Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Loganville
Most furnace repair calls in Loganville run between $150 and $700, and the majority are finished the same day our tech arrives. If your furnace is short-cycling, blowing cold air, or making a sound it didn’t make last winter, call (747) 966-3037. We know the subdivisions off Hwy 78 and Hwy 138 better than any out-of-town crew, because those are the homes we work in week after week. The houses there were built in the same 1998-2008 window, which means their furnaces are aging on nearly identical timelines, and we’ve learned exactly what fails first in that generation of equipment.
Why Meadowsweet Heating & Air Is Loganville’s Preferred Furnace Repair Company
Loganville homeowners call us because we show up when we say we will, with a written price in hand before any work starts. That’s not a marketing line; it’s part of the Cedarwell Care Promise our company has operated under since 2004. Every tech who walks into a Loganville home is background-checked, uniformed, and trained on the C.A.R.E. values code: clean up like it’s their own home, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. If your kids are napping or your dog is nervous around strangers, say so on the phone. We’ll work around both.
We service nine major furnace brands, including Rheem, York, Daikin, and Bryant, and we keep common repair parts stocked locally so a Loganville call doesn’t turn into a two-day wait for a part to ship from a distributor in Atlanta. When a furnace goes down on a cold January night, that matters. A live person answers our phone 24 hours a day, seven days a week, including holidays. No voicemail tree, no “press 2 for service.” You call, a person picks up, and we get a tech headed your way.
Boiler Repair in Loganville
Boiler Repair in Loganville is less common than furnace work, but the boilers we do see tend to be in older homes along the Walton County side of town, and they fail in predictable ways: failing circulator pumps, air-locked radiators, and pressure relief valves that start dripping. A boiler that’s losing pressure or making banging sounds in the pipes shouldn’t wait. A typical boiler repair in Loganville runs $150-$700 depending on whether we’re replacing a pump, a valve, or a control board.
Circulator Pump and Pressure Issues
When a Loganville boiler’s circulator pump begins to seize, rooms at the end of the loop go cold first. We test the pump, check system pressure, and replace the part the same visit whenever possible. If the pressure relief valve is leaking steadily, that’s often a symptom of an expansion tank that’s failed, not just a worn valve. We look at the whole loop before quoting the fix.
Radiator and Zone Valve Repairs
Older Loganville boilers often feed radiators through zone valves that stick over time. If one floor is warm and another is cold, a zone valve or its thermostat is usually the culprit. We replace valves, purge air from the system, and verify every zone heats evenly before we leave.
Gas Furnace Repair in Loganville
Gas Furnace Repair in Loganville is where we spend most of our winter call volume, and for good reason: the city’s 1998-2008 building boom left thousands of homes with builder-grade gas furnaces now entering their third decade. The most common repairs are ignitor replacements, flame sensor cleaning, gas valve replacements, and inducer motor failures. A typical gas furnace repair in this market runs $150-$700, and we’ll always give you the exact number in writing before we turn a wrench.
Ignitor and Flame Sensor Failures
If your Loganville furnace clicks on, runs the inducer, and then shuts down without lighting, the hot surface ignitor has likely cracked. If it lights briefly and drops out, the flame sensor is dirty or failing. Both are straightforward fixes we handle regularly. The bigger concern with a furnace this age is what we can’t see until we open the cabinet.
Heat Exchanger Inspection and Replacement
Before we replace any ignitor on a 15-to-25-year-old Loganville furnace, we inspect the heat exchanger. A cracked heat exchanger in that generation of Carrier, Trane, or Goodman equipment is not uncommon, and it’s also a safety issue that can put carbon monoxide into your living space. Safety caveat: a cracked heat exchanger is not something to ignore or work around. If we find one, we’ll show you the crack with a camera, shut the unit down, and explain your replacement options clearly. This is exactly why we always recommend a professional inspection rather than a reset-and-go fix.
Trusted Brands We Service in Loganville
We’re factory-trained on nine leading furnace brands, so your Loganville home doesn’t need a different company depending on what’s in the utility closet. Our techs work on Rheem and York units regularly, along with Daikin and Bryant systems that show up in the newer subdivisions near Grayson and Dacula. We keep ignitors, flame sensors, pressure switches, and blower motors in our local stock for the brands most common in Loganville, which shortens repair time when a part has failed outright. Whether it’s a Goodman from 2004 or a newer Bryant variable-speed unit, the tech who arrives will know the equipment before they open the panel.
Common Furnace Repair Problems We See in Loganville Homes
- Builder-grade heat exchangers cracking on schedule. The 1998-2008 housing wave gave Loganville thousands of furnaces that are now 15-25 years old. We’ve replaced cracked heat exchangers on nearly identical Goodman and Carrier units in subdivisions across the city this year alone.
- Blower motors overworked by attic ductwork. Two-story Loganville homes route supply ducts through unconditioned attics that hit 130°F plus in summer. That heat drives static pressure up, forcing blower motors and inducers to work harder than their original sizing ever anticipated. We see the result: early motor failures and noise complaints.
- Short-cycling on cold January mornings. When a heat pump’s outdoor coil freezes from a Blue Ridge ice storm, the system flips to emergency heat. If the furnace then short-cycles, it’s often a dirty flame sensor or an overheating limit switch. These calls spike every January and February in Loganville.
- Permit confusion on county-line streets. Subdivisions off Hwy 78 and Hwy 138 can fall on either side of the Walton/Gwinnett line. If your furnace repair requires a permit or inspection, the wrong assumption about which county applies can delay the job. We check before we quote.
Pricing for Furnace Repair in Loganville, GA
Here’s what furnace repair actually costs in Loganville right now. These are the ranges we quote, and they match the market for this part of Gwinnett and Walton County in 2025.
| Service | Loganville Price Range |
|---|---|
| Ignitor replacement | $150-$300 |
| Flame sensor cleaning or replacement | $150-$250 |
| Gas valve replacement | $300-$550 |
| Blower motor replacement | $350-$700 |
| Inducer motor replacement | $300-$550 |
| Heat exchanger inspection | $150-$250 (often included with repair) |
The spread depends on the part, the brand, and whether we’re working on a single-stage builder-grade unit or a variable-speed system. You’ll know your exact number before we start. Estimates are free, and we never begin a repair without your written approval.
We Also Serve Cities Near Loganville
If you’re a few minutes outside Loganville proper, we likely cover your street too. Our Furnace Repair team routinely runs calls to Grayson, Dacula, Snellville, and Buford, and the pricing stays consistent across the area. Visit our Furnace Repair in Loganville page for city-specific details, or just call and ask. If we serve your street, we’ll tell you straight.
Serving Loganville, GA - Our Local Coverage Area
We’re based in the Loganville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Loganville
Almost certainly not. Builder warranties on furnaces from the 1998-2008 Loganville construction wave typically covered parts for one to five years and the heat exchanger for twenty at most, but only if the homeowner registered the unit with the manufacturer and kept proof of annual maintenance. Most people didn’t register. We were called to a two-story on a subdivision street off Hwy 138 where a 2004 Goodman gas furnace was short-cycling and the heat exchanger showed visible cracks. The old unit’s lapsed warranty meant the cracked heat exchanger was never covered; the homeowner replaced the furnace with a properly load-calculated Carrier unit and registered the new warranty on the spot. Call (747) 966-3037 and we can check your serial number against the manufacturer’s records before you spend anything.
Short-cycling in that setup usually means the flame sensor is dirty, the limit switch is tripping from an overheating cabinet, or the furnace is oversized for the ductwork. Loganville’s builder-grade homes from the 2000s were often sized by rule of thumb rather than a proper load calculation, so the furnace fires, overheats the plenum, and shuts down early. It’s frustrating, but it’s also diagnosable in one visit. Call (747) 966-3037 and we’ll test the sensor, check static pressure, and tell you what’s actually causing the cycling.
It depends on which side of the county line your home sits on, and that line splits Loganville subdivisions in ways that catch out-of-area crews off guard. A street off Hwy 78 may fall under Gwinnett County’s permitting and inspection rules, while the cross street behind it is Walton County’s jurisdiction. We verify your county before we quote any replacement, and we pull the correct permit ourselves. No guesswork, no delay from a rejected application. Call (747) 966-3037 and we’ll check your address in about sixty seconds.
Yes, and it’s one of the most common findings on two-story Loganville homes with attic ductwork. The unconditioned attic reaches extreme temperatures in a Georgia summer, so the blower motor pushes against hotter, more resistant duct runs. That raises static pressure, strains the motor, and shortens its life. If you’re hearing bearing noise or a rumble when the blower ramps up, the motor is telling you it’s overworked. We’ll measure static pressure, check the duct runs, and quote a repair that addresses the motor and the airflow problem behind it. Call (747) 966-3037 to schedule a diagnostic.
Most repairs on 2000s-era builder-grade furnaces in Loganville run $150-$700, with ignitors and flame sensors at the low end and blower motors or gas valves at the high end. A cracked heat exchanger on a unit that age is usually a replacement situation, not a repair, so we’ll show you the crack and give you a written replacement price before you decide anything. Every quote is free, and the price we write is the price you pay. Call (747) 966-3037 for an exact number on your unit.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Loganville as part of the Cedarwell family of HVAC companies since 2004.