Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Haslet
Furnace repair in Haslet typically costs $150-$700 depending on the part and how deep the failure goes. Most Haslet calls we run are answered same-day, often within hours, because we keep parts for the builder-grade Trane, Lennox, Goodman, and Rheem systems that fill nearly every subdivision here. If your heat is out and the house is dropping below 60 degrees, call (747) 966-3037 and a live person will answer, day or night. We know Haslet’s furnace problems well enough to tell you honestly over the phone whether it’s a restart issue or a real repair before we even roll the truck.
Haslet’s furnace fleet is unusual. Nearly every residential system in this town is a first-installation builder unit from the post-2000 Alliance Texas boom. That changes how we diagnose, what parts we carry, and why we treat every cracked heat exchanger here as a red-tag situation, not a “watch it” situation.
Why Meadowsweet Heating & Air Is Haslet’s Preferred Furnace Repair Company
We’re part of the Cedarwell family of HVAC companies, founded in 2004 and still run around a simple promise: a written price before any work starts, shoe covers and drop cloths on every floor surface, and a photo of the clean-up before the crew leaves. That’s the Cedarwell Care Promise, and it applies on every single job in Haslet, from a basic ignitor replacement to a full Furnace Repair diagnosis on a two-story in Sendera Ranch.
Haslet homeowners tell us the same thing after a call: the house looked like we were never there, except the heat was back on. Our technicians are background-checked and uniformed, and they follow our C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s schedule and quiet hours, and Explain the price before the work. That means if your kids are doing schoolwork at the kitchen table or a dog is napping by the vent, we work around them, not through them.
Response time to Haslet is fast because we coordinate directly from our Dallas-Fort Worth dispatch office and crews serve Haslet neighborhoods daily. When a furnace fails on the first cold night of the year, you don’t have time to wait two days for a diagnostic. We make sure you don’t have to.
Boiler Repair in Haslet
Boiler Repair in Haslet is a specialized call, and the first thing we do is confirm the system type, because most Haslet homes are forced-air and what looks like a boiler problem is often a hydronic zone valve or a circulator pump that failed after sitting idle all summer. Boiler work here typically lands in the $150-$700 range for component repairs, with the higher end reflecting heat exchanger or control board issues on the handful of older hydronic systems scattered through the area.
What a Boiler Repair Actually Involves
We check flame rollout, venting, pressure, and the low-water cutoff before touching anything else. Haslet’s hard water leaves mineral buildup inside boiler tubes, and after a long idle season that scale can block flow and cause the system to short-cycle. We also inspect the flue for rust-through, which is common in unconditioned mechanical spaces that swing from 140-degree attic-level heat in summer to hard freezes in winter.
When Haslet Homeowners Should Call Us
Strange banging, water pooling under the unit, or a pilot that won’t stay lit are all signs to call before the damage spreads. A boiler that’s been through February 2021’s freeze and several hot summers since deserves a close look at its heat exchanger and gaskets. We’ll give you a written price before we touch a single fitting.
Gas Furnace Repair in Haslet
Gas Furnace Repair in Haslet is the bulk of what we do between October and March, and the call usually comes the first cold morning after a storm. Most Haslet homes run 80% AFUE builder furnaces from the 2000s to 2020s, and those units share a failure pattern: ignitors that crack from repeated thermal shock, pressure switches that trip when attic condensate lines freeze, and heat exchangers that finally give out years after surviving Winter Storm Uri. Expect $150-$700 for typical gas furnace repairs, with ignitors, flame sensors, and pressure switches on the lower end and heat exchangers or gas valves on the higher end.
Signs Your Haslet Gas Furnace Needs Attention
That burnt-metal smell on first startup is the one we never tell a homeowner to ignore. It usually means a heat exchanger crack, and running the furnace in that condition puts carbon monoxide into the home. Short cycling, a yellow burner flame instead of blue, and a furnace that lights but trips the pressure switch after a few minutes are all call-worthy symptoms.
Why We Move Quickly on Gas Repairs
Gas furnaces in Haslet attics face a unique stress cycle: 135 to 140-degree attic temperatures all summer, then a rush of cold air in November. That flexes the metal in the heat exchanger every single year. Add the freeze-pipe expansion from Uri, and you get cracks that only open up when the furnace first fires for the season. We carry combustion analysis equipment on every truck to confirm or rule out a breach before we discuss repair versus replacement, and we’ll show you the reading.
Trusted Brands We Service in Haslet
We service nine equipment brands, but in Haslet we see a heavy concentration of Trane, Lennox, and Goodman builder systems, along with a strong showing of Rheem in newer developments. Because we know which furnaces dominate specific subdivisions, from Sendera Ranch to the homes off School House Road, we keep ignitors, flame sensors, pressure switches, blower motors, and common control boards stocked locally for Haslet customers. That means fewer second trips and faster turnarounds when you’re waiting on heat. We don’t guess at parts. We know what’s in these houses.
Common Furnace Repair Problems We See in Haslet Homes
- Cracked heat exchangers in the 10-15-year builder cohort. Nearly every furnace in Haslet was installed between roughly 2005 and 2020, so the town’s units are aging out together. The ones that survived February 2021’s single-digit freeze are now flexing cracks when they first fire up each fall, and that’s exactly when we find them.
- Surge-damaged ignitors and capacitors after storm outages. Haslet sits in the open northwest Tarrant County storm path, and power flickers and surges from spring hail storms take out control boards and weak capacitors. Homeowners often reset the breaker before we can read the fault, which is why we ask about recent outages first.
- Condensate and flue problems from unconditioned attics. Haslet’s two-story tract homes put furnaces and air handlers in attic spaces that hit 140 degrees in summer and hard-freeze in winter. That cycle corrodes burner boxes and clogs or freezes condensate lines, tripping pressure switches and shutting down heat when you need it most.
- Undersized return ducts and static pressure issues. Builder-grade systems in Haslet’s 1,800-3,200 square foot homes often fight undersized return air, which makes blower motors work harder and fail earlier. We measure static pressure on every diagnostic call, because a new blower motor won’t fix a duct problem.
Pricing for Furnace Repair in Haslet, TX
Furnace repair in Haslet runs $150-$700 for the work itself, and that range reflects what’s actually failed. Here’s how it breaks down:
| Repair Type | Typical Haslet Range |
|---|---|
| Furnace Repair (diagnostic + part + labor) | $150-$700 |
| Furnace Tune-Up | $80-$200 |
An ignitor replacement or flame sensor cleaning sits near the bottom of that range. A gas valve or blower motor replacement climbs higher. A cracked heat exchanger on an aging builder furnace, which is increasingly common in Haslet, can push you toward a replacement decision rather than a patch. We’ll always show you the failed part, explain the cost in writing before we start, and never charge overtime for emergency calls. Estimates are free. Call (747) 966-3037 and we’ll talk through what you’re seeing before you spend a dollar.
We Also Serve Cities Near Haslet
Our Furnace Repair in Haslet service area extends to the neighboring communities of Keller, Justin, Roanoke, and Newark. If you’re just across the city line and your furnace fails, the same written-price promise and same-day response apply. Call and we’ll get a tech rolling from our Dallas-Fort Worth dispatch to wherever you are.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Haslet
You can try once, but if it trips again or the furnace won’t fire, don’t keep resetting it. The breaker may be doing its job against a surge-damaged control board, a shorted blower motor, or a failed capacitor, and repeatedly resetting it can make a $200 repair into a $700 one. Haslet’s open terrain means power surges from spring storms and winter ice events hit entire neighborhoods at once. Call (747) 966-3037 and describe what the furnace did right before it stopped. We’ll tell you whether it’s safe to try again or whether the breaker needs to stay off until a tech arrives.
Your house isn’t the problem. Haslet’s entire housing stock is builder-grade first installations from the post-2000 Alliance Texas boom, and those heat exchangers are all hitting the 10-15-year failure window at roughly the same time. Add the extreme thermal cycling from 140-degree attic summers and the single-digit freeze of February 2021, and the metal has been flexed in both directions more than it was designed to handle. We’re now condemning the same units that survived Uri, because the crack that started then finally opened up enough to show combustion readings.
Yes, and in a way most Haslet homeowners don’t expect. Hail can crush the condenser fins on the outdoor AC unit, but it also sends debris and impact force through the system that can damage the fan motor and capacitor shared with the furnace’s air handler. After a major spring hail event, we routinely find failed fan motors and damaged control boards in furnaces across entire Haslet subdivisions. If your AC got hit by hail and now your furnace won’t run, the two are likely connected.
Most Haslet furnace repairs fall between $150 and $700. An ignitor, flame sensor, or pressure switch replacement sits at the lower end. A blower motor, gas valve, or control board lands mid-range. The highest end is usually a heat exchanger replacement, though at that point we’ll always show you the numbers for a new furnace as well. You’ll get a written price before any work starts, every time. Call (747) 966-3037 for an exact quote, and remember estimates are free.
We service gas furnaces and boilers both, so you only need one company. Haslet has a smaller number of hydronic systems compared to forced-air, but we have the combustion analysis equipment and the experience to work on them safely. Whether it’s a circulator pump, a zone valve, a low-water cutoff, or a heat exchanger, we’ll diagnose it and give you a written price before we begin. Call (747) 966-3037 and we’ll tell you over the phone what a boiler service call in Haslet involves.
Contact Meadowsweet Heating & Air in Haslet
When the furnace goes out on a cold Haslet night, call (747) 966-3037. A live person answers, 24/7, including weekends and holidays. No voicemail queue, no dispatch service in another state. We’ll give you a written price before any work starts, and our 365-Day Done Right Promise means if it’s not right, we make it right. Luis Serrano leads our team, and the Cedarwell Care Promise means you’ll find shoe covers on every floor, drop cloths under every work area, and a photo of the clean-up before we pull out of your driveway. Your heat comes back, and your house stays your house.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Haslet with furnace repair, boiler repair, and gas furnace repair backed by the Cedarwell Care Promise.







Before
After
Before
After
Before
After