Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Malibu
Furnace repair in Malibu typically costs $150 to $700, and most jobs can be diagnosed the same day. We work throughout the city, from PCH-facing beachfront homes to the inland canyons, and we know how different those environments are for heating equipment. If your furnace has stopped heating, won’t hold flame, or is short-cycling, call Meadowsweet Heating & Air at (747) 966-3037 for a free estimate. A live person answers, even at night.
Our Furnace Repair team carries parts for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so we’re not stuck waiting on a supply house when a Malibu home needs help today.
Why Meadowsweet Heating & Air Is Malibu’s Preferred Furnace Repair Company
Malibu homeowners face a set of conditions that most HVAC companies never see: Coastal Commission permit review, salt in the air, wildfire smoke in the canyons, and whole neighborhoods rebuilt after the Woolsey Fire. We have worked in those homes. Luis Serrano, our owner, has structured the company around one standard: a written price before any work starts, background-checked technicians in uniform, and a 365-Day Done Right Promise that means if something isn’t done right, we make it right.
Every visit includes shoe covers and drop cloths before a boot hits your floor, plus a photo of the clean-up before our crew leaves. That matters in Malibu, where homes are full of sand, kids, pets, and expensive flooring. Our crews follow the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work begins. No surprises, no upsell, no pressure.
We answer the phone 24/7. When a furnace quits on the first cold night of November in Trancas Canyon or a vacation rental in Point Dume won’t heat on check-in day, someone picks up the line and starts getting a trained technician to you. That’s part of the Cedarwell Care Promise, and it’s not an extra charge.
Boiler Repair in Malibu
Boiler Repair in Malibu is a specialized job because most of the boilers here heat homes in older beach cottages and canyon properties that were built before forced-air became standard. A boiler uses hot water or steam through radiators or in-floor loops, and when it fails, the whole house goes cold with no airflow to fall back on. Repair usually means diagnosing the burner assembly, circulator pump, pressure relief valve, or heat exchanger. In Malibu, a boiler repair typically runs $150 to $700 depending on what has failed, and we provide the exact written price before we turn a wrench.
Salt-Air Corrosion on Boiler Components
Homes within a few hundred yards of PCH live with airborne salt for most of the year. Boiler burner assemblies, flue pipes, and control wiring corrode faster here than anywhere in Los Angeles County. We replace corroded burners and uncoated piping with components matched to coastal exposure, not inland assumptions.
Boiler Service for Vacation Homes
Many Malibu boiler systems sit dormant for months between visits. When a homeowner arrives on a winter weekend and the boiler won’t fire, the problem is often a seized circulator pump or a failed ignition control that corroded while idle. We can get out quickly and restore heat before the weekend is lost.
Gas Furnace Repair in Malibu
Gas Furnace Repair in Malibu starts with one question that almost never comes up in Thousand Oaks or Westlake Village: will the repair trigger a Coastal Development Permit? Because nearly all of Malibu falls within the California Coastal Commission’s jurisdiction, even a same-unit furnace replacement or a gas line modification on some parcels needs permit review before work proceeds. We know the distinction between a like-for-like parts repair and a scope change that triggers review, and we’ll tell you which one you’re looking at before you spend a dollar. Gas furnace repair itself typically runs $150 to $700, and our diagnostic visit sets that out plainly.
Heat Exchanger Failure from Inland Sizing
We continue to see post-Woolsey rebuilds in Point Dume and the western canyons where builders or contractors sized furnaces using inland load tables. Those tables assume hotter summers and colder winters than Point Dume actually gets. The furnace is too big, cycles on and off in short bursts, and the heat exchanger develops stress fractures. We run a fresh load calculation against actual coastal design temperatures before recommending replacement.
Gas Valve and Ignitor Replacement
A furnace that won’t light in Malibu often needs an ignitor or a gas valve. Ignitors crack with age and fail silently. Gas valves wear out from years of cycling. Both are straightforward parts replacements for our team, and both are jobs where the written price shows up before we start.
Trusted Brands We Service in Malibu
We service Goodman, Rheem, York, and Daikin furnaces regularly in Malibu, along with the full range of major equipment brands. Our local parts availability means a common blower motor, ignitor, or flame sensor doesn’t leave your family without heat for days. For less common parts, we coordinate shipping and scheduling so you know exactly when the repair will be complete. The brand on the cabinet matters less to us than whether the install was correct for the home it sits in, and that local perspective is exactly what Malibu’s coastal and canyon homes require.
Common Furnace Repair Problems We See in Malibu Homes
- Salt-corroded burner assemblies on PCH-facing homes. The marine layer carries salt that eats uncoated flame sensors and burner tubes within two to three seasons. We see furnaces that are barely five years old with corrosion that would take twenty years inland.
- Short-cycling in post-Woolsey rebuilds. Tight building envelopes and oversized furnaces create on-off cycling that stresses heat exchangers. This leads to cracking and repeated lockouts, especially in Point Dume and Simi Hills-adjacent canyon lots.
- First-day-of-occupancy failures in vacation homes. Blower motors seize, capacitors weaken, and thermostat calibration drifts while a second home sits through winter marine air. The furnace worked in June and died by Thanksgiving, and the owner discovers it at check-in.
- Wildfire smoke clogging canyon-home filters and fans. Santa Ana wind events push smoke into Malibu Canyon, Trancas Canyon, and Latigo Canyon homes. Furnaces with standard one-inch filters clog in days, strain the blower motor, and recirculate smoke.
Pricing for Furnace Repair in Malibu, CA
Furnace repair in Malibu spans a wide range because the job might be a $150 flame sensor replacement or a $700 blower motor and control board on a canyon estate. We publish these ranges so families can plan before calling, and every job gets a written price before work begins regardless of what we find.
| Service | Typical Malibu Cost |
|---|---|
| Furnace Repair | $150-$700 |
| Tune-Up | $80-$200 |
What affects the price: the part that failed, how difficult access is on your property, and whether the furnace’s environment has accelerated corrosion in a way that requires replacing adjacent components. Estimates are free. Call (747) 966-3037 and we’ll tell you what we expect to find before we arrive.
We Also Serve Cities Near Malibu
Our crews work throughout Malibu and the surrounding hills, including Agoura Hills, Westlake Village, Thousand Oaks, and Calabasas. If your furnace is down and you’re in any of those areas, the same written-price policy and 365-Day Done Right Promise apply. One phone call to (747) 966-3037 gets you on the schedule.
Serving Malibu, CA - Our Local Coverage Area
We’re based in the Malibu area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Malibu
It depends on the parcel and the scope. Many Malibu properties fall under the California Coastal Commission’s jurisdiction, and a furnace replacement that moves equipment, changes gas lines, or alters exterior components can require a Coastal Development Permit even when the repair itself is routine. Like-for-like parts replacement inside the existing unit typically does not. We walk you through this before any work starts, and we never proceed without clarity on where your property stands. Call (747) 966-3037 and we’ll help you sort it out.
Furnaces that sit idle for months in marine air develop problems silently: blower motors stick, capacitors lose charge, thermostat calibration drifts, and ignition controls corrode. The system was working when you closed up in May, but by Thanksgiving the salt and humidity have done their work. Our team can diagnose and repair these first-day-of-occupancy failures quickly. Call us before you arrive and we’ll prioritize getting heat on.
Post-Woolsey Fire rebuilds in Point Dume were built to updated Title 24 energy codes with tight envelopes, and many contractors sized the furnaces using inland load tables that don’t match the actual coastal design temperatures. The furnace is too big for the house, so it blasts heat for a few minutes, shuts down, then restarts. That cycling stress cracks heat exchangers and drives up energy bills. We run a load calculation against the actual coastal conditions and correct the sizing. Call (747) 966-3037 to schedule a diagnostic.
Salt-laden marine air corroding the burner assembly, flame sensor, and uncoated refrigerant lines. On homes directly on PCH, uncoated aluminum components fail within two to three seasons. We replace them with coastal-rated or epoxy-coated parts so the same failure doesn’t return on the same timeline. If your beachfront furnace won’t fire or flame keeps dropping out, call us for a diagnostic visit.
First, check the filter. Santa Ana wind events push smoke through Malibu Canyon and Trancas Canyon homes, and a standard one-inch filter clogs in days. A clogged filter strains the blower motor and recirculates smoke. Upgrading to a high-MERV filter or whole-home filtration system makes the furnace part of your smoke defense instead of a weakness. We can show you what your system will hold and what it needs. Call (747) 966-3037 for an evaluation.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Malibu since 2004.