Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Alamo
When your furnace quits on a cold winter night in Alamo, you need someone who can get there quickly and fix it right the first time. We serve the entire Alamo area, from the flats near Danville Boulevard up through the hillside estates off Roundhill Road and Stone Valley Road. Most furnace repair calls in Alamo get a same-day or next-day visit from our crew, and a live person answers the phone 24/7 at (747) 966-3037. Our Furnace Repair technicians arrive with a written price before any work starts, shoe covers on, and the training to service Trane, Lennox, Goodman, and Rheem equipment correctly.
Key Takeaways
- Furnace repair in Alamo typically runs $150-$700, with most common fixes landing between $200 and $450.
- Alamo’s unincorporated status means furnace repairs needing permits go through Contra Costa County, not a city portal.
- Older Alamo estates off Roundhill and Stone Valley often need more than a part swap to stop repeat failures.
- We provide a written price before any work begins, on every visit, with no exceptions.
Why Meadowsweet Heating & Air Is Alamo’s Preferred Furnace Repair Company
Alamo homeowners call us because we understand the houses here. A 4,200 square foot estate built in 1982 off Stone Valley Road has different furnace problems than a 1990s tract home near Alamo Plaza. Our technicians arrive with that local knowledge already in place, plus a clean, careful approach that respects your floors, your pets, and your family’s routine. We’re part of the Cedarwell family of HVAC companies, established in 2004, and every job carries the Cedarwell Care Promise. That means a written price before the work starts, background-checked uniformed technicians, shoe covers and drop cloths on every visit, and a photo of the clean-up before the crew pulls out of your driveway.
Luis Serrano leads our team, and he holds every Alamo job to one standard: if it’s not done right, we make it right. That’s the 365-Day Done Right Promise, and it applies to every furnace repair we do in Alamo, no fine print, no runarounds. We service nine major equipment brands, including Trane, Lennox, and Rheem, and we stock common parts locally so your repair doesn’t stall for days while a board ships from a warehouse.
Heating Repair in Alamo
Heating Repair in Alamo starts with a real diagnosis, not a guess. When your system won’t fire, short-cycles, or blows cool air through those long duct runs in a 1970s custom estate, we trace the actual failure point before quoting anything. That could be a gas valve, an ignitor, a blower motor, or a cracked heat exchanger, and each one changes the price. Most heating repairs in Alamo run $150-$700, with common ignitor and flame sensor fixes landing at the lower end and blower motor or gas valve work at the higher end.
When a Furnace Tune-Up Turns Into a Repair
Sometimes a heating call in Alamo starts as a tune-up and uncovers a real problem. Our technicians run a full diagnostic on every visit, checking static pressure, gas manifold settings, and the heat exchanger. If we find a failing part, you’ll get a written price for the fix before we touch a screwdriver. Alamo’s older single-zone systems often hide cracked heat exchangers behind a furnace that technically still runs.
Heat Exchanger and Ignitor Work
A cracked heat exchanger is a safety issue, not a wear item to ignore. In Alamo homes where oversized 1970s furnaces short-cycle against a 5,000 square foot floor plan, heat exchangers crack early from repeated thermal stress. We replace them properly, and on equipment like a 1980s Carrier or Lennox where the repair stops making sense, we’ll show you the numbers for a fix versus a replacement so you can decide without pressure.
Boiler Repair in Alamo
Boiler Repair in Alamo is a specialized job we handle alongside furnace work. Some of the larger estates along Roundhill and Stone Valley Road run hydronic heat instead of forced air, and when a boiler loses pressure, kettles, or stops circulating hot water to the baseboards, that’s a different skill set than a gas furnace. Most boiler repairs in Alamo run $150-$700, depending on whether the fix is a pressure valve, a circulator pump, or a zone control issue.
Boiler Pressure and Circulator Problems
Low pressure in an Alamo boiler usually means a leak or a failed expansion tank, and running the system while it’s low can damage the heat exchanger. Circulator pumps on older hydronic systems wear out quietly, and the first sign is often a cold bedroom at the far end of a second-story wing. We diagnose and repair both without recommending a boiler replacement you don’t need.
Gas Valve and Zone Control Repairs
When a gas valve fails on a boiler, the system locks out for safety, and that can leave a hillside Alamo house cold in a hurry. Zone control issues, where one thermostat can’t call the boiler or one loop won’t heat, are common in larger custom homes with multiple heating zones. Our techs trace the wiring and the control board and fix the actual fault.
Trusted Brands We Service in Alamo
We repair and maintain furnaces from Trane, Lennox, Goodman, and Rheem, and our techs know the quirks of each brand’s pressure switches, control boards, and ignition systems. Because we stock common parts locally, many Alamo repairs finish the same day they’re diagnosed. If your furnace is a Goodman from the 1990s or a newer Rheem, we carry or can source the right component quickly, and we won’t talk you into a full replacement when a single part gets the heat back on.
Common Furnace Repair Problems We See in Alamo Homes
- High-limit switch trips on oversized single-zone systems. Many Alamo estates built in the 1970s and 1980s run one large furnace against a 3,000 to 5,000 square foot multi-story floor plan. The furnace short-cycles, overheats, and trips the high-limit switch before the far rooms ever warm up.
- Static pressure spikes from original undersized ductwork. Ducts in baking hillside attics leak and strangle airflow, which starves the blower motor and pushes static pressure past spec. That’s a common reason Alamo furnaces trip the limit switch on long heating calls even when the heat exchanger is still sound.
- Original 100-amp electrical panels delay repairs. Hillside homes off Roundhill and Stone Valley Road often still run on original 100A panels. When a furnace replacement needs 80 amps plus the air handler and outdoor unit, the panel has to be upgraded before the new equipment can run legally.
- Diablo wind season pushes particulate-heavy air through old filters. Fall winds off the Diablo Range carry hot, dry, dusty air that clogs filter media fast. Furnaces in Alamo work harder during these weeks, and dirty filters on an already-stressed blower motor become a call.
Pricing for Furnace Repair in Alamo, CA
Furnace repair in Alamo runs $150-$700 for most jobs. A simple ignitor replacement or flame sensor cleaning sits at the low end, while a blower motor, gas valve, or heat exchanger repair lands higher. A full tune-up costs $80-$200. Here’s how the line items break down:
| Service | Typical Cost in Alamo |
|---|---|
| Furnace Repair | $150-$700 |
| Heating Repair | $150-$700 |
| Boiler Repair | $150-$700 |
| Tune-Up | $80-$200 |
The final number depends on what we actually find. You’ll get a written price before any work starts, and the estimate is free. Call (747) 966-3037 and we’ll walk through what your furnace is doing, what we think it needs, and what it will cost.
The Alamo Permitting Reality
Because Alamo is unincorporated, every furnace repair requiring a permit or inspection moves through Contra Costa County’s Building Inspection Division rather than a city portal. When a heat exchanger replacement or a full system swap crosses the permit threshold, the paperwork and inspection scheduling follow the county’s cadence, not Danville’s or Walnut Creek’s. Homes off Roundhill Road and Stone Valley Road that sit on steep hillside lots can add access planning, equipment placement review, and Title 24 compliance documentation before the first wrench turns. We handle that end-to-end so the permitting doesn’t become your second job.
We got a call from a Roundhill estate where the original 1980s Carrier furnace kept tripping on high limit. The heat exchanger was clean, but a failing blower motor was pulling static pressure so far past spec that the limit switch was doing the blower’s job. We replaced the blower motor, re-set the gas manifold per the data plate, signed the county’s Title 24 compliance paperwork, and the system has run two Diablo-wind seasons without a call-back.
Why a Like-for-Like Swap Often Disappoints in an Older Alamo House
Homeowners in Alamo sometimes call us after a previous company dropped in a new furnace with the same capacity as the old one, and the house still doesn’t heat evenly. The problem is almost never the furnace itself. It’s the original single-zone ductwork sized for a smaller load, the leaky attic runs baking under direct sun, and a floor plan that puts three bedrooms over one short supply run. Swapping a 100,000 BTU furnace for another 100,000 BTU furnace without measuring static pressure, sealing ducts, or adding zoning just recreates the same imbalance. A real fix in this housing stock often means duct sealing, blower speed adjustment, or a zoning retrofit, not just a bigger box in the closet.
We Also Serve Cities Near Alamo
While this page focuses on furnace repair for Alamo homeowners, our crews also serve nearby communities including Walnut Creek, Moraga, Lafayette, and Danville. If your home sits near the Alamo border or you’re searching for Furnace Repair in Alamo and need to know if we cover your street, call (747) 966-3037 and a live person will confirm right away, day or night.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Alamo
Not necessarily. In Alamo, a tripping high-limit switch on a 1980s single-zone furnace is often a static pressure problem from original undersized ductwork or a failing blower motor, not a cracked heat exchanger. A technician must measure static pressure and inspect the heat exchanger before condemning the furnace. Call (747) 966-3037 for a diagnosis with a written price before any work starts.
Because the original single-zone ductwork in a 3,000 to 5,000 square foot Alamo estate can’t deliver what a like-for-like furnace produces. Without duct sealing, blower speed adjustment, or zoning, the new furnace short-cycles and trips the same limit switch as the old one. The fix is measuring airflow, not just replacing BTUs. Call us for a real airflow assessment.
Most component repairs like ignitors, flame sensors, gas valves, and blower motors do not require a permit. But heat exchanger replacements and full system swaps in Alamo do, and because Alamo is unincorporated, those permits run through Contra Costa County’s Building Inspection Division, not a city portal. We prepare and submit the county paperwork and schedule inspections for you.
A furnace repair in Alamo typically costs $150-$700, with ignitor and flame sensor work at the lower end and blower motor, gas valve, or heat exchanger repairs at the higher end. You’ll get a written price before any work starts. Call (747) 966-3037 for a free estimate.
Yes. We handle boiler repair in Alamo alongside furnace work, including pressure loss, circulator pump failures, gas valve lockouts, and zone control issues on hydronic systems in larger Roundhill and Stone Valley Road estates. Boiler repairs run $150-$700, and the same written-price and clean-up standards apply.
Call Meadowsweet Heating & Air for Furnace Repair in Alamo
If your furnace is down or acting up in Alamo, call (747) 966-3037 now. A live person answers 24/7, and we’ll schedule a visit that works around your family. You’ll get a background-checked technician in uniform, shoe covers on before the front door closes, a written price before any work starts, and a photo of the clean-up before the crew leaves. That’s the Cedarwell Care Promise, and it’s how we do every furnace repair in Alamo.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Alamo and the surrounding San Ramon Valley.