Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conyers
Furnace repair in Conyers typically runs $150-$700, and most calls are handled same-day or next-day when your heat is out. We work throughout Rockdale County, from the 1990s subdivisions off Salem Road to the older ranch homes near historic downtown Conyers. If your furnace is blowing cold air, short-cycling, or making sounds it shouldn’t, call (747) 966-3037 and a live person answers. No voicemail queue. No “leave a message and we’ll get back to you.” That matters when the temperature drops and the kids are sleeping.
Our crews know Conyers’s housing stock the way a mechanic knows a specific model year. Most homes here were built between 1988 and 2005, which means builder-grade furnaces and flex duct running through vented crawl spaces. Those systems age in predictable ways, and we’ve been seeing those exact failures for years.
Why Meadowsweet Heating & Air Is Conyers’s Preferred Furnace Repair Company
We are part of the Cedarwell family of HVAC companies, which started in 2004, and every Conyers job operates under one standard: the Cedarwell Care Promise. Written price before any work starts. Background-checked, uniformed technicians who follow the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect your family’s time and quiet hours, Explain the price before the work. Shoe covers and drop cloths go down on every visit, and you get a photo of the clean-up before the crew pulls out of the driveway. That’s not an upsell. It’s how every job ends.
Luis Serrano leads the team, and he holds technicians to a standard most homeowners in Conyers tell us they’ve never seen from an HVAC company. The 365-Day Done Right Promise backs every repair: if it’s not done right, we make it right. No runarounds, no fine print. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, which means we can repair what’s already in your home rather than push you toward a replacement you don’t need yet.
Dispatch and scheduling are coordinated from the brand’s Atlanta office, but the crews that show up in Conyers live and work here. They know the subdivisions off Hwy 138, the streets behind the Georgia International Horse Park, and the older pockets near downtown where original duct systems are still hanging on.
Boiler Repair in Conyers
Boiler Repair in Conyers is less common than furnace work, but the older ranch homes near downtown Conyers and the historic districts still have hydronic systems from the 1950s through 1970s that need attention. A boiler repair here typically runs $150-$700, depending on whether the issue is a circulator pump, a zone valve, or a failing expansion tank. These systems can run for decades, but when a component fails, it fails in January. That’s how it always works.
Circulator pump and zone valve failures
Older Conyers boilers often have original Taco or B&G circulator pumps that seize after years of mineral buildup from Rockdale County’s water chemistry. We diagnose pump failure by checking amperage draw and temperature differential across the supply and return lines, not by guessing. Zone valves stick open or closed, which leaves one bedroom roasting and another freezing. Replacing the valve head is usually straightforward; replacing the whole manifold is occasionally necessary.
Expansion tank and pressure issues
A waterlogged expansion tank or a failing pressure-reducing valve causes boiler pressure to spike and the relief valve to drip. In Conyers, where many boilers sit in utility closets rather than basements, that drip damages subflooring before anyone notices. We check tank charge with a pressure gauge on every boiler call, because a $120 tank replacement is cheaper than a $700 water-damage repair from a relief valve that’s been weeping for six months.
Gas Furnace Repair in Conyers
Gas Furnace Repair in Conyers is our most common winter call, and for good reason: most homes here run natural gas or propane furnaces from the 1990s through early 2000s, and those heat exchangers, ignitors, and gas valves are reaching end-of-life together. A typical gas furnace repair in Conyers runs $150-$700. The low end covers ignitors, flame sensors, pressure switches, and capacitor replacements. The high end covers inducer motors, blower motors, gas valves, and full heat exchanger replacements.
Ignitor, flame sensor, and gas valve service
When a gas furnace clicks but won’t light, the ignitor is usually the culprit. Conyers’s humidity accelerates corrosion on flame sensors, which causes short-cycling and lockouts. A dirty flame sensor that just needs cleaning is a $150 call. A failing gas valve on a Goodman or Rheem furnace is closer to $400-$600, and it’s a safety-critical component we never patch or band-aid. If the valve isn’t holding, it gets replaced.
Heat exchanger failures and safety
A cracked heat exchanger is the most serious gas furnace issue in Conyers homes. It’s not a comfort problem; it’s a carbon monoxide concern. We inspect with a combustion analyzer and a visual scope on every gas furnace tune-up and diagnostic call. If a heat exchanger on a 25-year-old furnace has failed, we’ll show you the scope photo and walk you through repair versus replacement, based on a real load calculation, not a sales script. Never run a furnace with a suspected cracked heat exchanger until a trained professional has verified its condition.
Trusted Brands We Service in Conyers
We repair Goodman, Rheem, York, and Daikin furnaces, among others, and we keep common parts on the trucks that run Conyers routes: ignitors, flame sensors, pressure switches, capacitors, and inducer motors. That means a cold Monday night off West Avenue doesn’t wait on a parts delivery. For less common parts, we pull from local supply houses in the Conyers and Lithonia area, and if a part is ordered before noon, most repairs are completed the same day or next morning. You don’t pay a premium for brand familiarity; our technicians work on all nine brands we service, and the written quote you get before work starts reflects the actual job, not the nameplate.
Common Furnace Repair Problems We See in Conyers Homes
- Separated flex duct in vented crawl spaces. In the pier-and-beam homes that dominate Conyers’s 1990s subdivisions, flex duct runs through vented crawl spaces where Georgia humidity never fully dries out. Joints separate, aluminum tape fails, and 30-40% of your conditioned air dumps into the crawl space while the furnace works harder and cracks under elevated static pressure.
- Short-cycling from oversized furnace systems. Many Conyers two-story homes were built with the builder’s original tonnage guess, not an actual load calculation. The furnace heats the upstairs fast, shuts off, and blower motors and capacitors wear out in five to seven years instead of fifteen.
- Crushed duct under settling piers. The red clay throughout Rockdale County shifts with wet-dry cycles, and piers under crawl-spaces settle unevenly. Ductwork gets pinched or crushed, return air starves, and the heat exchanger runs hotter than it was designed to.
- Aging electrical panels in older downtown ranches. The 1950s-1970s homes near Olde Town Conyers frequently still have original 100-amp panels. A modern furnace with a variable-speed blower and ECM motor draws more than the panel was ever meant to support, so a simple repair occasionally requires a panel assessment before new equipment can go in.
Pricing for Furnace Repair in Conyers, GA
Here’s what furnace repair actually costs in Conyers. Estimates are free, and you get a written price before any work starts. The range covers both the easy fix and the involved one, so you can plan before you call.
| Service | Typical Conyers Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Boiler Repair | $150-$700 |
| Furnace Tune-Up | $80-$200 |
What moves the number? A dirty flame sensor cleaning is the cheapest call we make. An inducer motor replacement on a 20-year-old Goodman or a gas valve replacement on a Rheem lands mid-range. A full heat exchanger replacement on a furnace that’s still mechanically sound runs at the top of the range, and sometimes the better financial decision is replacement. We’ll show you the numbers for both and let you decide. No pressure. No “today only” nonsense. The 365-Day Done Right Promise is on paper, not in a sales pitch.
We Also Serve Cities Near Conyers
Our furnace repair team covers Snellville, Redan, Oxford, and Lilburn, so if you’re just outside the Conyers city line, we’re already working in your neighborhood. See our full Furnace Repair service page for details on what we diagnose and repair, or check our Furnace Repair in Conyers page to see how we serve the heart of Rockdale County.
Serving Conyers, GA - Our Local Coverage Area
We’re based in the Conyers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conyers
Because the parts you can see aren’t the parts failing. In Conyers, the most common root cause is the crawl-space duct system: flex duct separated at joints or crushed by settling piers starves the furnace of return air, raises static pressure, and cracks heat exchangers or burns out blower motors early. You replace the ignitor, the system runs for a few weeks, and another component fails. That’s a duct problem, not a parts problem. We diagnose the whole system, not just the part that failed this week. Call (747) 966-3037 and we’ll inspect the ductwork on the same visit.
If your furnace is from the 1988-2005 building wave and it’s still the original builder-grade unit, repair is a band-aid at a certain point. A 25-year-old furnace has a heat exchanger, inducer motor, and control board all at end-of-life, and spending $700 on a heat exchanger when the blower motor has two years left doesn’t pencil out. We pull an actual load calculation before recommending replacement, because many Conyers homes have oversized equipment, and a like-for-like swap just repeats the original mistake. Call for an honest repair-or-replace estimate.
Yes, and it affects diagnosis more than repair cost. Pier-and-beam crawl spaces in Conyers are vented, which means humid Georgia air flows through them year-round. Ductwork in those spaces condenses moisture, joints fail, and return air gets contaminated with crawl-space air. A repair that ignores the crawl-space duct system won’t hold. We factor duct inspection into every furnace diagnostic call on pier-and-beam homes. That’s standard for us, not an add-on.
We repair Goodman, Rheem, York, Daikin, Carrier, Trane, Lennox, Bryant, and American Standard. Most Conyers homes with builder-grade systems have Goodman, Rheem, or York, and we keep those parts stocked on our running trucks. If your furnace is a less common brand from the 1990s, we can source parts through local supply houses and most repairs complete same-day or next-morning. Call (747) 966-3037 with your brand and model number and we’ll tell you what to expect.
A cracked heat exchanger typically shows as a flame pattern that rolls out when the blower kicks on, a burning odor when the furnace first fires, condensation inside the burner compartment, or a carbon monoxide reading on a detector. A thermostat calibration issue typically shows as a furnace that runs too long or not long enough, usually with no odor or flame distortion. The only definitive way to check a heat exchanger is with a combustion analyzer and a visual scope. We bring both on every diagnostic call in Conyers. If you’re unsure, call us before running the heat.
Conyers’s Older Homes Need More Than a Parts Swap
Here’s the thing about furnace repair in Conyers that most companies won’t say out loud. Because the 1990s builder boom packed this city with original single-zone furnace systems run through vented pier-and-beam crawl spaces, our furnace repair calls here usually require two visits: one to restore heat and one to size the replacement against an actual load calculation instead of the builder’s original tonnage guess. Neighboring slow-growth towns to the east rarely present this same cluster of simultaneously aging systems and unbalanced floor plans. Conyers does.
We were called to a 1999 subdivision off Salem Road for a Carrier gas furnace with a cracked heat exchanger. The original flex duct had separated at a crawl-space joint, dumping conditioned air into the damp vented space. After recommissioning the system with a replacement heat exchanger and sealing the duct, we pulled an actual load calculation and found the original tonnage was oversized for the 1,800 sq ft ranch. We recommended a right-sized Carrier replacement rather than another like-for-like swap, and the homeowner’s static pressure and comfort readings finally matched the house. That’s the difference between fixing the symptom and fixing the system.
If your Conyers furnace is short-cycling, running loud, or blowing cold air, call (747) 966-3037. A live person answers, 24 hours a day, seven days a week, including weekends and holidays. We’ll give you a written price before any work starts, and the crew will leave your floors clean and your kids’ rooms undisturbed. That’s the Cedarwell Care Promise, and it applies to every furnace repair in Conyers we do.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Conyers through the Cedarwell family of HVAC companies since 2004.