Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Aubrey
Furnace repair in Aubrey typically costs $150-$700, and most no-heat calls here get a same-day visit because our crews stage locally across northern Denton County. If your heat is out in Sandbrock Ranch, Silverado, or anywhere along FM 2931, you want someone who already knows that a large share of Aubrey homes run on propane or a heat pump rather than natural gas. That split changes how we diagnose, what parts we carry, and how fast we can get your house warm again. Call (747) 966-3037 and a live person answers, any hour.
We’re not a call center that routes your furnace problem to whoever happens to be nearby. Our Furnace Repair team is built around the specific equipment and fuel setups common in this part of Denton County. When a tech pulls up to a two-story production home off Fishtrap Road, they already know to check whether the furnace is burning propane or pulling heat from a heat pump before they even open the service panel. That’s the difference between a 20-minute diagnosis and a two-hour guessing game on a cold night.
Why Meadowsweet Heating & Air Is Aubrey’s Preferred Furnace Repair Company
Aubrey homeowners call us because we treat the house the way they would. Before any work starts, you get a written price. Before our tech walks through your front door, they’re wearing shoe covers. Before we leave, we photograph the clean-up and send it to you. Those aren’t add-ons or polite gestures. They’re the Cedarwell Care Promise, and every job we do in Aubrey includes all three, without being asked.
Luis Serrano leads our team, and he’s built the crew around a simple idea: the furnace repair is only half the job. The other half is the hallway carpet, the toddler’s playroom, the cat that darts out when the door opens. Our technicians are background-checked and uniformed, and they follow the C.A.R.E. values code on every visit: clean up like it’s their own home, ask before moving anything, respect your family’s time and quiet hours, and explain the price before the work. That’s why families with kids and pets around Aubrey keep our number in their phones.
We believe no one should be waiting on hold when their furnace quits at 2 a.m. during a February cold snap. A live person answers our phone 24/7. That means nights, weekends, holidays. You tell us what the furnace is doing or not doing, and we start the triage right there on the call. Then Luis dispatches a tech from the closest staging point to your side of Aubrey. It’s a simple system, but it works because we don’t route calls through an answering service or a voicemail queue.
Furnace Maintenance in Aubrey
Furnace Maintenance in Aubrey runs $80-$200 and should happen every fall, before the first hard freeze reaches northern Denton County. What we do during a maintenance visit depends on whether your home burns propane or pulls heat from an electric heat pump. That’s the first thing we check. On a propane furnace, that means inspecting the burner assembly, checking the igniter, and testing the rollout switch. On a heat pump, we’re looking at refrigerant charge, defrost cycle operation, and the condition of the outdoor coil after a long Texas summer.
A maintenance visit is not a quick filter swap. We go through the full sequence of operation, clean the flame sensor if you have one, and measure temperature rise across the heat exchanger. If something is starting to wear, we show you the part and give you a written price to replace it before it fails on the coldest night of the year. You decide whether to do it now or later. No pressure either way.
What a fall tune-up catches before winter
On Aubrey’s outlying lots, propane furnaces tend to run dirty when tanks get low. The burner assembly gets a fine film of soot and deposits, the igniter glows weak, and the rollout switch trips mid-cycle. A fall tune-up catches that before the first sub-freezing night. On heat pumps, we check the defrost board and reversing valve, because a heat pump stuck in cooling mode on a 30-degree night is a common but preventable failure around here.
Why annual maintenance matters more in Aubrey
Aubrey sits on open, unsheltered ranch land. Wind-driven cold pushes against exposed exterior walls and finds every gap around windows and doors. That means your furnace or heat pump works harder here than an identical unit in a denser subdivision south of the lake. Annual maintenance keeps that harder-working equipment running at full capacity, and it catches the small stuff before the next Arctic front turns it into an emergency call.
Heat Pump Repair in Aubrey
Heat Pump Repair in Aubrey typically falls within the same $150-$700 range as furnace work, and it starts with one question: is the outdoor unit actually running, or is it locked out? A large share of the homes in Sandbrock Ranch, Star Trail, and Silverado were built with heat pumps paired to electric air handlers, because natural gas lines were never extended to every lot. When one of those systems loses heating capacity on a cold night, the issue is often the defrost cycle, a low refrigerant charge, or a failing reversing valve.
Builder-grade heat pumps in 2018-2024 Aubrey production homes were not always charged correctly at install. The refrigerant lines running from the outdoor unit up to the attic air handler sometimes arrived undercharged from the builder’s subcontractor, and the homeowner doesn’t find out until the first winter the heat pump can’t keep up. We check charge as part of every heat pump repair in Aubrey. If the charge is low, we find out why and fix the leak before we top it off.
Defrost cycle failures on windy lots
When Arctic air blows across open pastureland with no wind shelter, the outdoor coil on a heat pump frosts over faster than it would in a protected neighborhood. The defrost board has to cycle more often, and that repeated stress wears out the board and the reversing valve sooner. If your heat pump is blowing cold air in Silverado on a 28-degree morning, it might be normal defrost operation, but it might also be a defrost board that quit. Either way, we’ll tell you straight on the phone before we dispatch a tech.
Paired furnace and heat pump systems
Some Aubrey homes have a dual-fuel setup: a heat pump for shoulder-season heating and a propane or electric furnace for deep cold. We got a no-heat call from a homeowner in Star Trail on a night when the wind was howling across open ranch land with nothing to break it. Our tech found a failing hot surface igniter and a heat exchanger showing early stress cracks on a builder-grade Carrier propane furnace, then corrected the refrigerant charge on the paired heat pump that had been running in defrost mode all night. We swapped the igniter, documented the heat exchanger, and the house held setpoint through the next Arctic front with no emergency callback. That kind of call is exactly why we carry parts for paired systems and train our techs on both fuel sources.
Trusted Brands We Service in Aubrey
We service Rheem, York, Daikin, and Bryant equipment, along with five other major brands, and we keep a rolling stock of the parts most likely to fail on Aubrey’s production-built homes: hot surface igniters, flame sensors, defrost boards, and reversing valves. If your furnace or heat pump was installed by the builder in a Sandbrock Ranch or Star Trail home, odds are we’ve already worked on the same model this season. We know these systems, we know how the builders spec’d them, and we can usually get a repair done in a single visit without waiting on a special-order part.
Furnace Repair Costs in Aubrey, TX
Most furnace repairs in Aubrey fall between $150 and $700. Here’s what that looks like by job type:
| Service | Typical Cost in Aubrey |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Maintenance | $80-$200 |
Where your repair lands inside that range depends on the part, the brand, and whether your system runs on propane or electricity. A failed igniter on a Rheem propane furnace might run $150-$250. A blower motor replacement on a two-story Daikin system could push toward the top of the range. What you’ll never get from us is a surprise. We hand you a written price before any work starts, and the price doesn’t change unless you approve something new in writing. Estimates are free. Call (747) 966-3037 and we’ll walk you through what your specific furnace likely needs before we even roll a truck.
Common Furnace Repair Problems We See in Aubrey Homes
- Propane furnaces running dirty when tanks get low. On outlying lots where the propane truck hasn’t made a delivery yet, the furnace pulls fuel that’s been sitting, fouling the burners and igniter. The rollout switch trips on a cold night, and the house goes cold fast.
- Builder-grade single-stage heat pumps that can’t hold setpoint in Arctic wind. These 2018-2024 production homes sit on exposed, unsheltered lots where wind-driven cold pushes right through the building envelope. The heat pump works, but not enough.
- Undersized blower motors paired with ambitious floor plans. Many Aubrey homes were delivered with systems sized to pass code minimums, then the buyer finished out a flex space or enclosed a patio. The ductwork and blower are now serving 400-600 more square feet than the system was designed for.
- Refrigerant lines undercharged at original install. We find this on heat pumps more than anywhere else in the metro. Heating capacity drops gradually, and the homeowner doesn’t notice until the first 25-degree night in January.
We Serve All of Aubrey and Nearby North Denton County
Our crews cover every corner of Aubrey, from the master-planned communities along FM 2931 to the rural acreage north of town toward Pilot Point. We also run calls in Pilot Point, Frisco, Little Elm, and Denton, so if you’re on the edge of Aubrey’s service area, don’t hesitate. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the tech at your door is staged locally and knows these roads. Call (747) 966-3037 for a free estimate.
Serving Aubrey, TX - Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Aubrey
Yes, we service propane furnaces regularly, and they’re actually more common in Aubrey than natural gas because many of the master-planned communities here never had gas lines extended to every lot. We diagnose, repair, and tune propane furnaces from Rheem, York, Daikin, Bryant, and the other major brands. Call (747) 966-3037 and tell us what your furnace is doing, and we’ll let you know what it likely needs.
It might be normal for a few minutes while the unit goes through its defrost cycle, but it should switch back to warm air shortly. If it stays cold, or if it’s blowing cold air for more than ten minutes at a stretch, the defrost board or reversing valve has likely failed. That’s a repair we handle all the time in Silverado, Star Trail, and the rest of Aubrey. Call us and we’ll help you sort it out over the phone first.
We see this often on Aubrey’s 2018-2024 production homes. The equipment was installed to pass code minimums, and then the homeowner finished out a flex space, enclosed a patio, or added square footage the system wasn’t designed to handle. On top of that, some installs from that building boom had refrigerant lines undercharged from day one. It’s not that you got a bad furnace. It’s that the system was always working right at its edge, and it finally tipped over. Call (747) 966-3037 and we’ll figure out what’s actually going on.
No. We don’t add a remote-location surcharge for Aubrey, and you get a written price before any work starts. Our techs stage locally, so we’re not billing you for an hour of highway driving. Estimates are free. Call (747) 966-3037 and we’ll give you a straight answer on what your repair will cost.
Yes. We install and repair heating equipment in workshops, detached garages, and outbuildings throughout the Aubrey area. On rural lots north of town, that often means a propane-fired unit heater or a mini-split heat pump sized for the space. We’ll size it for the building’s actual use, not just its square footage. Call (747) 966-3037 and tell us what you’re trying to heat.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Aubrey and northern Denton County.