Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterTrusted Heating Repair Nationwide
Heating repair means restoring a furnace or heat pump that has stopped producing heat, is blowing lukewarm air, or is making noises it shouldn’t. Most repairs fall between $150 and $650 depending on the part that failed and how long the fix takes, and a lot of jobs are finished the same day a technician arrives. Meadowsweet Heating & Air has been part of the Cedarwell family of HVAC companies since 2004, with crews that service nine major equipment brands and stand behind every job with the 365-Day Done Right Promise. A live person answers every call at (747) 966-3037, day or night. When the house is getting cold, you want a technician who treats the floors, the pets, and the sleeping kids with the same care as the equipment itself. That is how we work.
Key Takeaways
- Heating repair typically costs $150 to $650 for most single-part failures and same-visit fixes.
- A written price comes before any work starts, every visit, no exceptions.
- Shoe covers and drop cloths go down inside the home, with a photo of the clean-up before the crew leaves.
- A live person answers calls 24/7, including weekends and holidays, at (747) 966-3037.
Furnace Repair
Furnace repair covers the gas and electric heating systems that warm most homes in the country. You need it when the furnace won’t start, shuts off after a few minutes, or runs without making the house any warmer. Most furnace repairs cost $150 to $650, and the written price is in your hand before the technician opens a tool bag. At Meadowsweet Heating & Air, a furnace visit is a real inspection: the technician checks the thermostat signal, the ignition sequence, the flame, the blower, the safety switches, and the venting, then tells you exactly which part failed and why. Furnaces are simple machines that depend on a precise order of events, and when one step is skipped the whole system locks out to protect you. Finding that one step is the job.
Gas Furnaces
A gas furnace has to light, prove its flame, and move heated air in the right order. Dirty flame sensors, worn ignitors, and clogged filters cause most no-heat calls, and all three are quick fixes for a trained technician. Gas work also means safety checks on the burners and the flue, so this is never a do-it-yourself job.
Electric Furnaces
Electric furnaces use heating elements, sequencers, and relays instead of burners. When one element or relay fails, the unit may still blow air but never warm it. We test each stage with a meter and replace only the part that has actually failed.
Heat Pump Repair
Heat pump repair addresses systems that move heat in and out of the house with refrigerant instead of burning fuel. You need it when the unit runs but the air stays cool, when ice builds up on the outdoor coil and doesn’t clear, or when the system keeps switching to emergency heat. Most heat pump repairs run $150 to $650, with a reversing valve or compressor-related job sitting at or above the top of that range. Our technicians test refrigerant pressures, the defrost cycle, the reversing valve, and the electrical components before recommending anything. A heat pump works in both directions, so a fault that shows up in winter can also explain why the system struggled all summer. We tell you what we find and what it costs in plain English.
Defrost Problems
Every heat pump goes into a defrost cycle in cold weather to melt frost off the outdoor coil. Steam rising from the unit during that cycle is normal. A thick shell of ice that stays put is not, and it usually points to a failed defrost board, a bad sensor, or low refrigerant. We find the cause before touching the charge.
Ignitor and Flame Sensor Replacement
Ignitor and flame sensor replacement is one of the most common and most affordable heating repairs, typically between $150 and $300 during a service call. The ignitor is the part that lights the burners, and the flame sensor is the small rod that tells the control board the flame is real. When either one wears out, the furnace clicks, tries to start, and shuts down again within a few seconds. You will often hear the draft inducer run, then silence. At Meadowsweet Heating & Air, we clean or replace the part, then run a full heating cycle to confirm the burners stay lit. We stock the common ratings on our trucks, so most of these repairs finish in a single visit.
Why It Shouldn’t Wait
A furnace that keeps trying to light and failing puts extra strain on the control board and the inducer motor. Replacing a low-cost ignitor now is cheaper than replacing a control board later, and the repair takes under an hour in most cases.
Blower Motor and Control Board Repair
The blower motor pushes warm air through your ducts, and the control board runs the whole heating sequence. When the blower fails, the furnace may fire up and then overheat and shut down because the heat has nowhere to go. When a control board fails, the system may ignore the thermostat entirely or show an error code on its status light. These repairs usually run $400 to $650 with parts and labor. We test the motor capacitor and wiring first, because a weak capacitor can mimic a dead motor and costs far less to fix. Airflow problems also look like heating problems, and a correct diagnosis saves you from paying for a part your system never needed.
Thermostat and Wiring Faults
Sometimes the equipment is fine and the thermostat has lost its calibration, its batteries, or its connection. We check the thermostat and low-voltage wiring on every call. Sometimes the answer is a $20 set of batteries and a free lesson in what to look for next time.
Emergency Heating Repair
Emergency heating repair is same-day or after-hours service for heating failures that cannot wait for a scheduled appointment, such as a total outage during a hard freeze, a gas smell, or a burning odor from the equipment. Meadowsweet Heating & Air answers every call with a live person, 24 hours a day, 7 days a week, including nights, weekends, and holidays, at (747) 966-3037. Emergency visits fall within the same repair range of $150 to $650 for the fix itself, and because we do not charge overtime premiums or after-hours surcharges, the late-night price is the same as the Tuesday-afternoon price. A house with no heat is a real risk for babies, older adults, and anyone with a heart or breathing condition, so we dispatch quickly and never use scare pricing at the door.
What Counts as an Emergency
If you smell gas, leave the house and call your gas utility from outside, then call us. Total loss of heat in freezing weather, visible smoke, or a persistent burning smell are also emergencies. If the unit is making a loud banging or grinding sound, shut it off at the thermostat and the breaker. The person who answers will help you decide whether it can wait or needs a truck right now.
Heater Blowing Cold Air
Heater blowing cold air is one of the most common reasons people call us, and it has a short list of typical causes: a failed ignitor or flame sensor, a tripped limit switch, a clogged filter, a thermostat set to fan only, or a heat pump stuck in the wrong mode. You need a diagnosis when the vents move air but never warm it, when only some rooms stay cold, or when the system cycles on and off without reaching the set temperature. Most of these fall between $150 and $650 to repair, and the first step is always an accurate diagnosis, not a parts cannon. Sometimes the answer is a $15 filter. Sometimes it is a part that needs ordering. Either way, you hear it plainly and see the price in writing first.
Brands We Service
Our technicians service all nine major residential equipment brands, and they do it with the right parts and the right training for each platform. We have worked extensively with Carrier furnaces and heat pumps, stocking the OEM ignitors, sensors, and control boards that keep repairs down to one visit. On Trane and American Standard systems, we know the common failure points on their variable-speed blowers and communicating thermostats.
Bryant and Lennox equipment often comes with specific control and ignition specifications, and we match the repair to the manufacturer’s published specs rather than using one-size-fits-all parts. Rheem, Goodman, York, and Daikin all have their own quirks, and our crews see enough of each to know what fails, why, and what it costs to fix before the first part is ordered.
Signs You Need a Pro Right Now
- The furnace clicks, tries to light, and quits. That pattern usually means a worn ignitor or dirty flame sensor. Letting it cycle for days strains the control board.
- A burning or gas smell that does not clear. A little dust burning off on the first cold day is normal. A smell that lingers means a possible wiring, motor, or gas problem. Shut the system off and call.
- Loud banging, squealing, or rattling. Delayed ignition, a failing blower bearing, or a loose panel each make their own noise, and none of them fix themselves.
- Heat pump coated in thick ice. Frost that doesn’t clear after a defrost cycle can damage the coil and the compressor if the system keeps running.
- Your heating bill climbed with no change in use. A system running longer to reach the same temperature is telling you a part is wearing out.
Our Process, Step by Step
- 1
Call and talk to a live person. Every call to (747) 966-3037 is answered by a human being, day or night. We take your address, ask what the system is doing or not doing, and set a time window that works for your family’s routine.
- 2
The technician arrives in uniform with shoe covers on. Before stepping inside, the technician puts on shoe covers and lays down drop cloths in the work path and around the equipment. We ask before moving anything, and we keep noise down during nap and school hours when you tell us to.
- 3
Diagnosis with tools, meters, and your input. The technician tests electrical readings, ignition sequence, airflow, and refrigerant pressures on heat pumps, and asks what you’ve noticed: when it started, what sounds or smells you caught, which rooms feel fine and which don’t.
- 4
A written price before any work starts. You see the exact cost of the repair, the parts, and the labor, on paper, before we pick up a tool. If there are several possible fixes, we explain each one and what it costs. You approve the work, or you don’t, with no pressure either way.
- 5
The fix, the test, and the clean-up photo. After the repair, the technician runs the system through a full heating cycle and verifies the temperature rise, the airflow, and the thermostat. Then we clean the work area, take a photo of the finished space, and show it to you before we leave.
How Much Does Heating Repair Cost?
Most single-part heating repairs in the United States fall between $150 and $650, and the final number depends on which component failed and how accessible it is. An ignitor, flame sensor, or capacitor usually sits at the low end, between $150 and $300. A draft inducer motor or limit switch runs $250 to $500 with the part and labor. A blower motor or control board replacement lands between $400 and $650. Heat pump refrigerant and reversing valve repairs vary because the fault has to be pinned down first. A heat exchanger crack or compressor failure can exceed $650 and may be worth weighing against a new furnace installation or heat pump installation, and we walk you through that math honestly rather than pushing a replacement you don’t need.
What affects the price most is the part itself, followed by the time needed to reach it and whether the system uses proprietary components. Avoiding overpaying means getting a written price before the work starts and asking for the diagnosis in plain English. Every Meadowsweet Heating & Air estimate is free and includes the diagnostic work, the written price, and a clear recommendation. You will never be charged for a repair you did not approve. Regular AC maintenance visits can include a heating check too, which catches many of these failures before the first cold night.
Where We Work
Meadowsweet Heating & Air serves homeowners and businesses across the United States through local crews who live in the communities they service. Every technician is background-checked, uniformed, and held to the Cedarwell Care Promise, no matter where the job takes them. When you call, you get a live person who can schedule the nearest available technician for your home or workplace. The standards don’t change from one side of the country to the other, and neither do the prices you see before the work begins. You can also start from our home page to see everything we do.
Frequently Asked Questions About Heating Repair
Heating repair is the diagnosis and correction of any failure that keeps a furnace or heat pump from warming your home the way it should. That covers ignitors, flame sensors, blower motors, control boards, thermostats, and reversing valves. At Meadowsweet Heating & Air, every repair comes with a written price before the work starts and a 365-Day Done Right Promise after it’s finished.
Most common repairs, like an ignitor, flame sensor, or capacitor replacement, take under an hour once the technician is on site. Blower motor and control board jobs can run two to three hours. The diagnosis usually takes 30 to 45 minutes, and you see the written price before any repair begins.
Most residential heating repairs fall between $150 and $650 depending on the failed part and the labor required. Ignitors, flame sensors, and capacitors sit at the low end, while blower motors and control boards land closer to the top. Every estimate includes the diagnostic. Call (747) 966-3037 for an exact quote on your system.
Yes. Our technicians repair gas furnaces, electric furnaces, and heat pumps from all nine major residential brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your brand isn’t on that list, call anyway and we can likely help.
Yes. A live person answers the phone 24 hours a day, 7 days a week, including nights, weekends, and holidays, with no voicemail queue. There are no overtime or after-hours surcharges, so the late-night price is the same as the weekday price. Call (747) 966-3037 any time.
Every repair Meadowsweet Heating & Air performs is backed by the 365-Day Done Right Promise. If the repair is not done right, we make it right, with no runarounds and no fine print. Manufacturer warranties on parts are also honored, and we explain what your system’s warranty covers during the visit.
Schedule Your Heating Repair Service Today
When the house is cold, you want a crew that shows up, tells you the truth, and leaves the place cleaner than they found it. Call (747) 966-3037 for a free, no-obligation estimate, and a live person will set your appointment any time of day or night. Your written price comes before any work starts, and the 365-Day Done Right Promise means the job isn’t over until it’s right.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving the United States since 2004.