Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Kenmore
AC installation in Kenmore, WA typically costs $3,500 to $7,500 for a complete system, with cold-climate heat pump options landing at the higher end because they must handle the river-valley cold that settles here on clear winter nights. We know this market: the SR-522 corridor, the split-levels on hillsides west of 68th Ave, the older ranch homes along the Sammamish River. At Meadowsweet Heating & Air, our AC Installation team serves Kenmore with a written price before any work starts and a 365-Day Done Right Promise behind every job. Call (747) 966-3037 for a free estimate, answered by a live person any hour.
Why Meadowsweet Heating & Air Is Kenmore’s Preferred AC Installation Company
Kenmore homeowners keep calling us back for one reason: the crew treats the house like a place where kids sleep and dogs nap on the floor. We don’t just swap equipment. We protect the entryway with drop cloths, put shoe covers on before stepping inside, and send a photo of the clean-up before the crew leaves. That’s the Cedarwell Care Promise, and it’s included on every single job, not offered as an add-on.
Our technicians are background-checked, uniformed, and trained to follow the C.A.R.E. values on every visit: Clean up like it’s their own home, Ask before moving anything, Respect your family’s time and quiet hours, and Explain the price before the work. Luis Serrano leads our Kenmore installs with the same standard he’d want in his own home. When you call, you’ll reach a person, not a voicemail queue, and you’ll get a straight answer about what your system needs and what it costs.
HVAC Installation in Kenmore
HVAC Installation in Kenmore comes with a set of realities most other markets don’t face. Because much of the city was built out as unincorporated King County suburb between the 1960s and early 1980s, original systems were often permitted under looser county oversight. That means our techs regularly find undersized ductwork and electrical panels that predate anything close to modern code. A new system here often means correcting those foundations, not just setting a condenser on a pad.
Ducted Central Air Retrofit
For the ranch and split-level homes common off 68th Ave and around Moorlands Park, we often can reuse existing duct runs after a static pressure test. If the ducts are undersized, we’ll write that into the proposal as a line item with a dollar amount. No vague allowances. You’ll see exactly what the blower is pushing against before we ever order equipment.
Panel and Electrical Audit
Any HVAC installation in Kenmore that moves from electric baseboard to a heat pump or central air should include a panel audit. The original baseboard circuits were never sized for a modern compressor’s startup draw. If your panel is the original 100-amp service on a 1960s home, we’ll tell you before the quote is final, not after the breaker trips for the third time.
Heat Pump Installation in Kenmore
Heat Pump Installation in Kenmore is less about cooling and more about keeping the house warm through a valley winter. Cold air drains off the hillsides and pools near the Sammamish River and the north end of Lake Washington, pushing overnight lows below what Bothell or Kirkland record on the same nights. For that reason, most Kenmore homes need a cold-climate heat pump, sometimes called hyper-heat, that continues delivering real heat output well below freezing. A standard heat pump sizing chart from a Seattle sales sheet won’t clear that bar.
Cold-Climate Sizing for River-Valley Homes
We run a full heating load calculation using your home’s specific construction and location, not a rule-of-thumb square-footage estimate. Homes along NE 175th St and down toward the river tend to run colder than those a few blocks uphill. That’s the reality of cold-air pooling, and it changes the equipment choice.
Ductless Mini-Split Options
If your 1970s rambler has no existing ductwork and you’d rather not open walls, ductless mini-splits can handle the heating load and deliver efficient cooling during Kenmore’s brief summer warm spell. We install these with lineset covers and clean outdoor penetrations, and we’ll show you the supported performance at 5°F before you commit.
Trusted Brands We Service in Kenmore
Meadowsweet Heating & Air services equipment from nine major brands, and for Kenmore we keep common parts for Goodman, Rheem, and Daikin systems on our local trucks. If you’ve got a Rheem condenser that’s past its useful life or a Goodman air handler that never quite heated the back bedrooms, we can quote a direct replacement with the same brand or a more efficient cross-brand swap. York and Carrier options are available as well. The goal is a system that matches your home’s heating load, not a brand loyalty test.
Common AC Installation Problems We See in Kenmore Homes
- Flooded condensers from river-valley inundation. Homes near the Sammamish River and the northern shoreline of Lake Washington occasionally see standing water around the outdoor unit after heavy rain events. A water-logged condenser that’s switched back on before drying can short the capacitor and damage the compressor. We inspect and dry the electronics before any restart.
- Storm surge damage to capacitors and blower motors. October through March storms roll down the SR-522 corridor and knock out power. Units without a surge protector often lose a capacitor or blower motor when the grid comes back. We can install a surge device on any new system, sized for the specific unit.
- Undersized electrical panels on original baseboard-wired homes. Split-levels built in the 1960s and 1970s along the corridor often still have the original electric baseboard circuit feeding the HVAC area. That circuit was never designed for a heat pump compressor’s startup draw. The panel audit is not an upsell, it’s the difference between a system that runs and a breaker that trips at 3 a.m.
- Non-code-compliant ductwork from 1960s-80s county permits. Original installs from before Kenmore incorporated in 1997 frequently have duct runs that are too small, poorly sealed, or both. High static pressure on a new system pushes the blower past its design range and shortens the equipment’s life. We test and correct this before commissioning.
Pricing for AC Installation in Kenmore, WA
Here’s what families in Kenmore should plan for:
| Service | Kenmore Price Range |
|---|---|
| AC Installation | $3,500-$7,500 |
| AC Repair | $150-$650 |
| Tune-Up | $80-$200 |
The exact number depends on your home’s heating load, panel condition, and whether you choose ducted or ductless equipment. Heat pump installations that include a cold-climate condenser and a panel upgrade land at the top of the range. Every quote is a written fixed price before any work starts, so you’ll never get a surprise line item after the fact. Call (747) 966-3037 for an exact quote – estimates are free.
We Also Serve Cities Near Kenmore
Our AC installation crews serve Kenmore and the surrounding communities of Bothell, Mountlake Terrace, Lynnwood, and Woodinville. If you’re in Kenmore or a neighboring city, the same written price and clean-up standard applies. A live person answers the phone day or night at (747) 966-3037.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Kenmore
Because so many Kenmore homes were built in the 1960s through early 1980s with electric baseboard heat, the original circuits were never designed for a modern heat pump or central air compressor’s startup draw. We audit the panel to verify it can safely handle the new equipment before installation. If it can’t, we’ll quote the upgrade as a separate line item with a fixed price. Call (747) 966-3037 to have your panel checked as part of a free estimate.
Turn the system off at the breaker or thermostat and do not switch it back on until a technician has inspected it. Water inside the condenser can short the capacitor and damage the compressor. We’ll dry the electronics, test the compressor windings, and only restart the unit when it’s safe. If you’re near the Sammamish River or the north shore and your unit sat in standing water, call us first.
Install a dedicated surge protector at the disconnect and, if you regularly lose power during October through March storms, consider a generator transfer switch or a battery-backed start. The simplest and least expensive protection is a HVAC-rated surge device installed at the outdoor unit. We include this as a line-item option on every new installation quote in Kenmore.
Yes. Homes in the lower Sammamish River valley regularly see overnight lows several degrees below Bothell or Kirkland on the same nights. That means you need a cold-climate heat pump, often called hyper-heat, that delivers full rated output down to 5°F or lower. A standard heat pump will struggle and switch to expensive resistance backup more often. We’ll show you the performance data at 5°F for the unit we quote, so you know exactly what you’re buying for a Kenmore winter.
For most Kenmore homes, a SEER2 rating between 15 and 18 strikes the right balance for our climate. Because heating dominates and cooling demand is limited to a handful of weeks in July and August, chasing a 20+ SEER2 ultra-high-efficiency unit often doesn’t pay back in a marketplace where the cooling season is short. We’ll show you the projected operating cost for each option before you decide. Call (747) 966-3037 for a free estimate and we’ll walk through the numbers with you.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Kenmore since 2004.