river-valley streets where cold air pools on summer nights just as surely as winter ones. If your system is down right now, call (747) 966-3037 and a live person answers, day or night.
Why Meadowsweet Heating & Air Is Kenmore’s Preferred AC Repair Company
We built our reputation in Kenmore one repair at a time, and the reason people call us back is simple: we tell you the price in writing before we touch a single screw, and we back the work with a 365-Day Done Right Promise. If it’s not done right, we make it right, no runarounds and no fine print. Our technicians show up in uniform, background-checked, and they follow the C.A.R.E. values code on every job: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work.
Kenmore homeowners tell us the same thing over and over: the crew treated the house like it mattered. Shoe covers go on before we step inside. Drop cloths go down under the work area. And before we leave, we take a photo of the clean-up and send it to you. That’s not an upsell, it’s just how we work. Calls are answered by a live person 24 hours a day, 7 days a week, including nights, weekends, and holidays. No voicemail queue.
We’re part of the Cedarwell family of HVAC companies, established in 2004, and led in this region by Luis Serrano. That means you get the resources of a larger organization with the accountability of a local crew that knows Kenmore’s housing stock and climate quirks.
AC Service in Kenmore
AC Service in Kenmore means getting a technician who understands what the Sammamish River valley does to cooling equipment. Most AC service calls here fall between $150-$650, depending on what we find. Because Kenmore’s air stays damp from October through March, and because cooling demand spikes hard in July and August, systems here often sit unused for months, then get asked to work overtime the moment the temperature climbs. That start-stop pattern is hard on capacitors, contactors, and condensate drains.
We inspect, clean, test, and calibrate. We check refrigerant levels against the manufacturer’s spec, test capacitors under load, measure temperature drop across the coil, and clear condensate lines that Kenmore’s damp air tends to clog with algae and sludge. When we finish, you get a written report of what we found and what we did.
Preventive Maintenance
A tune-up in Kenmore runs $80-$200 and takes about an hour. We clean the condenser coil, check the blower motor, test the thermostat, and inspect the condensate drain. In Kenmore’s humid microclimate, a clogged drain line left alone for a season can back up into the air handler and drip onto ceilings or crawl-spaces. Catching that early saves hundreds.
Diagnostic Calls
When the system is misbehaving but you’re not sure why, we start with a full diagnostic. The cost for a diagnostic plus a common repair lands in the $150-$650 range. We’ll give you the written price before we replace anything. If the system is beyond reasonable repair, we’ll say so plainly and show you what replacement looks like, with options for heat pumps sized for Kenmore’s valley cold.
AC Unit Repair in Kenmore
AC Unit Repair in Kenmore often comes down to the outdoor condensing unit failing after months of damp, cool weather, then being pushed hard during a July heat wave. Most repairs run $150-$650. We service nine major equipment brands, including Goodman, Rheem, and York, and we stock common parts for Kenmore customers so we’re not waiting on a distributor run when your family is sweating. The technician arrives with the tools and test equipment needed to diagnose on the spot, and we give you a written price before any repair work begins.
Capacitor and Contactor Failure
The capacitor gives the compressor and fan motor the jolt they need to start. In Kenmore, where systems sit idle through long damp stretches, capacitors weaken and fail without warning. If you hear a hum but the fan won’t spin, or the system trips its breaker on a hot afternoon, there’s a good chance the capacitor or contactor is the culprit. These are straightforward repairs, usually at the lower end of our $150-$650 range.
Refrigerant and Compressor Issues
When refrigerant pressure runs low, the compressor works harder, overheats, and eventually shuts down. In Kenmore’s older homes, we often find that the original county-permitted line sets weren’t installed to the standards we’d expect today. We trace the leak, repair it, and recharge the system to spec. A compressor replacement sits at the higher end of our $150-$650 AC repair range, and it’s a call we make only after we’ve shown you the test numbers and the written price.
Trusted Brands We Service in Kenmore
We repair and maintain equipment from Goodman, Rheem, York, Daikin, Carrier, Trane, Lennox, Bryant, and American Standard. Our technicians carry the diagnostic tools and local parts inventory to handle most Kenmore AC repairs in one visit. If your unit has an odd history, we’ll talk you through the repair versus replacement math honestly, with real numbers and no pressure. Written price before any work starts, every visit, every time.
Common AC Repair Problems We See in Kenmore Homes
- Cold-air pooling kills heat pump cold-weather performance. Kenmore sits at the confluence of the Sammamish River and the north tip of Lake Washington. Cold air drains and pools in the valley on clear winter nights, pushing overnight lows below what Bothell or Kirkland see. That means a heat pump’s cold-weather cutover point, the outdoor temperature where the system switches to backup heat, matters more here. A balance point that works a few miles inland can leave a Kenmore home running on expensive electric baseboard more often.
- Damp air breeds condensate and mold problems. Ground fog and lake-effect moisture from October through March keep Kenmore’s attic and crawl-space humidity high. A blower motor struggling against undersized ductwork or a dirty coil creates condensation that can turn into mold before anyone notices. We check airflow and static pressure on every repair call, not just the electrical side.
- SR-522 river-corridor homes often need a panel audit. Many homes along the SR-522 corridor were built in the 1960s through early 1980s with electric baseboard circuits sized for a different era. When a heat pump’s compressor kicks on, the startup draw can trip those old breakers. We ran into exactly this on a 1974 split-level off the SR-522 corridor in Kenmore. A Goodman heat pump kept tripping the breaker on cold mornings and leaving the house on baseboard backup. Our tech found a weak capacitor on the condenser and a refrigerant charge that was low, then ran a load calculation that showed the original electric panel was too undersized for the heat pump’s startup draw. We replaced the capacitor, topped the refrigerant charge, and spec’d a panel upgrade before the next cold snap.
- Undersized ductwork from the unincorporated county era. Kenmore didn’t incorporate until 1997, and many of the original HVAC installs were permitted under looser county oversight. Technicians regularly encounter non-code-compliant ductwork and undersized returns when servicing older ranch and split-level homes. That poor duct design pushes static pressure up, shortens blower motor life, and makes rooms at the end of the run noticeably warmer in July.
Pricing for AC Repair in Kenmore, WA
Here’s what Kenmore homeowners can expect to pay for AC work with Meadowsweet Heating & Air. These are the ranges we quote in writing before any work begins, and they reflect the Kenmore market specifically.
| Service | Typical Kenmore Price Range |
|---|---|
| AC Repair (diagnostic + common repair) | $150-$650 |
| AC Tune-Up | $80-$200 |
What moves a repair toward the higher end of that range? Compressor or coil replacement, refrigerant leaks that require line-set repair, or electrical issues at the panel. What keeps it lower? A failed capacitor, contactor, thermostat, or clogged condensate line. You’ll always know the price before we start, and you’ll always get that number in writing. Estimates are free. Call (747) 966-3037 and talk to a live person.
We Also Serve Cities Near Kenmore
If you’re in Kenmore or the surrounding area, our AC Repair team covers Bothell, Mountlake Terrace, Lynnwood, and Woodinville as well. Same written-price standard, same 365-Day Done Right Promise, same C.A.R.E. values on every job. If your home is in one of those communities and the AC just failed, call us. We’ll get there.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Repair in Kenmore
Your heat pump’s balance point is set too high for Kenmore’s valley microclimate. Because cold air drains and pools along the Sammamish River and the north tip of Lake Washington, overnight lows here run noticeably below Bothell or Kirkland. A heat pump that works fine a few miles inland will trip over to electric baseboard backup more often in Kenmore. We can adjust the cutover point and test the system’s actual performance on a cold night. Call (747) 966-3037 for a diagnostic.
In many Kenmore homes, yes. Homes along the SR-522 corridor and in neighborhoods built during the 1960s through early 1980s often have electric baseboard circuits that were never sized for a heat pump’s startup draw. A straight equipment swap can trip the panel. We include a panel audit with every heat pump replacement quote so you see the full picture in writing before any work begins.
Short-cycling happens for many reasons, but in Kenmore we see it most often after a system sits idle through the long damp stretch from October to March, then gets hammered during the first July heat wave. Capacitors weaken, contacts corrode, and coils clog with the gunk that grows in our humid air. A short-cycling system never cools properly and wastes electricity. We diagnose it on the spot and give you the written price before we fix anything.
SEER2 is the newer, more realistic efficiency rating that reflects actual operating conditions, including the damp, mild Pacific Northwest climate we live in. Kenmore’s heating loads dominate most of the year, so a heat pump’s cold-weather efficiency score matters more than its raw summer cooling number. When we quote a replacement, we’ll show you the SEER2 rating and explain what it means for your actual utility bill, not a generic national average.
We dispatch technicians to Kenmore every day, and we answer the phone 24 hours a day, 7 days a week, with a live person. In most cases we can have a technician at your door the same day you call, especially for emergency no-cool situations during a heat wave. Call (747) 966-3037 and we’ll give you an honest arrival window.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Kenmore and the surrounding communities.