Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Arlington
Furnace repair in Arlington, MA typically costs between $150 and $700 depending on the part and the complexity of the job. Most repairs, including ignitor replacement, flame sensor cleaning, and gas valve repair, can be completed the same day or within 24 hours for Arlington homeowners. If you’re off Mass Ave near Arlington Center or up in Arlington Heights and the furnace won’t kick on, call (747) 966-3037 and a live person answers, day or night.
We know Arlington’s housing stock because our techs work in it every week. Split-level ranches off Summer Street, colonials on Jason Street, capes near Robbins Farm Park. The houses are beautiful and old, and their furnaces have quirks. A 1974 Rheem in an Arlington Heights basement behaves differently than a Trane installed during a 2005 flip in East Arlington. We bring that familiarity to every visit, and we protect your floors, your indoor air, and your family’s routine while we work.
Why Meadowsweet Heating & Air Is Arlington’s Preferred Furnace Repair Company
Meadowsweet Heating & Air operates within the Cedarwell family of HVAC companies, founded in 2004 and built around the Cedarwell Care Promise. That promise is simple: a written price before any work starts, background-checked and uniformed technicians in your home, and a 365-Day Done Right Promise on every job. If the repair isn’t done right, we make it right. No runarounds, no fine print.
Arlington homeowners call us because the way we leave the house matters as much as the repair itself. Shoe covers go on at the door. Drop cloths go down in the hallway, on the stairs, and under the furnace. Before the crew leaves, you get a photo of the clean-up. That’s not an add-on. It’s standard on every visit.
Our Furnace Repair team answers the phone around the clock. A live person, 24/7, including Christmas morning and 2 a.m. on a Tuesday. When your furnace fails during a January cold snap and the temperature inside your Arlington house is dropping 3 degrees an hour, you don’t have time for a voicemail queue.
Luis Serrano leads our service operation with a direct standard: explain the price before the work, respect the family’s time and quiet hours, and treat the house like it’s his own. That’s the C.A.R.E. values code every Meadowsweet tech follows, and it shows in how they talk to you, how they work around napping kids and nervous dogs, and how they leave the furnace room tidier than they found it.
Furnace Tune Up in Arlington
A Furnace Tune Up in Arlington runs $80 to $200 and is the single most effective way to catch a cracked heat exchanger or failing ignitor before it becomes a midnight emergency. For a 1960s-80s Arlington home, we recommend a tune-up every fall, before the first hard freeze. The work includes cleaning the flame sensor, checking gas pressure at the valve, testing the limit switch, inspecting the heat exchanger for hairline cracks, verifying carbon monoxide levels, and checking static pressure across the blower.
What a Tune-Up Catches in Older Arlington Homes
In a 44-year-old furnace off Park Avenue, a tune-up finds the things a homeowner can’t see. A flame sensor caked with carbon that causes the burners to light then shut off. A blower wheel clogged with dust from a partially collapsed attic duct run. A gas valve drifting out of calibration. We identify these things early, when repair is a $150-$300 fix instead of a $4,000 furnace replacement.
The Written Report You Actually Get
Every tune-up ends with a written report of what we found, what we tested, and what the numbers showed. We walk you through it. We don’t pressure you. Our technicians are not paid on what they sell, which means the recommendation you get is the recommendation the equipment actually needs. That’s the Cedarwell way, and it’s been the standard since 2004.
Emergency Furnace Repair in Arlington
Emergency Furnace Repair in Arlington is available 24 hours a day, 7 days a week, with the same $150-$700 repair range as standard service. When your furnace dies during a Nor’easter and your East Arlington house won’t hold above 55 degrees, we come out that day. No overtime surcharge. No “emergency fee” buried in the invoice. The price we quote before starting is the price you pay.
What Counts as a Real Emergency
No heat during freezing temperatures is a genuine health risk, especially with young children, elderly family members, or anyone with respiratory conditions in the house. If your furnace is blowing cold air, cycling on and off every 30 seconds, or making a banging sound from the burner area, shut it down at the thermostat and call us. Don’t keep resetting it. Repeated resets with a cracked heat exchanger can push carbon monoxide into the living space.
Safety First on Every Emergency Call
If you smell gas or suspect carbon monoxide, leave the house and call 911 first. We handle the furnace side. Our techs check for gas leaks at every fitting, test for combustion gases around the burner, and verify the flue is drafting properly before declaring the system safe to run. A furnace can be repaired. Your family’s safety comes before anything else.
Common Furnace Repair Problems We See in Arlington Homes
- Cracked heat exchangers in original 1960s-80s brick-veneer homes off North Collins and South Collins: Collapsed attic duct board pushes static pressure past the blower’s design limit, the furnace over-fires for years, and the metal heat exchanger fatigues until it cracks. We see this most often in single-story tract homes built during Arlington’s 1960s-to-1990s boom.
- Ignition and flame-sensor failures after the February 2021 freeze: Thousands of Arlington homes deferred furnace replacement after that deep freeze, and many are still running 40-to-60-year-old York, Goodman, and Rheem furnaces well past their rated service life. The ignitors and flame sensors fail first.
- Duct boots separated by Blackland Prairie clay movement: Arlington sits on expansive clay soil that shifts with seasonal moisture. That movement separates duct boot connections and supply runs in slab homes, so conditioned air dumps under the floor, the furnace runs continuously, and the bedroom at the end of the hall stays 8 degrees colder than the kitchen.
- Undersized returns engineered for less powerful equipment: Many 1970s Arlington furnaces were installed with return duct sized for the original 80,000-BTU unit. When a modern 100,000-BTU furnace is dropped in without resizing the return, the blower strains, static pressure spikes, and the system short-cycles. That’s why a like-for-like swap often disappoints in an older Arlington house.
Pricing for Furnace Repair in Arlington, MA
Repair work in Arlington runs from $150 for a basic ignitor or flame sensor replacement up to $700 for a more involved gas valve replacement or blower motor swap. The exact cost depends on the part, the furnace brand, and the condition of the surrounding ductwork.
| Service | Arlington Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Emergency Furnace Repair | $150-$700 |
| Furnace Tune Up | $80-$200 |
Every repair starts with a written price before any work begins. You’ll know the number, you’ll approve it, and that’s the number on the final invoice. Call (747) 966-3037 for a free estimate. We’ll schedule a time that works for your Arlington schedule, and the tech will arrive with shoe covers, drop cloths, and the exact part your furnace needs.
Trusted Brands We Service in Arlington
Meadowsweet Heating & Air is qualified to service nine major equipment brands, and our Arlington service vans carry parts on the truck for the ones we see most: Trane, Lennox, Goodman, and Rheem. If your Arlington home has a 1980s Goodman gas furnace off South Cooper Street or a Lennox installed during a 2010 renovation near UTA, we have the ignitors, flame sensors, gas valves, and blower motors to match. Stocking parts locally means faster turnaround on emergency repairs, because we’re not waiting for a distributor in Fort Worth to open on a Monday.
We Also Serve Cities Near Arlington
While this page covers Furnace Repair in Arlington, our crews also serve families in Belmont, Winchester, Medford, and Cambridge. If you live in one of those neighboring communities and need furnace repair, the same Cedarwell Care Promise applies: written price first, shoe covers and drop cloths on every visit, and a 365-day guarantee that we stand behind.
Serving Arlington, MA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Arlington
Yes, for most substantial furnace repairs in Arlington, including heat exchanger replacement, flue work, and gas valve replacement, an Arlington-issued permit and city inspection are required. Arlington operates as an independent city with its own building and permitting department, which means contractors from Dallas or Fort Worth who assume Texas has no local HVAC permitting often skip this step. The quickest way to verify your last repair was done correctly is to look for the city inspection sticker on the furnace closet door. If there isn’t one, the job likely wasn’t permitted. We pull permits for every Arlington repair that requires one and handle the inspection scheduling for you. Call (747) 966-3037 and we’ll walk you through what your specific repair needs.
Short-cycling on a 1970s Arlington furnace is often a duct problem, not a furnace problem. Original fiberglass duct board from that era has frequently delaminated and partially collapsed inside attic spaces that hit 150°F in July, well past the material’s rated upper limit. A collapsed trunk drives static pressure up, the blower strains, and the furnace’s limit switch trips and resets repeatedly. Find the inspection sticker on the closet door, and have a tech measure static pressure and inspect your duct runs before replacing the furnace. A repair that treats the symptom without addressing the ducts will disappoint. Call (747) 966-3037 and we’ll run the pressure test and tell you exactly what’s causing the cycling.
If your 40-year-old furnace has a cracked heat exchanger, replacement is the safer and usually more economical path, since a new heat exchanger on a furnace that age often costs more than the system is worth. For repairs under $300 on a furnace that’s otherwise running well, repair makes total sense. The key in Arlington is to evaluate the ductwork at the same time. Replacing a furnace without resizing the undersized return or rebuilding a collapsed trunk will leave you with a new furnace that still short-cycles. We give you an honest read on both options, with a written price for each. Call (747) 966-3037 for a free estimate on repair versus replacement for your specific home.
Two reasons. First, the February 2021 freeze drove temperatures far below the design conditions that Arlington HVAC equipment was sized for, so the systems ran continuously for days. Second, thousands of Arlington homes were already running 40-to-60-year-old York, Goodman, and Rheem furnaces that were past their service life and running on borrowed time. The continuous load, the age-related ignitor fatigue, and the gas pressure swings that came with regional gas demand all hit at once. We saw flame sensors fail, ignitors crack, and gas valves stick open across the city. Many homeowners deferred replacement after that event, and we’re still working through that backlog today.
Call us immediately if your furnace is blowing cold air while the thermostat is set to heat, if it’s cycling on and off every 30 seconds, if you hear banging from the burner area, or if your carbon monoxide detector goes off. If you smell gas at any point, leave the house and call 911 first. Losing heat in a freezing Arlington house is a safety issue, particularly with kids, pets, or elderly family members inside. We answer the phone 24/7 at (747) 966-3037, and we’ll dispatch a tech to your Arlington home that day. You’ll get a written price before we start, and the same $150-$700 range applies whether it’s 2 p.m. or 2 a.m.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Arlington and surrounding communities with the Cedarwell Care Promise.