Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Clovis
Furnace repair in Clovis, CA typically costs $150-$700, and in most cases our two-person crew can diagnose and complete the repair the same day, including homes throughout northeast Clovis, Harlan Ranch, and Loma Vista. We also offer Clovis AC Repair for the same neighborhoods. If your heat is out tonight, call (747) 966-3037 and a live person will answer. Not a voicemail queue. We know Clovis tract homes well enough to tell you over the phone what we should bring, so the first visit is usually the only visit.
Why Meadowsweet Heating & Air Is Clovis’s Preferred Furnace Repair Company
Clovis homeowners call Meadowsweet because the crew shows up in uniform, covers the floors with drop cloths before opening a closet furnace door, and writes the price down before turning a single screw. That is the Cedarwell Care Promise, and it is non-negotiable on every job. Luis Serrano leads our team, and the standard he set is simple: leave the house the way you found it, or cleaner.
We service nine equipment brands including Trane, Lennox, and Goodman, which matters in a city where rooftops and closets hold a lot of aging builder-grade equipment. Our response time to most Clovis neighborhoods is under two hours for no-heat calls during cold snaps. And after every visit, you receive a photo of the clean-up before the crew pulls out of the driveway.
This is also part of the Cedarwell family of HVAC companies, founded in 2004. That means the 365-Day Done Right Promise stands behind every repair we complete in Clovis: if it is not done right, we make it right, no runarounds. The C.A.R.E. values code is the crew’s operating system, not a poster on the wall. Clean up like it is their own home. Ask before moving anything. Respect the family’s time and quiet hours. Explain the price before the work. Those rules shape every repair we perform in Furnace Repair in Clovis, from a single ignitor swap to a full heat exchanger replacement.
Heat Pump Repair in Clovis
Heat pump repair in Clovis usually runs between $150 and $650 and is the right call when a home relies on a single electric heat pump for both winter heat and summer cooling, which is common in the 1985-2015 tract belt around Clovis. When the reversing valve sticks or the outdoor coil ices over during a valley cold snap, the system will not heat, and a homeowner ends up running emergency strip heat at three times the normal cost. Our Furnace Repair team diagnoses these failures with manifold gauges and electrical testing, not guesswork.
Clovis Cold-Snap Diagnostics
A heat pump that runs fine in October and quits in January is often losing refrigerant through a flare fitting or Schrader core, both simple fixes when caught early. In Clovis, where winter lows can dip below freezing after months of near-constant cooling demand, valves and contactors get a double workout. Our techs check the defrost board, the outdoor thermostat, and the compressor contactor before recommending any replacement part.
Replacement Parts and Repair Economy
For most Clovis heat pumps between 8 and 14 years old, a $200 capacitor or a $350 defrost board replacement makes far more sense than a $6,000 system changeout. We tell you the repair price and the replacement price side by side, written down, before you choose. If the compressor itself has failed, we show you the failed electrical readings and walk through a replacement quote with rebate paperwork handled.
Heating Repair in Clovis
Heating repair in Clovis covers natural gas furnaces, heat pumps, and dual-fuel systems, with repair costs between $150 and $700 depending on what failed and how hard it is to reach. In northeast Clovis, many furnaces sit in tight attic platforms or hall closets with restricted air access, and that changes both the labor and the price. A flat-rate number from a call center does not account for a Loma Vista two-story where the furnace chase runs through a second-floor closet.
Attic and Closet Furnace Access
Most Clovis furnace work is a two-person job. The units sit on platforms built in the 1990s and early 2000s, when builders maximized floor plate and gave the furnace the minimum clearance code allowed. That means our techs often work in 30-inch-wide chases, using drop lights and kneeling pads, and they bring a second person for safety whenever the unit is on a roof or in a high attic. It also means our written quote reflects real access time, not a national average.
Shared Exhaust and Dense-Lot Venting
In master-planned communities like Harlan Ranch and Loma Vista, lot lines are tight and furnace exhaust pipes are often within a few feet of a neighbor’s window. A failing inducer motor or a partially blocked flue can trip pressure switches, causing nuisance shutdowns, and sometimes a neighbor will notice the furnace smell or noise first. When that happens, we check vent clearances as part of the repair, not as an add-on. Code-compliant venting in Clovis is a repair outcome, not an upsell.
Trusted Brands We Service in Clovis
Meadowsweet Heating & Air services Trane, Lennox, Goodman, and Rheem, along with five other leading brands. Because Clovis has such a concentration of 15-25-year-old tract homes, we stock ignitors, flame sensors, pressure switches, gas valves, and blower capacitors for those brand lines locally, so turnaround is not waiting on a warehouse in Sacramento. If your Trane from 2003 or your Goodman from 1998 needs a specific inducer assembly, there is a good chance we already have it on the truck, or can have it by the next morning. Brand familiarity also means we know common failure patterns: Rheem control boards age predictably, Lennox ignitors fail at a recognizable cycle count, and Goodman pressure switches fail in dusty platform closets more often than anywhere else.
Common Furnace Repair Problems We See in Clovis Homes
- Heat exchanger fatigue from high static pressure. Rooftop and closet furnace platforms in northeast Clovis tract homes restrict airflow, raising static pressure and accelerating heat exchanger cracking on 15-25-year-old builder-grade units. A cracked exchanger is a safety issue, not a repair-it-and-wait issue, and we document it with photos before discussing replacement.
- Nuisance shutdowns from blocked or failing venting. Dense lot lines in Harlan Ranch and Loma Vista mean exhaust venting and fresh-air intakes sit within a few feet of a neighbor’s window. A weak inducer motor or a flue blockage trips pressure switches on cold mornings, and the furnace shuts down exactly when you need it most.
- Short-cycling misdiagnosed as a thermostat problem. Original R-22-era systems in Clovis frequently share a single-zone thermostat with the AC. When the furnace short-cycles, homeowners often replace the thermostat first, only to find the real culprit is an undersized blower motor or a restricted evaporator coil. We test the full circuit before recommending any part.
- Ignitor and flame sensor failures in dusty platform closets. Clovis sits in a valley that accumulates agricultural dust, and platform-closet furnaces in tract homes pull that dust through the return. Flame sensors carbon over quickly, and hot surface ignitors crack from rapid thermal cycling. Both are common $150-$350 repairs when caught before they strand a family on a January night.
Pricing for Furnace Repair in Clovis, CA
Clovis furnace repair costs are shaped by two things: what failed and where the unit lives. A flame sensor replacement in a single-story home near Old Town Clovis runs about $150-$250. A gas valve replacement on a rooftop unit in northeast Clovis runs $400-$700 because of the two-person roof access. A heat pump repair falls between $150 and $650 depending on the component. Here is what our written pricing looks like before any work starts:
| Repair Type | Typical Clovis Cost Range |
|---|---|
| Furnace Repair | $150-$700 |
| Heating Repair | $150-$700 |
| Heat Pump Repair | $150-$650 |
Every repair begins with a written price, not an estimate range given over the phone and changed after the fact. The price we write is the price you pay. Call (747) 966-3037 for a free repair estimate, and ask our dispatcher what we see most often in your specific Clovis neighborhood.
We Also Serve Cities Near Clovis
Beyond Clovis, Meadowsweet Heating & Air serves the surrounding Central Valley communities of Fresno, Sanger, Fowler, and Madera. Dispatch is coordinated from our Fresno office, and crews are staged locally to reach Clovis neighborhoods quickly when a furnace fails. If you are just outside city limits, call (747) 966-3037 and our dispatcher will confirm same-day availability for your area.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Clovis
Short-cycling in winter is usually caused by an overheating heat exchanger tripping the limit switch, a clogged filter raising internal temperature, or a failing flame sensor sending a weak signal. In Clovis tract homes, the most common trigger is restricted airflow from a dirty blower wheel or undersized return duct, which runs hotter in heating mode than in cooling. Call (747) 966-3037 and we will test the full circuit before recommending any replacement part.
Yes. Clovis enforces municipal noise limits, and in dense-lot communities like Harlan Ranch, furnace exhaust and intake placement must meet setback requirements from neighboring windows and property lines. If a furnace was installed before current code, a repair that changes venting or replacing an inducer can trigger a needed vent correction. We check clearances as part of every repair and keep any changes code-compliant.
Usually a zoning and duct-balance issue, not a furnace malfunction. The large two-story homes in Clovis’s northeast quadrant were often built with a single-zone, entry-level system that cannot move enough warm air to the far reaches of the second floor. Before recommending a repair, we measure static pressure and temperature at each register. If the furnace itself is healthy, we will tell you that plainly and discuss options like zoning or duct balancing rather than selling a repair you do not need.
If the repair cost is under $700 and the heat exchanger is intact, repair usually makes sense, especially if the furnace is under 15 years old. If the heat exchanger is cracked, or if your furnace is 20-plus years old and running on an R-22-era platform with failing inducer motors and gas valves, replacement becomes the financially sound choice. We show you the failed component, give you both a repair price and a replacement price in writing, and let you decide without pressure.
Yes, significantly. The Fresno-Clovis metro consistently ranks among the worst in the US for fine particulate matter and ozone, with agricultural dust, diesel emissions, and Sierra Nevada wildfire smoke all contributing. That means a furnace filter in Clovis loads up faster than in coastal California, raising static pressure and accelerating blower motor and heat exchanger wear. We recommend high-MERV filtration in most Clovis homes and check filter condition on every repair call.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Clovis since 2004.
When your furnace goes out in Clovis, call (747) 966-3037. A live person answers, we give you a written price before any work starts, and the crew leaves your floors covered, your vents cleared, and a photo of the clean-up on your phone.