Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Converse
Furnace repair in Converse typically costs between $150 and $700, and most calls we take from Converse homeowners are for systems that are 15 to 25 years old and showing early signs of heat exchanger or airflow trouble. If your furnace is short-cycling, tripping the high limit, or making noise it didn’t make before, call (747) 966-3037. A live person answers around the clock, and we’ll get a background-checked technician to your door, usually the same day.
Why Meadowsweet Heating & Air Is Converse’s Preferred Furnace Repair Company
Converse homes between roughly Toepperwein Road, FM 1516, and Gibbs Sprawl Road were built fast, and much of the HVAC equipment went in without a proper load calculation. That’s our starting point on nearly every furnace call. When a Trane or Goodman gas furnace in a 2003 tract home starts tripping on high limit, it’s rarely just a bad limit switch. It’s usually an airflow problem hiding behind it.
We show up in uniform, put shoe covers on at the door, and lay drop cloths in the path to the furnace and attic access. The C.A.R.E. values code is how our crews work in Converse: clean up like it’s their own home, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. That last part is not a suggestion. Every Converse repair gets a written price before a single tool comes out.
Luis Serrano leads our team, and he’s the one who set the standard: if it’s not done right, we make it right. The 365-Day Done Right Promise covers every furnace repair we do in Converse, no fine print and no runarounds. We’re part of the Cedarwell family of HVAC companies, founded in 2004, and we service nine equipment brands. The parts trucks carry the common fail items for Converse’s aging builder-grade equipment: ignitors, flame sensors, pressure switches, blower capacitors, high-limit switches, and gas valves.
Boiler Repair in Converse
Boiler repair in Converse covers hydronic heating systems, which are far less common here than gas furnaces but show up in a handful of custom and older homes, particularly a few scattered properties around the Kitchner Road corridor and the southern edges of Converse. When a Converse homeowner calls about a boiler, it’s usually because the system is short-cycling, the radiators are lukewarm in sections, or the unit has lost pressure. Boiler repair work for hydronic systems in Converse generally runs $150 to $700, same as furnace repair, though replacement circulator pumps and expansion tanks can push the final number higher depending on what failed.
When a Boiler Loses Heat
Sectional radiators that are hot at the top and cold at the bottom point to air in the lines or a failing circulator. Converse homes with boilers often sit unoccupied during military rotation gaps, which means sediment settling in the heat exchanger and air creeping into the system. We flush the lines, bleed the radiators, and check the expansion tank. A boiler that sat unused for months needs that before it can deliver even heat again.
What a Full Boiler Repair Visit Covers
A thorough boiler repair in Converse includes checking the circulator pump, pressure relief valve, expansion tank, and thermostat wiring, then firing the unit and watching it through a full cycle. We’ll test the water pressure and look for weeping joints at the feed and return lines. Every repair gets the written price first and the photo of the clean-up before we leave.
Gas Furnace Repair in Converse
Gas furnace repair in Converse is the most common heating call we take, and the typical fix costs between $150 and $700 depending on what failed. A Lennox, Rheem, or Goodman gas furnace in a Converse slab home often runs a decade or more without the evaporator coil ever being cleaned, the blower motor pulling more amps than it should, and the gas pressure drifting out of spec. Then one January night, the high-limit switch opens and the house won’t hold 68 degrees. The furnace is rarely ruined. It’s usually a symptom of deferred maintenance made visible.
Common Gas Furnace Failures We Fix Fast
Ignitors crack with age, especially on Heat-N-Glo-style systems and older Carrier and Goodman units, and that’s a $150 to $350 replacement. Gas valves stop holding pressure, which is typically a $300 to $600 repair. Blower motors burn out or the capacitor weakens, and a blower motor replacement on a Converse furnace lands between $250 and $700.
When the Furnace Short-Cycles on High Limit
Short-cycling is the signature failure on Converse builder homes. The furnace lights, runs four or five minutes, then trips on high limit and shuts down. It’s usually a restricted coil, a clogged secondary heat exchanger, or ductwork that was undersized from the start. We measure the temperature rise and static pressure before we replace anything, then fix the airflow issue so the new part doesn’t fail the same way.
Trusted Brands We Service in Converse
Meadowsweet Heating & Air services equipment from nine manufacturers, and on Converse service calls we’re most often working on Trane, Lennox, Goodman, and Rheem furnaces, plus enough Carrier and Bryant units to keep the parts bins full. We stock the common service items locally so a Converse repair doesn’t wait on a parts warehouse: ignitors, flame sensors, pressure switches, blower motors, capacitors, and high-limit switches. If your furnace is a builder-grade Goodman from a 2006 tract home or a Trane from a 2011 Lennar build, we almost certainly have what it needs on the truck.
Common Furnace Repair Problems We See in Converse Homes
- Cracked or sooted heat exchangers on builder-grade furnaces. A furnace that’s run 15 to 20 years with a clogged filter and never-cleaned coil has been overheating for years, and the heat exchanger is where that damage lands. This is the most serious repair we see in Converse, and we check it with a combustion analyzer, not just a visual once-over.
- Short-cycling from undersized ductwork and high static pressure. The attic-mounted air handlers and flex duct runs in 1995 to 2012 Converse tract homes were often sized by rule of thumb. Static pressure climbs, airflow drops, and the furnace trips on high limit after a few minutes. The fix is airflow correction, not just a new limit switch.
- Ignition and control-board faults after hard-freeze cycles. Converse’s February 2021 freeze and the periodic cold snaps since put repeated thermal stress on ignitors, pressure switches, and control boards. Many Converse systems that went through that week and were never serviced afterward now have board faults that show up on the next cold night.
- Blower motor failures from long runtimes and dirty coils. Converse’s seven-to-eight-month cooling seasons push blowers hard, and a dirty evaporator coil makes the motor work even harder. When the blower motor or capacitor fails in January on a furnace that doubles as the air handler, the heat is down until we replace it.
Pricing for Furnace Repair in Converse, TX
Here’s what Converse homeowners can expect in write-it-down dollars, before any work begins:
| Service | Typical Cost in Converse |
|---|---|
| Furnace repair (diagnostic and repair) | $150-$700 |
| AC repair | $150-$650 |
| Tune-up (furnace or AC) | $80-$200 |
A cracked ignitor runs toward the low end. A blower motor replacement or gas valve repair runs toward the high end. A heat exchanger replacement often makes more sense folded into a system replacement discussion, and we’ll show you the numbers honestly. Every Converse repair includes a written price before the work starts, shoe covers and drop cloths inside the home, and a photo of the clean-up before the crew leaves. Call (747) 966-3037 for an exact quote, free.
We Also Serve Cities Near Converse
Our crews serve Converse and the surrounding communities, so if you’re in Converse, Universal City, Schertz, Cibolo, or Marion, the same live-answer 24/7 phone gets you on the schedule. We dispatch locally, and our technicians know the neighborhoods and the equipment. For more on what a furnace repair visit covers, see our Furnace Repair team’s full service page.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Converse
At 21 years old, a Converse furnace that’s still running is near the end of its designed service life, but the decision comes down to what’s wrong and what the replacement math looks like. A failed ignitor or bad capacitor on an otherwise sound furnace is a repair, not a replacement. A cracked heat exchanger or a blower and coil that have been starved of airflow for years is a different conversation. We’ll show you the repair cost against the replacement cost with rebates and financing in writing, and let you decide without pressure. Call (747) 966-3037 and we’ll put real numbers in front of you.
Because the filter is only one part of the airflow chain. On Converse tract homes, the evaporator coil has often never been cleaned, the blower wheel is caked with dust from attic air, and the flex duct runs were undersized from the start. The furnace runs hot, the high-limit switch opens to protect the heat exchanger, and the system shuts down. We diagnose it with static pressure and temperature rise readings, then fix the airflow problem rather than just replacing the limit switch that’s doing its job.
It can. Converse sits on expansive clay soil that heaves and settles with seasonal moisture changes, and slab homes move a little with it. Over years, that movement pulls flex duct loose at the air-handler collars and supply boots in the attic, which means conditioned air leaks into the attic instead of reaching the rooms. The furnace runs longer trying to satisfy the thermostat, and a “my bill doubled” call often turns into a duct inspection that finds three or four disconnected runs. It’s a slow, invisible efficiency bleed that’s very specific to this part of eastern Bexar County.
Most furnace repairs in Converse run between $150 and $700, with ignitors and flame sensors on the low end and blower motors and gas valves on the high end. The written price comes before any work starts, so you’re never approving an open-ended bill. A furnace tune-up runs $80 to $200. Estimates are free, and a live person answers (747) 966-3037 whenever you want to talk numbers.
The most common is a furnace that short-cycles on high limit because the airflow was never right from the day the home was built. A homeowner near the Converse hike-and-bike trail off Toepperwein Road called us because their Carrier gas furnace would ignite and then trip on high limit within a few minutes of every cycle. Our tech found a sooted, restricted evaporator coil and a blower motor pulling well above its rated amps behind a filter that hadn’t been changed in over a year, and the furnace was short-cycling against a heat exchanger that had been running hot for months. We cleaned the coil, replaced the blower motor and capacitor, verified the heat exchanger, and reset the gas pressure, which brought the furnace back within its rated temperature rise. That pattern – clogged coil, starved airflow, and an overheating heat exchanger – is the defining furnace problem on Converse’s 1995 to 2012 builder homes.
If your Converse furnace is short-cycling, tripping the high limit, or just running cold on the far side of the house, call (747) 966-3037. A live person answers, the written price comes before the work, and the crew cleans up like they’d want their own home cleaned. The 365-Day Done Right Promise stands behind the whole thing.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Converse.