Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Bellevue
A new air conditioning system in Bellevue typically costs between $3,500 and $7,500, and most standard installs are completed in one to two days once equipment arrives. That price covers the full job: load calculation, equipment, ductwork adaptation or new runs, electrical, permits, startup, and a written price before any work begins. We serve every Bellevue neighborhood, from Lake Hills to Eastgate to downtown, with crews who know the Eastside’s housing stock because they work in it every week. If you need a straight answer about your home and your budget, call Luis Serrano and our team at (747) 966-3037.
What makes Bellevue different from most cities is simple: the marine air off Puget Sound carries salt and damp into outdoor condenser cabinets year-round, and it corrodes coils and cabinets faster here than in drier Eastside cities like Sammamish or Issaquah. A standard coil that might last fifteen years inland can pit and fail far sooner in Bellevue. That single fact shapes how we recommend equipment, and it’s why we treat factory-coated condenser coils and corrosion-resistant cabinets as standard upgrades on Bellevue installs rather than optional add-ons. Our AC Installation team sizes every system with a full load calculation, not a guess off square footage, so the unit runs efficiently through Bellevue’s damp springs and increasingly hot summers.
We also know what Bellevue’s older homes actually look like inside the walls. Many 1950s through 1970s ranches and split-levels in Lake Hills and Eastgate still run on original electric baseboard heat with no ductwork at all. That means a real install often involves routing new ducts through finished ceilings and cramped crawlspaces, not just swapping a furnace. It’s a bigger job, and we price it honestly upfront so there are no surprises on day two. For any home in Bellevue, we start with a load calculation and a written quote before any equipment is ordered.
Why Meadowsweet Heating & Air Is Bellevue’s Preferred AC Installation Company
Meadowsweet Heating & Air is an independently owned location within the Cedarwell family of HVAC companies, founded in 2004. What that means for Bellevue homeowners is a set of standards that is not optional on any job: a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise that stands behind every installation. If something is not done right, we make it right. No runarounds, no fine print.
Our crews follow a code of conduct called the C.A.R.E. values: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. On every Bellevue install, technicians wear shoe covers and lay down drop cloths before bringing equipment through the house. Before the crew leaves, we take a photo of the clean-up and send it to you. That is included on every job, not an upsell.
We are qualified to install and service equipment from nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. When our Bellevue customers ask us to recommend a system, we lean toward what handles the marine air best. A live person answers our phone 24 hours a day, 7 days a week, including nights and weekends. No voicemail queue.
Luis Serrano leads our installation work across the Eastside. He has spent enough time in Bellevue crawlspaces and attics to know that a 1960s Lake Hills split-level and a 2015 downtown condo have almost nothing in common mechanically. That local knowledge is why we do not use a one-size-fits-all pricing sheet. We look at your house, your ductwork, your electrical panel, and your neighborhood’s specific exposure to salt air before we recommend anything.
Furnace Installation in Bellevue
Furnace Repair - Bellevue and installation runs $3,500 to $7,500 for a standard replacement, but the job here often involves more than a simple swap. Many Bellevue homes still carry the furnace that was installed when the house was built, and those older systems were sized for a different climate. We replace them with furnaces matched to a full load calculation of your actual home, not the nominal tonnage of the old unit.
Gas Furnace Replacements
A gas furnace replacement in Bellevue means checking the flue, the gas line, the condensate drain, and the ductwork before we set the new unit. In older Eastgate and Lake Hills homes, we frequently find undersized return ducts that choke airflow and shorten the life of a new heat exchanger.
Electric to Gas Conversions
Some Bellevue homes still heat entirely with electric resistance. Converting to a gas furnace or a heat pump changes the monthly utility math dramatically, and we handle the electrical, gas, and venting work as one coordinated job with one written price.
HVAC Installation in Bellevue
HVAC Installation in Bellevue usually means a full heating and cooling upgrade rather than a single appliance swap, and the price range of $3,500 to $7,500 covers most standard jobs. The exact number depends on the size of the home, whether ductwork exists, and which equipment you choose. What should not vary is whether the installer runs a load calculation and gives you a written price first. We do both on every job.
Heat Pump Retrofits
Given Bellevue’s damp winters and Puget Sound Energy rebate programs, heat pumps are now the most common full-system install we do. Cold-climate heat pumps operate efficiently even on the coldest Eastside nights, because our marine-influenced temperatures stay well within their effective operating range.
Ductless Mini-Split Systems
For Bellevue homes with no existing ductwork, ductless mini-splits avoid the cost and disruption of cutting into ceilings and walls. They are especially popular in the older ranch homes of Lake Hills, where adding central ducts would require major structural work.
Trusted Brands We Service in Bellevue
We install and service Rheem, York, Daikin, and Bryant equipment, along with five other major brands, and we carry the parts Bellevue homes need most often: corrosion-resistant condenser coils, marine-rated cabinets, and cold-climate heat pump components. Because our techs work the Eastside every day, we can often pull a part the same day a repair is diagnosed. We do not push one brand across every house. We match the equipment to the home’s exposure to Puget Sound air, the ductwork, and the family’s heating and cooling habits.
Common AC Installation Problems We See in Bellevue Homes
- Oversized systems that short-cycle. Sizing a new unit off the old one’s nominal tonnage instead of running a full load calculation is the most expensive mistake we see in Bellevue. An oversized system never dehumidifies the damp shoulder-season air, and it stresses the compressor with constant on-off cycling.
- Standard condenser coils failing early near the Sound. Salt-laden air pits and corrodes standard coils far faster than inland systems. In Bellevue, skipping the coated-coil upgrade usually means a repeat service ticket years before the system should need one.
- Poor static pressure in retrofitted ductwork. In 1960s and 1970s Lake Hills and Eastgate split-levels, rushed duct retrofits often leave the system starved for airflow. That drops real SEER2 performance, shortens heat exchanger life, and leaves rooms unevenly heated or cooled.
- Ignoring the baseboard-to-ducted transition. Homeowners sometimes assume an AC install is a one-day job when they still have electric baseboard heat. Without existing ductwork, a proper install takes multiple days and costs two to three times a standard furnace swap. We price that honestly before any work starts.
Pricing for AC Installation in Bellevue, WA
Here are the price ranges our Bellevue customers see most often:
| Service | Typical Bellevue Range |
|---|---|
| AC Installation (ducted heat pump or central system, standard install) | $3,500-$7,500 |
| Furnace Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
| AC Repair | $150-$650 |
What moves a Bellevue install toward the top of that range? Homes with no existing ductwork, older electrical panels that need upgrading, two-story layouts with difficult access, and the coated-coil and corrosion-resistant cabinet upgrades we recommend near the Sound. What moves it down? Straightforward replacements in newer homes with existing ductwork and accessible mechanical space. Every quote is written, fixed, and given before any work starts. For an exact number on your home, call (747) 966-3037. Estimates are free.
We Also Serve Cities Near Bellevue
Our crews work across the Eastside, including Medina, Mercer Island, Kirkland, and Redmond. If you live near the Bellevue border, the same AC Installation standards apply: written pricing, background-checked techs, shoe covers and drop cloths, and the 365-Day Done Right Promise. Call (747) 966-3037 to schedule an estimate.
Serving Bellevue, WA - Our Local Coverage Area
We’re based in the Bellevue area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Bellevue
Yes, in most Bellevue homes near Puget Sound, a factory-coated condenser coil is worth the premium. The marine air here carries salt and nearly year-round damp into outdoor cabinets, and standard coils pit and corrode years before they do in Sammamish or Issaquah. A corrosion-resistant coil can extend the service life of your condenser substantially. Call (747) 966-3037 and we will tell you if your specific location warrants the upgrade.
For a home with no ducts, an AC install means either adding ductwork throughout the house or installing a ductless mini-split system. Adding ducts to a 1960s Lake Hills split-level often means running new duct runs through finished ceilings and a cramped crawlspace, which takes multiple days and costs more than a simple furnace swap. A ductless system avoids that work entirely and cools room by room. We will give you written prices for both options before you decide.
Tonnage matters because an oversized system short-cycles, never dehumidifies Bellevue’s damp shoulder-season air, and stresses the compressor against the coast’s salt-heavy conditions. We run a full load calculation on every install rather than copying the old unit’s nominal tonnage, which is the only way to get real efficiency and comfort from your system.
Yes. In Bellevue, we recommend checking the condenser coil and cabinet at least twice a year for salt buildup and early corrosion, rather than the standard annual tune-up. A tune-up run is $80 to $200, and it is the cheapest way to catch pitting before it forces an early coil replacement.
Yes. Bellevue’s marine west coast climate keeps winter temperatures within the efficient operating range of modern cold-climate heat pumps, even during the coldest Eastside nights. These systems are designed for exactly this kind of damp, mild winter, and they also provide cooling during Bellevue’s increasingly hot summer months. Call (747) 966-3037 for a written quote on your home.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Bellevue and the Eastside with the Cedarwell Care Promise.