Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Houston
AC installation in Houston runs $3,500 to $7,500 for a standard split system, and the number that matters more than the sticker is whether the equipment is sized for this city’s Gulf-fed humidity, not just its heat. A new system specified for Dallas or Phoenix will leave a Houston house at 75°F and still clammy, because it never runs long enough to wring moisture out of the air. Our crews work from the brand’s Houston office, so we know the difference. We reach neighborhoods from Katy to Galena Park with a written price before any work starts. Call (747) 966-3037 for a free estimate.
Why Meadowsweet Heating & Air Is Houston’s Preferred AC Installation Company
Houston homeowners keep calling us back because our crews act like guests in the house. Shoe covers go on at the door, drop cloths go down before a ladder touches the floor, and we send a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it’s printed on every job we do. Families with kids and pets notice the difference in the first ten minutes.
Luis Serrano leads our Houston team, and he’s built the operation around one rule: explain the price before the work. Background-checked, uniformed technicians follow the C.A.R.E. values code on every visit – Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work starts. If it’s not done right, the 365-Day Done Right Promise means we make it right. No runarounds, no fine print.
We service nine equipment brands – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard – which means we don’t steer you toward one manufacturer. We steer you toward the system that handles Houston’s latent load. Our proximity to neighborhoods like Clear Lake, Meyerland, and The Heights means same-week scheduling is the norm, not the exception. A live person answers our phone 24/7, including nights and weekends.
Furnace Installation in Houston
Furnace installation in Houston usually pairs with a heat pump upgrade, and it costs $3,500 to $7,500 as a dual-fuel system. After February 2021’s Winter Storm Uri, thousands of Houston homeowners saw standard heat pumps fail to hold safe indoor temperatures. A gas furnace paired with a cold-climate-rated heat pump gives you the efficiency of electric heat in shoulder seasons and the brute warmth of gas when a hard freeze hits.
Dual-Fuel Retrofit Work
A dual-fuel install means the heat pump carries the load when Houston’s outside air is above freezing, then the gas furnace takes over during a Uri-style cold snap. We run a fresh load calculation – not a rule-of-thumb tonnage guess – because the furnace and heat pump have to share the same ductwork and blower. Homes in Pearland and Sugar Land with slab-on-grade construction and attic ductwork need the static pressure verified before we quote, so the airflow works for both fuel sources.
Attic Ductwork and Charge Verification
Houston attics hit 140 to 160°F in summer, so ductwork leaks and poor insulation bleed cooling capacity before it reaches your vents. We inspect duct runs and re-seal what needs it during a furnace install, then dial in the refrigerant charge against the actual load. That step is what separates a system that works on paper from a system that holds 48% indoor relative humidity at 75°F on a muggy August afternoon.
HVAC Installation in Houston
HVAC installation in Houston means specifying equipment for moisture removal first, temperature second. Dew points here regularly hit 75 to 78°F in summer – among the highest in the continental U.S. – so an oversized system short-cycles and leaves the evaporator coil no time to condense water out of the air. The result is a house that reads 75°F on the thermostat but feels like a locker room.
Load Calculation and Tonnage Selection
We never sell tonnage based on square footage alone. A load calculation for a Katy home accounts for window orientation, attic insulation depth, duct leakage, and the latent load from Houston humidity. Oversized tonnage is the most common mistake we see from other installs – it cools the air fast, satisfies the thermostat, and stops before dehumidifying anything. We size systems to run longer, quieter, and wetter in the right way.
Coated Coil and Corrosion-Resistant Specs
Homes within a mile of the ship channel or Galveston Bay get salt-laden air that pits standard condenser coils in five to seven years. For those jobs – and honestly for most of Houston – we recommend coated-coil cabinets and corrosion-resistant fasteners. The upfront premium is modest, and it keeps a new system from looking like a rusted boat anchor before the compressor’s first decade is up.
Trusted Brands We Service in Houston
Meadowsweet Heating & Air services and installs nine leading equipment brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Houston’s humidity and salt exposure, we often specify Rheem and York for their coated-coil options, and Bryant for dual-fuel furnace and heat pump pairings that handled Uri better than standard equipment. Daikin is a solid choice for homeowners who want a side-discharge heat pump that fits tight lot lines in older neighborhoods. Parts are stocked locally, which shortens repair and install timelines across the metro.
Common AC Installation Problems We See in Houston Homes
- Salt-pitted condenser coils near the coast. Homes in Clear Lake, Seabrook, and along the ship channel corridor show coil corrosion years ahead of inland Houston. We replace these with coated-coil units and recommend rinsing the cabinet twice a season if you’re within a mile of brackish water.
- Oversized tonnage sold on temperature alone. An old rule-of-thumb install might put 4 tons where a load calculation says 3. The bigger system short-cycles, leaves indoor humidity at 60% plus, and drives up energy bills while feeling sticky.
- Attic ductwork turning a 68°F supply into a 75°F supply. Ducts running through 150°F attics lose cooling before it reaches your vents. We re-seal and, where needed, add insulation to keep supply air cold enough to actually condense moisture on the coil.
- Dual-fuel retrofits without a static pressure check. Adding a furnace to a heat pump system changes airflow. If the blower can’t handle the added resistance, the system freezes up or throws error codes. We verify static pressure before quoting, not after the install fails.
Pricing for AC Installation in Houston, TX
A typical AC Installation in Houston runs $3,500 to $7,500 depending on equipment efficiency, whether it’s a heat pump or straight cool, and how much ductwork needs re-sealing. Here’s what you’re looking at for the work we commonly do around the metro:
| Service | Houston Price Range |
|---|---|
| AC Installation (standard split system) | $3,500 - $7,500 |
| Furnace Installation (dual-fuel upgrade) | $3,500 - $7,500 |
| AC Repair (capacitor, refrigerant charge) | $150 - $650 |
| Tune-Up (coil rinse, capacitor test, thermostat calibration) | $80 - $200 |
The single biggest price driver is whether the system is sized correctly for Houston’s latent load. A load calculation, coated-coil spec, and proper duct sealing add a few hundred dollars to the quote and prevent a system that feels wrong from day one. We give a written price before any work starts, and estimates are free. Call (747) 966-3037 and we’ll walk you through the numbers for your house.
We Also Serve Cities Near Houston
Beyond Houston proper, our crews serve Galena Park, Pasadena, Channelview, and South Houston – all with the same written-price guarantee and Cedarwell Care Promise. Whether you’re in a 1970s slab-on-grade rancher in Pasadena or a newer build in South Houston, you can reach us through our Houston office for scheduling and service.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Houston
Houston installs cost more because the equipment has to work harder against humidity and salt air. A standard split system in Dallas might never need a coated coil, but Houston homes near the bay or ship channel do. Add the labor involved in re-sealing attic ductwork that runs through 150°F attics, and a Houston install legitimately includes work a Phoenix installer never touches. Expect $3,500 to $7,500 for a properly specified system, and call (747) 966-3037 for a line-item quote on your exact house.
Salt-laden air from Galveston Bay and the ship channel pits bare aluminum condenser fins within five to seven years, especially within a mile of the water. The corrosion gets into the copper tube joints and eventually leaks refrigerant. Coated-coil cabinets and corrosion-resistant fasteners delay that failure by years, and they’re worth the premium for any Houston home within a few miles of brackish air.
Twice a year – once before the March-to-November cooling season and once after. Houston’s season runs long, so a spring tune-up in February catches capacitor wear and low refrigerant before the first 95°F day, and a fall visit checks for coil corrosion and drain-line algae. Our tune-ups run $80 to $200 and include a coil rinse, capacitor test, and thermostat calibration. Call (747) 966-3037 to schedule either visit.
Yes, if you’re replacing a heat pump and don’t want a repeat of Uri. Cold-climate-rated heat pumps hold efficiency down to much lower outdoor temperatures than standard units. Pair one with a gas furnace and you have a dual-fuel system that handles both Houston’s swampy summers and the next hard freeze. We’ve been installing these dual-fuel setups steadily since 2021, and the furnace side adds $3,500 to $7,500 to the project depending on capacity.
SEER2 matters, but it’s the wrong number to lead with in Houston. A high SEER2 rating measures cooling efficiency, not dehumidification. A 17 SEER2 system that’s oversized will still leave a home sticky. Shop on three specs: correct tonnage from a load calculation, a coated coil for salt resistance, and a blower that handles the static pressure of your ductwork. We’ll help you compare these across Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
For a free estimate on AC installation in Houston, call (747) 966-3037. Luis Serrano and the Meadowsweet Heating & Air team will give you a written price, a straight answer on sizing, and a system that finally gets the humidity out of your house.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, coordinating installs and service across Houston from the brand’s Houston office.