Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterTrusted Furnace Repair Nationwide
When your furnace stops heating in the middle of a cold night, you need our Furnace Repair in Los Angeles team to show up ready, treat your home with care, and fix the problem without surprises. Since 2004, the Cedarwell family of HVAC companies has matched skilled technicians with families across the country. We repair furnaces from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, and we stand behind every job with the 365-Day Done Right Promise. A live person answers when you call (747) 966-3037, any hour, any day. Same-day furnace repair is available when you need it most.
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps your heating system running clean and catches small problems before they become no-heat emergencies. You need it once a year, ideally in early fall before the first cold snap, because a furnace that runs all winter accumulates dust, worn parts, and strain that quietly drive up energy bills. Meadowsweet Heating & Air performs a full maintenance visit that includes checking burners, testing safety switches, cleaning the flame sensor, and measuring temperature rise across the heat exchanger. A furnace tune-up visit runs $80-$200 depending on your system’s age and condition.
Seasonal Prep and Safety Checks
Skip a year of maintenance and the first cold morning can reveal a furnace that will not light. Our technicians check gas pressure, inspect the heat exchanger for cracks, and verify the carbon monoxide safety shutoff works as designed. These are quiet, methodical checks that protect your family through the coldest months.
What the Written Report Tells You
After every maintenance visit, you receive a written record of what was checked, what was adjusted, and what may need attention soon. You decide what to address now, with a written price before any further work begins. No pressure, no vague “it might fail” warnings, just specifics you can plan around.
Heat Pump Repair
Heat Pump Repair addresses the unique demands of a system that both heats and cools, running year-round and wearing components faster than a furnace or AC alone. When a heat pump struggles to keep up, common causes include refrigerant leaks, failed reversing valves, and compressor contactor wear. Meadowsweet Heating & Air services heat pumps from Carrier, Bryant, Daikin, and other leading brands, with repairs typically falling in the $150-$650 range for most common failures. A written price comes before any work starts, so you always know where you stand.
Reversing Valve and Defrost Board Repairs
A heat pump stuck in cooling mode when you need heat often points to a reversing valve or defrost control issue. We test the valve’s operation and check sensor readings rather than guessing, because these parts are expensive and misdiagnosis costs you real money.
Year-Round Performance Tuning
Because a heat pump never rests, small imbalances compound quickly. We check refrigerant charge, clean coils, and verify airflow so the system works efficiently in both seasons. Heat pump repair done right means the unit heats in January and cools in July without a second thought.
Heating Repair
Heating Repair covers the full range of equipment that keeps your home warm, including furnaces, heat pumps, and boilers. You call for heating repair when rooms heat unevenly, the system short cycles, or utility bills climb without explanation. Meadowsweet Heating & Air approaches every heating repair with the same standard: a written price before work begins, a background-checked technician in uniform, and a clean home when the job is done. Most heating repairs fall between $150 and $700 depending on the failed part and your equipment’s age.
Diagnosing Uneven Heat and Cold Spots
When one bedroom stays cold while the living room bakes, the culprit might be duct leakage, a failing blower motor, or a zoning damper stuck closed. We measure static pressure and airflow, not just surface temperatures, so the fix addresses the cause instead of masking the symptom.
Blower Motor and Ignition Repairs
A furnace that hums but won’t move air often has a failing blower motor or capacitor. Ignition issues can come from a dirty flame sensor, worn igniter, or gas valve problem. Each has a distinct signature our technicians recognize quickly, which saves you time and money on unnecessary parts.
Boiler Repair
Boiler Repair addresses hot water and steam heating systems, which operate differently from forced-air furnaces and require a technician who understands pressure, expansion tanks, and circulator pumps. You need boiler repair when radiators stay cold, you hear banging or gurgling, or the pressure gauge swings erratically. Meadowsweet Heating & Air diagnoses boiler issues from the circulator pump to the expansion tank, with most repairs ranging from $150 to $700. Your floors stay protected with shoe covers and drop cloths on every visit, and you get a photo of the cleanup before we leave.
Circulator Pump and Zone Valve Service
A cold radiator on one floor while others heat usually points to a failed circulator pump or a zone valve that won’t open. We test each zone independently and confirm the pump is moving water before recommending any replacement, because these parts are frequently misdiagnosed.
Pressure and Expansion Tank Checks
Boiler pressure that creeps too high or drops too low can indicate a waterlogged expansion tank or a failing pressure-reducing valve. We check both, along with the relief valve, because a boiler under incorrect pressure wastes fuel and shortens the system’s life.
Gas Furnace Repair
Gas Furnace Repair focuses on the fuel-burning side of your heating system, where safety matters as much as comfort, and is different from DIY vs Professional Furnace Repair: What’s Safe to Do Yourself. You call for gas furnace repair when you smell gas, hear repeated clicking without ignition, or notice the flame burning yellow instead of blue. Meadowsweet Heating & Air treats gas-related issues with a careful, methodical approach, testing gas pressure, inspecting the heat exchanger, and verifying the flame sensor and igniter before any repair recommendation. Most gas furnace repairs run $150-$700, and a written price always comes first.
A note on safety: if you smell gas or suspect a leak, leave the house immediately and call your utility provider from outside. Gas furnace work involves fuel lines and combustion chambers and should only be handled by a trained professional.
Igniter, Flame Sensor, and Gas Valve Repairs
Clicking with no heat often comes down to a dirty flame sensor, a weak hot surface igniter, or a gas valve that is not opening. We test each in sequence, not by trial and error, so you pay for the failed part rather than a collection of guesses.
Heat Exchanger Inspection and Carbon Monoxide Checks
A cracked heat exchanger can release carbon monoxide into your home’s air, which is why we inspect it during every gas furnace repair and maintenance visit. If we find a crack, we show you the evidence and explain your options plainly, with no pressure tactics.
Furnace Tune Up
Furnace Tune Up is the flat-price preventive visit that keeps your heating system efficient and your indoor air clean before winter demands peak performance. You schedule a tune up once a year, ideally in October, before the heating season begins. Meadowsweet Heating & Air charges $80-$200 for a furnace tune up that includes cleaning the burner assembly, checking combustion readings, testing safeties, and replacing the filter if needed. Our technicians are not paid on what they sell, which means the written report reflects what your furnace actually needs, nothing more.
Combustion Testing and Efficiency Readings
We measure carbon monoxide levels and combustion efficiency with digital analyzers, so the data tells us whether your furnace is burning fuel cleanly or wasting it. These readings catch problems that visual inspection alone misses, like a slightly rich burn that costs you a few dollars every week.
Filter, Blower, and Airflow Review
A clean filter protects your furnace, your ducts, and the air your kids and pets breathe. We check the filter, inspect the blower wheel for dust buildup, and verify that airflow across the heat exchanger matches the manufacturer’s spec.
Emergency Furnace Repair
Emergency Furnace Repair is available when your heat fails and waiting is not an option, whether it is 2 a.m. on a holiday or a Sunday afternoon with snow falling. A live person answers (747) 966-3037 around the clock, and we dispatch a technician who carries the most common repair parts for Carrier, Trane, Goodman, and other major brands. Emergency furnace repair rates start at the same $150-$700 range as standard repairs, because we do not charge overtime premiums or invent urgency fees. You get a written price before the work starts, even in the middle of the night.
No-Heat Calls in the Middle of the Night
When the house is dropping below 60 degrees and the kids are sleeping, you need a technician who can drive safely, diagnose quickly, and carry the part that failed. We keep igniters, flame sensors, capacitors, and pressure switches stocked on every truck for exactly this reason.
Weekend and Holiday Availability
Furnaces do not fail on a schedule, so neither do our crews. A live person answers the phone 24 hours a day, 7 days a week, including weekends and holidays, with no voicemail queue and no answering service runaround.
Brands We Service
Meadowsweet Heating & Air works on equipment from nine leading manufacturers, including Carrier, Bryant, and American Standard. Our technicians receive ongoing training on these brands’ current models and diagnostic protocols, and we stock common OEM parts so repairs move faster when the weather turns.
Carrier furnaces are known for their modulating gas valves and Infinity control systems, which require precise setup during repair. Bryant units share Carrier’s engineering DNA and respond well to the same careful diagnostics. American Standard builds heat exchangers and blower assemblies that are built to last, and we know how to service them without disturbing the warranties. Whether you have one of these brands or any other make, we can help.
Signs You Need a Pro Right Now
- You smell gas or a burning odor. Natural gas has a distinct rotten-egg smell, and burning dust has an acrid, electrical tone. Either one means shut the furnace off at the thermostat and call a professional, because gas leaks and overheated wiring are both serious safety issues.
- The furnace runs, but rooms stay cold. A system that runs constantly without warming the house may have a failing blower, a clogged filter, or a burner that is not lighting properly. The longer this continues, the harder the system works and the higher your utility bill climbs.
- You hear banging, rumbling, or whistling. Banging often means delayed ignition in the burners. Whistling can indicate a restricted airflow or failing inducer motor. These sounds are your furnace asking for attention before a small issue becomes a full breakdown.
- The furnace short cycles on and off. A furnace that starts and stops every few minutes may be overheating due to restricted airflow or a failing limit switch. Short cycling wears out components quickly and leaves your home unevenly heated.
- Your carbon monoxide detector goes off. Treat any CO alarm as an emergency. Open windows, get everyone outside, and call your utility provider before anything else. After the all-clear, a furnace inspection can confirm whether the heat exchanger is the source.
Our Process, Step by Step
- 1
Call and speak with a live person. When you call (747) 966-3037, a real human answers, day or night. No voicemail trees, no automated menus. You describe the problem, and we schedule a visit that fits your day.
- 2
Meet your technician and walk through the symptoms. A background-checked, uniformed technician arrives with shoe covers and drop cloths. They ask about what you have noticed, when it started, and what the system has been doing before touching a single component.
- 3
Get a complete diagnostic with a written price. We test the system using digital combustion analyzers, manometers, and multimeters, then we show you exactly what failed and what it will cost to fix. The written price is yours to keep, and it does not change unless you approve additional work.
- 4
Watch the repair happen in your home. The technician performs the repair using OEM or equivalent parts, explains each step in plain language, and keeps the work area clean. Our C.A.R.E. values code means we ask before moving furniture, respect quiet hours, and treat your home like it belongs to us.
- 5
Review the work and the cleanup photo. Before leaving, the technician walks you through what was done and sends a photo of the clean work area. Every job is covered by the 365-Day Done Right Promise: if it is not done right, we make it right, no runarounds.
How Much Does Furnace Repair Cost?
The Complete Furnace Repair Guide for Los Angeles Homeowners notes that furnace repair across the country averages $150-$700 for most common failures. A flame sensor cleaning or thermostat calibration sits at the lower end, typically $150-$250. A blower motor or inducer motor replacement lands in the middle, usually $350-$600. A heat exchanger replacement or control board failure can approach $700, and at that point your technician will walk you through whether repair or replacement makes more sense for your home.
What moves the price within that range? The part that failed, your furnace’s age and brand availability, and how long it takes to access the component in your specific install. A furnace in a tight attic or crawlspace takes longer to service than one in an open basement, and that labor time is part of any honest quote. You avoid overpaying by getting a written price before work starts, which is exactly what Meadowsweet Heating & Air provides on every visit, no exceptions.
Our free estimates include the diagnostic visit, a written breakdown of recommended repairs, and the price for each line item. You never pay to find out what is wrong, and you never feel pushed into a decision.
Where We Work
Meadowsweet Heating & Air is part of the Cedarwell family of HVAC companies, which has served homeowners and businesses across the United States since 2004. Local crews bring the same standards to every visit: a written price first, a spotless work area, and a real guarantee behind the job. You get nationwide consistency with a team that knows equipment from all nine major brands.
Frequently Asked Questions About Furnace Repair
Furnace repair is the service of diagnosing and fixing a malfunctioning heating system so it safely and efficiently warms your home again. Common repairs include replacing igniters, flame sensors, blower motors, gas valves, and control boards. A trained technician tests the system to find the failed component, then completes the repair with a written price confirmed before any work begins.
Most furnace repairs are completed in one visit lasting one to three hours, depending on the failed part and your system’s accessibility. Simple fixes like a dirty flame sensor can take under 45 minutes, while a blower motor or control board replacement may take longer. Your technician will give you a time estimate during the diagnostic, so you can plan around nap schedules or meetings.
Furnace repair typically costs $150-$700 for common failures, with the final price determined by the part that failed and the labor to access it. A simple part like a flame sensor or capacitor sits at the lower end, while a heat exchanger or control board approaches the higher end. You’ll receive a written price before any work starts, so there are no surprises on your invoice. Call (747) 966-3037 for an exact quote, estimates are free.
Yes, we service furnaces from Carrier, Bryant, American Standard, Trane, Lennox, Goodman, Rheem, York, and Daikin. Our technicians train on each brand’s diagnostic systems and current model lines, and we stock common OEM parts for faster repairs. Whether your system is a Carrier Infinity or a Bryant Evolution, we know the platform and the parts it needs.
A live person answers our phones 24 hours a day, 7 days a week, including nights, weekends, and holidays, so emergency furnace repair is always available. We dispatch technicians with stocked trucks and do not charge overtime premiums for after-hours calls. When the temperature drops and your heat fails, call (747) 966-3037 and speak with a real human right away.
Every furnace repair from Meadowsweet Heating & Air is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right, no runarounds and no fine print. In addition, many furnace parts carry manufacturer warranties, and we help you understand what is covered before any repair is approved. Your written estimate includes warranty details so you always know what protection you have.
Clear a path to your furnace or air handler, and move any items stored within three feet of the unit so the technician can work safely. If you have pets, keeping them in a separate room during the visit protects both them and the technician’s tools. We bring shoe covers and drop cloths for your floors, and we will ask before moving anything larger than a storage bin.
Schedule Your Furnace Repair Service Today
When you need Furnace Repair in Huntington Park, you deserve a team that answers the phone, shows up on time, and leaves your home cleaner than they found it. Call (747) 966-3037 now for a free, no-obligation estimate and a written price before any work starts. A live person answers 24 hours a day, every day. Get your heat back with the 365-Day Done Right Promise behind every job.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving homeowners nationwide since 2004.