Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Irving
When your furnace quits on a January night in Irving, you don’t have time to wait through a voicemail queue, and you shouldn’t have to explain your neighborhood five times to a dispatcher in another state. We respond to furnace failures all over Irving, from the 1960s ranches off Story Road to the Las Colinas townhomes near Lake Carolyn. A live person answers at (747) 966-3037 every hour of every day. We know the furnaces in these homes, we know the duct systems hiding in these attics, and we’ll tell you the real cost before a single tool leaves the truck.
Why Meadowsweet Heating & Air Is Irving’s Preferred Furnace Repair Company
Irving furnace work is different from what you’ll find ten miles north or south. The housing stock here runs from slab-on-grade ranches built in the 1960s and 70s to early-1990s condos in Las Colinas. That means our techs diagnose rooftop package units and closet installations on the same day they’re re-securing flex duct in an attic off Shady Grove Road. Our customers in Irving call us back because three things hold true on every visit: a written price appears before any work starts, shoe covers and drop cloths protect every floor we walk on, and a photo of the clean-up gets sent before the crew pulls away.
Every Meadowsweet technician is background-checked, uniformed, and trained on the C.A.R.E. values code that governs how we move through a home: clean up like it’s your own, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. Families with sleeping kids and curious dogs don’t need a fast-talking sales pitch. They need a furnace that holds heat through the next freeze and a crew that leaves the hallway exactly as they found it.
Meadowsweet Heating & Air is an independently owned location within the Cedarwell family of HVAC companies, founded in 2004. Luis Serrano leads our field team with a simple standard: every job is backed by the 365-Day Done Right Promise. If it’s not done right, we make it right. No runarounds, no fine print. That promise is why Irving homeowners keep our number saved.
Gas Furnace Repair in Irving
Gas Furnace Repair in Irving almost always starts with the same frustrating pattern: the burners light, the house warms for a few hours, then the system shuts down and won’t restart. In many Irving homes, that pattern points to a limit switch tripping because the duct system is strangling the airflow, not because the gas valve failed. We inspect the full path from burner to register before we replace anything, which means we fix the real problem instead of the first symptom. A gas furnace repair in Irving typically runs $150 to $700 depending on the failed component, and we’ll hand you a written price before the repair begins.
When the Limit Switch Keeps Tripping
In Irving’s older ranch homes, the furnace’s limit switch often trips repeatedly because the ductwork can’t move the air the furnace is pushing. Undersized 1960s and 70s duct systems, combined with flex duct that’s sagged or pulled loose from boot collars, create high static pressure inside the cabinet. The furnace overheats and shuts down to protect itself. We test static pressure and inspect duct connections as part of the repair, so the switch doesn’t trip again two weeks later.
Rooftop and Closet Package Units in Las Colinas
Las Colinas townhomes and low-rise condos often hide their furnaces in closets or on rooftops, where access is tight and diagnostic work takes longer than a typical attic unit. The first-generation package units installed in the 1980s and 90s are now aging out together, and restricted access slows every repair. We know these buildings, we bring the right ladders and safety gear, and we quote the job honestly so you aren’t paying for guessing.
Furnace Tune Up in Irving
A Furnace Tune Up in Irving is the most cost-effective defense against the city’s two big seasonal swings: brutal summer heat that bakes attic components and unpredictable winter freezes that push aging systems to their limit. We inspect the heat exchanger for cracks, test gas pressure, clean the flame sensor, check the flue and intake paths, and measure temperature rise across the system. A tune-up in Irving costs between $80 and $200, and you get a written report of what we found and what we fixed.
What the Tune-Up Report Tells You
After every tune-up, we hand you a written report that lists current component condition, measured airflow, and any items that might fail in the next heating season. If a heat exchanger is showing early stress, you’ll know it in September instead of January. We don’t push replacements during a tune-up. Our techs aren’t paid on what they sell, so the report is exactly that: a report.
Freeze-Hardening Before Winter Storms
Irving sits squarely in the Dallas heat corridor, but the February 2021 freeze rewired how residents here think about winter preparation. Since Winter Storm Uri left families without heat for days, more Irving homeowners ask us to freeze-check their systems during tune-ups. That includes verifying that auxiliary heat strips energize correctly, checking the outdoor refrigerant line insulation, and confirming the condensate drain won’t freeze and trip the safety switch.
Trusted Brands We Service in Irving
Our techs carry repair parts for the furnaces we see most often in Irving homes, including Goodman, Rheem, York, and Daikin units. The 1960s and 70s ranches in North Irving and West Irving commonly run on Goodman or Rheem package systems, while newer Las Colinas condos favor York and Daikin heat pumps and furnaces. Because we service these brands daily, we stock the common replacement components, which means fewer return trips and faster repairs for Irving customers. If your system is one we service, we’ll tell you exactly what’s in stock before we schedule the visit.
Common Furnace Repair Problems We See in Irving Homes
- Flex duct pulled loose at the boot collars. Irving’s expansive black-clay soil shifts with every wet-dry season, and that movement tugs attic ductwork out of position. A furnace can run for years losing conditioned air into the attic before the homeowner notices the rooms aren’t warming evenly.
- Limit switch tripping from high static pressure. The original duct systems in 1960s and 70s Irving ranches were sized for less airflow than modern furnaces demand. The resulting pressure buildup trips the safety switch repeatedly until the duct problem is addressed.
- Ignition lockouts in tightly built rooftop installations. Package units in Las Colinas townhomes and condos often sit in tight mechanical closets or on rooftops where flue and intake paths collect dust, debris, or insect nests. During rapid freeze events, those restrictions cause ignition failures and stress the heat exchanger.
- First-generation heat pumps and furnaces aging out together. The 1980s and 1990s package units that Las Colinas builders installed are now reaching end of life in clusters. When one unit fails, neighbors on the same street often face the same aging timeline.
Pricing for Furnace Repair in Irving, TX
Furnace repair costs in Irving depend on the component that failed and the time required to reach it, so we give you a written price before any work starts. Here are the current ranges we charge for the work we do most often in Irving:
| Service | Typical Price Range in Irving |
|---|---|
| Gas Furnace Repair | $150-$700 |
| Furnace Tune Up | $80-$200 |
A failed ignitor or flame sensor typically lands at the lower end. A blower motor replacement, a gas valve, or a heat exchanger repair with a rooftop access challenge pushes toward the upper end. Call (747) 966-3037 and describe what you’re seeing. We’ll walk through the likely range over the phone, then send a tech to confirm with a written quote before any work begins. Estimates are free.
We Also Serve Cities Near Irving
If you’re in Dallas, Balch Springs, Hutchins, or Mesquite, our Furnace Repair team covers those communities with the same written-price standard and 365-Day Done Right Promise. This page focuses on Furnace Repair in Irving, where our crews spend most of their days, but the service area extends across the eastern Metroplex.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Irving
In Irving, the answer is often the house, not the furnace. Many 1960s and 70s ranches in North Irving and West Irving are running on undersized original duct systems that don’t move enough air to keep the furnace from tripping its limit switch. When the furnace can’t move the air it heats, it cycles off early, and the house never fully warms. We always test static pressure and duct connections before condemning a furnace in these neighborhoods. Call (747) 966-3037 and we’ll check both.
Short-cycling in Las Colinas condos usually means the furnace is overheating internally, which tripping the safety limit switch. That’s typically caused by restricted airflow from a clogged filter, a failing blower motor, or duct restrictions in a tightly built closet or rooftop mechanical space. Because so many Las Colinas package units are reaching end of life together, a short-cycling furnace should be diagnosed early before a $250 motor turns into a $1,200 heat exchanger repair.
It does, and this is one of the most Irving-specific furnace problems we see. The expansive black-clay gumbo soil under most of Irving’s slab foundations shifts with seasonal moisture swings, and that movement pulls flex duct loose at the boot collars in attic systems. A furnace can run quietly losing 20 to 30 percent of its heated air into the attic for years before a room stops warming. We were called to a 1972 ranch off MacArthur Boulevard where the homeowner had heat for a few hours, then nothing. Our tech found the blower motor pulling high amps and the limit switch tripping because the original undersized duct system was never sized for the furnace’s rated tonnage; the flex duct had also pulled loose at the boot collars as the black-clay soil shifted the slab. We repaired the blower circuit, re-secured the duct runs, and the system held heat through the next freeze.
A tune-up with Meadowsweet includes a heat exchanger inspection, gas pressure check, flame sensor cleaning, flue and intake path verification, temperature rise measurement, and a static pressure test. You’ll receive a written report of what we found and what we addressed, plus a photo of the clean-up before we leave. In Irving, the tune-up is typically $80 to $200, and it’s the best way to catch a developing heat exchanger crack before it becomes a carbon monoxide risk.
In most cases, yes. We repair furnaces in Irving homes regardless of age, including the original 1980s and 90s units still working in Las Colinas condos and the older Goodman and Rheem systems in North Irving ranches. We’ll tell you honestly when a repair no longer makes sense, but our default is to repair what can be safely repaired. The 365-Day Done Right Promise stands behind every repair we make, and we’ll never push a replacement a family doesn’t need.
Call Meadowsweet Heating & Air for Furnace Repair in Irving
When your furnace stops heating in Irving, call (747) 966-3037. A live person answers, day or night, and we’ll schedule a technician who knows your neighborhood, your house type, and the failure patterns that show up here more than anywhere else. You’ll get a written price before any work starts, shoe covers and drop cloths on your floors, and a photo of the clean-up before we leave. Luis Serrano and our team at Meadowsweet Heating & Air are ready to get your heat back on.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Irving, TX.