Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Venus
Furnace repair in Venus, TX typically costs $150-$700 depending on the part that failed and the system you have. Most calls we run in Venus involve propane furnaces or heat-pump auxiliary heat rather than natural gas, because the gas mains don’t extend far past the town core. When your heat goes out on a Venus night in the teens, you need someone who knows this equipment and can get to you fast. Call (747) 966-3037 and a live person answers, day or night.
Why Meadowsweet Heating & Air Is Venus’s Preferred Furnace Repair Company
We work throughout Venus regularly, from the newer subdivisions along the FM 1387 corridor to the older ranch homes near the original town center. Homeowners here tell us the same thing: they want a crew that shows up on time, names a written price before touching anything, and leaves the floors clean enough for a crawling baby or a curious dog. That’s our standard on every job, not an add-on.
Our technicians are background-checked, uniformed, and trained on nine furnace and heat pump brands, including Trane, Lennox, Goodman, and Rheem. We follow the C.A.R.E. values on every visit: Clean up like it’s our own home, Ask before moving anything, Respect your family’s time, and Explain the price before the work starts. Luis Serrano leads our team and holds every tech to that code. If something isn’t done right, the 365-Day Done Right Promise means we make it right, no runarounds and no fine print.
Gas Furnace Repair in Venus
Gas Furnace Repair in Venus almost always means propane, because most homes outside the town core sit beyond the natural-gas mains. That changes the diagnosis. Propane systems develop different failure patterns than natural-gas systems: igniters soot up when tanks run low, flame sensors carbonize faster with propane’s different burn characteristics, and gas valves see pressure swings as tank levels drop. A tech who only works natural-gas furnaces can miss what’s actually wrong. Our crews work on both fuel types every week.
Ignitor and Flame Sensor Work
A propane furnace that short-cycles on low fuel will soot the igniter and flame sensor fast. We replace hot-surface igniters on Trane, Lennox, Goodman, and Rheem units, and we can usually have the part in hand same-day from our Dallas-Fort Worth supply chain. Expect $150-$450 for igniter or flame sensor replacement in Venus.
Gas Valve Repair
When a gas valve sticks or fails to hold pressure, the furnace won’t fire at all. On propane systems this can be a tank-pressure issue, a regulator issue, or a valve issue, and we test the whole line before replacing parts. Gas valve repair in Venus typically runs $250-$700. We write the price before any work starts.
Furnace Tune Up in Venus
A Furnace Tune Up in Venus should happen every fall, before the first ice storm. That’s especially true on rural properties where a propane tank, a heat pump, and a workshop furnace all share the same maintenance schedule. A tune-up runs $80-$200 and includes a combustion check on gas units, a heat-strip amp draw test on heat pumps, filter replacement, and a written report of everything we found. We don’t pay our techs on what they sell, so there’s no pressure.
What We Check on Propane Systems
We inspect the igniter, flame sensor, gas valve, regulator, and tank-line connections. We also check for sooting at the burners and measure manifold gas pressure. If your tank has been run low, we’ll tell you honestly whether the furnace needs cleaning or just a full tank and a reset.
Heat Pump Auxiliary Heat Verification
For Venus homes that heat with a heat pump, we verify the auxiliary heat strips are sized for low-teen ice-storm lows and that the sequencer and relays are in good shape. An undersized heat strip is the single most common reason a Venus heat pump runs continuously while the house still feels cold. We catch this during a tune-up, before the freeze.
Trusted Brands We Service in Venus
We service Trane, Lennox, Goodman, and Rheem as a core focus, along with five other major brands. Many Venus new-construction homes have builder-grade Goodman or Lennox split systems, and we stock common igniters, flame sensors, capacitors, sequencers, and blower motors for those units. That means less waiting when your heat is out. For older ranch homes with a Trane or Rheem furnace, we source parts from our Dallas-Fort Worth supply network and can usually complete the repair the same day. Just call (747) 966-3037 and tell us what you’ve got.
Common Furnace Repair Problems We See in Venus Homes
- Propane igniters and flame sensors sooting up. Rural Venus homeowners often run their propane tanks low between fills. The furnace short-cycles on low fuel and carbon builds on the igniter and flame sensor, so the unit locks out on cold mornings.
- Heat-strip failures on ice-storm days. Newer Venus slab homes built after 2015 frequently have heat pumps with auxiliary electric strips that are too small for the low-teen temperatures the area sees during ice storms. The compressor carries the whole load, the house never reaches setpoint, and the sequencer burns out.
- Flex-duct boot separation from Blackland Prairie clay movement. The expansive shrink-swell clay under Venus shifts slabs and racked duct runs. Flex-duct connections at the air handler collar and register boots can pull loose within three to five years, dumping heated air into the attic and starving the furnace of return air.
- Dirty coils and failed capacitors after hard cooling seasons. The North Texas heat corridor works builder-grade systems hard all summer. By winter, dirty evaporator coils and weakened capacitors surface as no-heat calls when the furnace or heat pump tries to switch over.
Pricing for Furnace Repair in Venus, TX
Here are the honest numbers for Venus. A tune-up runs $80-$200. Most repairs fall between $150 and $700. An igniter or flame sensor replacement is usually $150-$450. A gas valve replacement lands at $250-$700. Sequencers and heat-strip repairs on heat pumps sit in the $200-$500 range. A blower motor can push toward the top of that range. We give a written price before any work starts, on every visit, so there’s no guessing and no surprise line items.
| Service | Price Range in Venus |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Tune-Up | $80-$200 |
Call (747) 966-3037 for a free estimate on your exact system. We’ll talk through what you’re seeing and give you a straight answer.
We Also Serve Cities Near Venus
Our Furnace Repair team covers Venus and the surrounding communities. If you’re in Alvarado, Midlothian, Mansfield, or Grandview, you’ll get the same written price, the same shoe covers and drop cloths, and the same 365-Day Done Right Promise. Dispatch runs from our Dallas-Fort Worth office, and crews serve Venus locally every week.
Serving Venus, TX - Our Local Coverage Area
We’re based in the Venus area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Venus
Yes. Propane furnaces develop different failure patterns than natural-gas units, including faster flame-sensor carbonization and igniter sooting when the tank has run low, plus gas-valve issues tied to tank pressure swings. Our techs test the tank side and the furnace side together rather than treating the furnace in isolation. Call (747) 966-3037 and we’ll walk through what your system is doing.
The most common cause in Venus is an undersized auxiliary heat strip on a newer slab home, where the heat pump was sized for cooling loads and the aux heat was never sized for low-teen ice-storm temperatures. The compressor carries the whole heating load, and the house can’t reach setpoint. We test amp draw on the heat strips and verify the sequencer and relays during repair. Call (747) 966-3037 for an exact diagnosis and a written price.
It can. The shrink-swell clay under Venus expands and contracts through wet and dry cycles, and that movement can shift slabs and pull flex-duct boots loose at the air handler collar or register boots within three to five years. The furnace ends up starving for return air, static pressure rises, and the system runs hotter and less efficiently. We check duct connections on every furnace service call in Venus. Call (747) 966-3037 if your system has been noisier or less effective than it used to be.
At least once a year, every fall, for each conditioned space. A propane furnace, a heat pump, and a workshop unit each need their own inspection. A tune-up runs $80-$200 per system, and we can do them all in one visit. Call (747) 966-3037 to schedule before the first freeze.
We do. We service Trane, Lennox, Goodman, and Rheem, plus five other major brands. Most Venus new-construction homes have builder-grade Goodman or Lennox split systems, and we stock common repair parts for those units so we can often finish the job the same day. Call (747) 966-3037 and tell us what’s on the data plate.
When your furnace quits on a cold Venus night, you need a straight answer and a fast, clean repair. Call (747) 966-3037 now. We’ll give you a written price before any work starts, and we’ll leave your home the way we found it: floors clean, kids and pets undisturbed, heat working.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Venus since joining the Cedarwell family of HVAC companies, founded in 2004.