Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Beverly Hills
If you’re weighing a new air conditioning system in Beverly Hills, the honest price range is $3,500 to $7,500 for a properly sized and permitted installation, and the work usually takes one to three days depending on zones and ductwork. We know Beverly Hills well: the Flats south of Santa Monica Boulevard, the hillside estates north of Sunset, the guest houses and pool structures that need their own climate zones. When you call (747) 966-3037, you’ll reach a live person who can talk through your house, your permits, and your options without a script.
Why Meadowsweet Heating & Air Is Beverly Hills’s Preferred AC Installation Company
Luis Serrano leads our Beverly Hills installation work, and he’s the one homeowners talk to when a job gets complicated, which, in this city, is often. Beverly Hills runs its own municipal building and safety department. That means your project is judged by Beverly Hills inspectors, not LA City or LA County, and their standards on exterior noise, equipment placement, and enclosures are stricter than anything a mile away. Contractors who do fine on the Westside get caught flat-footed here. We don’t, because we plan for Beverly Hills rules from the first site visit.
Our crews are background-checked, uniformed, and trained on the C.A.R.E. values: clean up like it’s their own home, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. We put shoe covers and drop cloths down on every job, and we send you a photo of the clean-up before we leave. That’s not an upsell. It’s how every Meadowsweet job ends.
Central Air Conditioning Installation in Beverly Hills
Central air conditioning installation in Beverly Hills normally means matching a new condensing unit and air handler to an existing duct system, or replacing that ductwork when it’s too small, too leaky, or too shallow for modern airflow requirements. A typical central system here runs $3,500 to $7,500, with larger estates, multi-zone setups, and hillside homes north of Sunset toward the higher end because the labor is genuinely harder: irregular rooflines, limited mechanical room space, and Beverly Hills’s own noise-enforcement rules that can require sound-attenuation enclosures on equipment a block away in West Hollywood would never need.
Load calculation and zone design
We size every system with a room-by-room load calculation, not a rule of thumb. The Santa Monica Mountains funnel Santa Ana wind into the hillside neighborhoods north of Sunset, regularly pushing temperatures 8 to 12 degrees hotter than the Flats a mile south. A unit sized for a flat, marine-moderated address will undercool a canyon-adjacent property all summer. We measure, we calculate, and we show you the numbers before we propose equipment.
Concealed equipment and historic architecture
Many Beverly Hills homes, especially the 1920s through 1940s Spanish Colonial Revival, Tudor, and Georgian Revival estates in the Flats, have architectural details that make exposed equipment unsuitable. We route ducting through existing chases, closets, and soffits where possible, place condensers where they’re sheltered and code-compliant, and verify static pressure and refrigerant charge at every zone before calling for inspection.
Furnace Installation in Beverly Hills
Furnace installation in Beverly Hills usually pairs with cooling work, because the same estate that needs a properly zoned AC system also needs consistent heat in winter, particularly in the single-wall and stucco construction built before 1960 that loses heat fast on cold nights. A furnace-only install runs $3,500 to $7,500 for most homes, depending on access and whether we’re adding filtration, zoning, or sealing ducts. Many Beverly Hills homeowners replace both systems at once, partly for efficiency and partly to avoid a second permit cycle through the city’s building and safety department.
Dual-fuel and heat pump pairings
We regularly design dual-fuel systems for Beverly Hills: an efficient heat pump for the shoulder seasons paired with a gas furnace for the handful of genuinely cold nights. Given the city’s own permitting rules and its separate inspection path, we handle both permits as one coordinated scope of work, including any separate pull required for a guest house or pool structure on the same lot.
Filtration and humidity control
The larger and tighter a Beverly Hills home is, the more indoor air quality matters. We check static pressure on every furnace and air handler we install, because a high-MERV filter on an undersized duct will quietly choke airflow, raise energy bills, and shorten equipment life. On estates where kids, pets, and art collections share the air, we configure filtration and humidity control that works with the system’s actual airflow, not against it.
Trusted Brands We Service in Beverly Hills
We install and service equipment from Rheem, York, Daikin, and Bryant, among others, and we stock common parts to keep Beverly Hills jobs moving instead of waiting on a supply house across town. That matters on a multi-unit estate where losing cooling on a Saturday in August means something different if you have kids home from school and a house full of guests. Our technicians work across nine brands daily, so a repair call doesn’t stall because the nameplate isn’t familiar. The AC Installation team can explain which brand and configuration makes sense for your specific home, your specific noise limits, and your specific permit path.
Common AC Installation Problems We See in Beverly Hills Homes
- Equipment sized off a rule of thumb. A hillside home north of Sunset that runs 8 to 12 degrees hotter than an address in the Flats a mile away needs real load math, not a rough guess. When a unit is oversized or undersized, one wing of the house stays chronically undercooled all summer, and the homeowner has no idea why.
- Condenser placements copied from LA City jobs. Beverly Hills’s own inspectors enforce local exterior noise limits on condensing units and air handlers, and they routinely reject placements or demand sound-attenuation enclosures that LA City or LA County would pass without a second look. We design for Beverly Hills from the start, because a mid-project redesign is expensive and avoidable.
- Multi-zone systems commissioned on paper only. A large estate with a guest house needs balancing of static pressure and verification of refrigerant charge at every zone. If nobody checked, the system looks finished but underperforms in the rooms that matter most, and that failure often doesn’t surface until the first heat wave.
- Historic soffits and shallow chases. The 1920s and 1930s Spanish Colonial, Tudor, and Georgian Revival homes in the Flats have almost no chase space for modern ducting. On a 1930s estate off South Bedford Drive, we replaced two aging split systems with a Carrier multi-zone setup and paired a Daikin mini split in the detached guest house with its own permit pull. Because the original plaster soffits offered so little room, we ran concealed ducting and verified static pressure and refrigerant charge at every zone before calling for Beverly Hills’s own inspection, which approved the side-yard condenser only after we added a sound-attenuation enclosure to satisfy the city’s noise limits.
Pricing for AC Installation in Beverly Hills, CA
Here’s the straightforward answer for Beverly Hills: a complete AC installation runs $3,500 to $7,500 across the city. What moves a job within that range is the house itself. A compact single-zone installation in the Flats lands toward the lower end. A multi-zone system for a hillside estate north of Sunset, with a guest house, separate permit pulls, and a sound-attenuation enclosure to satisfy Beverly Hills noise rules, lands toward the higher end. The written price is always provided before any work starts, on every visit, every time, and it’s backed by the 365-Day Done Right Promise.
| Service | Beverly Hills Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| AC Repair | $150 - $650 |
| Furnace Repair | $150 - $700 |
| Tune-Up | $80 - $200 |
Call (747) 966-3037 for a free estimate. You’ll get the exact number before we ask you to commit to anything.
We Also Serve Cities Near Beverly Hills
While this page is written for Beverly Hills, our crews also serve West Hollywood, Culver City, Santa Monica, and Marina del Rey. The permitting rules change at the city line, and we plan separately for each jurisdiction, because a Beverly Hills-approved condenser placement is not automatically a West Hollywood-approved one.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Beverly Hills
Beverly Hills operates its own municipal building and safety department, completely separate from LA City and LA County, so the same condenser placement can pass in West Hollywood and get flagged in Beverly Hills. If your job site is one block from a West Hollywood or Century City address, it still follows Beverly Hills’s own permit, inspection, and exterior-noise rules. We handle that path as part of the installation, and we set expectations before work starts.
Often, yes. Many Beverly Hills lots include a detached guest house or pool structure, and those separate structures typically require their own permit pulls even though the main house is being cooled by the same project. We identify that early, so you’re not surprised by a second inspection or a second set of fees after the work begins. Call (747) 966-3037 and we can look at your specific property layout before you commit to anything.
Because the Santa Monica Mountains funnel Santa Ana winds directly into the hillside neighborhoods north of Sunset, pushing temperatures 8 to 12 degrees hotter than the Flats a mile south, which benefit from stronger marine-layer moderation on summer mornings. That is a real difference in peak cooling load, and it means a unit sized for one address will underperform at the other. We run a room-by-room load calculation on every job, specifically because those two-thirds of a city are not thermally identical.
Yes. Beverly Hills’s own inspectors enforce local exterior noise limits on condensing units and air handlers, and they routinely require sound-attenuation enclosures or different placements that LA City would pass without comment. A quiet unit is not automatically a code-compliant unit in this city. We design for Beverly Hills noise rules from the start, because the alternative is a redesign and enclosure mid-project, which costs money and delays your cooling.
We verify it before we call for inspection. On multi-zone installs, particularly larger estates with a guest house, we balance static pressure and check refrigerant charge at every zone, not just at the condensing unit. That’s how we know the upstairs wing and the detached guest house are both actually receiving the airflow and cooling the design says they should. We also provide a photo of the clean-up before the crew leaves, on every job.
Call Meadowsweet Heating & Air for AC Installation in Beverly Hills
If you’re ready to replace an aging system, add cooling to a home without it, or fix a multi-zone mess that never worked right, call (747) 966-3037. You’ll reach a live person, day or night, and we’ll schedule a time that respects your family’s quiet hours. We’ll walk through your house, your permit situation, and your equipment options, and you’ll get a written price before any work starts. Backed by the 365-Day Done Right Promise: if it’s not done right, we make it right.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Beverly Hills since the company’s founding in 2004.