Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable AC Installation Across League City
New AC installation in League City typically runs $3,500-$7,500 for a standard split system, and most jobs take one full day once equipment arrives. If you’re calling from South Shore Harbour, Tuscan Lakes, or anywhere along FM 518, we can usually have a Comfort Advisor at your door within 48 hours to measure, price, and schedule. Call (747) 966-3037 for a written quote before any work begins.
We know League City homes because we work on them every week. The salt air off Galveston Bay, the attic heat, the slab foundations, the 18-to-25-year-old R-22 systems reaching end of life in whole subdivisions at once. This page will walk you through what a new system should cost here, what actually matters for coastal equipment, and how to avoid the sizing mistakes that leave Bay Area homes feeling damp at 72 degrees.
Why Meadowsweet Heating & Air Is League City’s Preferred AC Installation Company
Meadowsweet Heating & Air is an independently owned location within the Cedarwell family of HVAC companies, founded in 2004 and built around one promise: a written price before any work starts, shoe covers and drop cloths inside your home, and a photo of the clean-up before our crew leaves. That’s the Cedarwell Care Promise, and it applies to every installation we do in League City, no exceptions.
Our technicians follow a code called C.A.R.E.: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. For League City families with kids and pets, that means drop cloths over the hallway carpet where the crew walks, shoe covers on from the front door to the attic access, and no loud tear-out during nap hours if we can help it.
Luis Serrano leads our installation team, and he trains every tech who enters a League City home. We’re part of the Cedarwell family of HVAC companies, which means we carry parts and support for nine major equipment brands and answer the phone with a live person 24 hours a day, seven days a week, including holidays. Not a voicemail queue. A person.
Furnace Installation in League City
Furnace installation in League City means pairing a new gas furnace or heat-pump air handler with an AC coil and condenser that can handle our humidity and our salt air. Most League City homeowners we talk to are replacing a 20-year-old R-22 system where the furnace and AC failed together, or are upgrading before the next coastal freeze. A furnace paired with a new AC installation runs the same $3,500-$7,500 range as a standalone AC system, because the labor and ductwork scope overlap.
What we actually do on a furnace installation here: run a room-by-room load calculation on your square footage and window orientation, check the attic duct layout for kinks and air leaks, then size the furnace and coil as a matched pair. In League City’s high-humidity climate, a furnace and AC that aren’t matched can deliver uneven temperatures between the east and west sides of a two-story home.
What happens to the old furnace and coil
We haul away the old equipment, including the attic air handler and the outdoor condenser, and we don’t leave packaging or loose refrigerant lines on your lawn. If your old system still has R-22 in it, we recover it into sealed cylinders, never vent it.
Choosing a furnace for League City winters
League City’s freeze risk is real, as February 2021 showed. We recommend a furnace with an ECM blower motor, which costs a bit more upfront but runs quieter and draws less power during our long cooling season.
HVAC Installation in League City
HVAC installation in League City means replacing the entire comfort system, not just one component: the outdoor condenser, the indoor evaporator coil, the furnace or air handler, and usually the thermostat. For most League City homes built between the late 1980s and mid-2000s, the full system is reaching the 18-to-25-year mark at the same time, which is why we see whole streets in Westover Park and Tuscan Lakes replacing equipment within a few years of each other.
A full HVAC installation here runs $3,500-$7,500 for standard equipment, with the final number driven by system size, efficiency rating, ductwork condition, and whether you add marine-grade coil coating. We give you a written price before we start, with every line item in dollars, and we don’t change it mid-job.
What the crew does inside your League City home
Before any work begins, the lead tech walks the house with a shoe-cover and drop-cloth protocol. Attic access, hallway paths, and the area around your indoor unit all get protected before tools come out. After the install, we send you a photo of the clean-up, including the attic deck and the garage floor.
Why the attic matters more than the condenser
In League City, attic temperatures routinely hit 130-150°F in July and August. That’s where your air handler and blower motor live. We seal the return-side ductwork, check static pressure, and set airflow to match the new coil, because poor attic ductwork is the most common reason a brand-new system underperforms in this part of the Bay Area.
Trusted Brands We Service in League City
Our AC Installation team works on Rheem, York, Daikin, and Bryant equipment, along with five other major brands. For League City specifically, we pay attention to which brands offer factory corrosion-resistant coil options and salt-resistant cabinet finishes. Rheem and Carrier both make coastal-tier condenser lines that hold up better near Galveston Bay, and we can order those configurations for League City customers without a long delay. AC Installation in League City should include a conversation about which compressor warranty and coil warranty actually cover coastal corrosion, because not every brand’s fine print does.
Common AC Installation Problems We See in League City Homes
- Condenser coil corrosion from salt air: Homes within a few miles of Galveston Bay, especially in South Shore Harbour and along the bay side of FM 2094, show coil fin corrosion within 5-7 years on uncoated condensers. That leads to refrigerant leaks, and eventually compressor failure. Marine-grade coatings aren’t an upsell here. They’re the difference between a 10-year system and a 6-year one.
- Oversized systems that short-cycle: League City’s summer dew points stay above 75°F for weeks at a time. An oversized AC drops the temperature quickly but never runs long enough to pull moisture out of the air. The house hits 72°F and still feels clammy, and some families end up running a dehumidifier next to a brand-new AC because the load calculation was skipped.
- Attic air handlers failing early in 150°F heat: Blower motor capacitors and circuit boards wear faster when the attic stays above 130°F all summer. We check the attic ventilation and the duct insulation at the same time, because a hot attic shortens the life of the best-installed system.
- Original R-22 systems reaching end of life in clusters: The build wave along FM 518 and Bay Area Boulevard from the mid-1990s to 2005 means whole neighborhoods in League City are aging out of R-22 at roughly the same time. If your neighbors have already replaced theirs, there’s a good chance your condenser is on the same schedule.
Pricing for AC Installation in League City, TX
Here’s what we quote families in League City for new equipment, installed with the Cedarwell Care Promise and a written price before work begins:
| Service | Typical Price Range |
|---|---|
| AC Installation (standard split system) | $3,500-$7,500 |
| Furnace Installation (with AC) | $3,500-$7,500 |
| AC Repair | $150-$650 |
| Tune-Up | $80-$200 |
What moves your number within that range: system tonnage, SEER2 rating, whether you add a coated coil, and whether your ductwork needs sealing or modification. A 2-ton system for a smaller single-story home sits at the lower end. A 5-ton system with a high-efficiency heat pump, a variable-speed air handler, and ductwork upgrades sits at the upper end. We give you a line-item quote, and the estimate is free. Call (747) 966-3037 and we’ll send someone to measure.
We Also Serve Cities Near League City
Meadowsweet Heating & Air serves League City and the surrounding Bay Area communities, including Webster, Kemah, Dickinson, and Friendswood. Our scheduling and dispatch are coordinated from the brand’s Houston office, with local crews serving League City directly. If you’re in a neighboring town and need honest AC installation pricing, call us and we’ll tell you what it costs to your zip code.
Serving League City, TX - Our Local Coverage Area
We’re based in the League City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in League City
Every 6-8 months, not annually. Salt-laden coastal air near Galveston Bay accelerates corrosion on condenser coils, electrical contacts, and copper lines, so a twice-annual March and September visit catches degradation before it causes a leak or a failed capacitor. Call (747) 966-3037 and we’ll put you on a salt-focused maintenance schedule for your specific equipment.
If your home is within a few miles of the bay, yes, it’s the better call. We installed a 4-ton Carrier system with a coated condenser coil in South Shore Harbour for a homeowner whose 2001 R-22 unit had a rusted-out cabinet and a failed capacitor. Our tech ran a load calculation to confirm tonnage, sealed the attic ducts to manage static pressure, and set the refrigerant charge on the new heat pump. The homeowner noticed immediate humidity control and a quieter blower motor, and we scheduled the first salt-focused maintenance visit just six months out.
That’s almost always an oversized system that short-cycles. In League City’s high-dew-point climate, an AC needs long run-times to remove moisture from the air, not just drop temperature. If the unit satisfies the thermostat in 8 minutes instead of 20, it never strips the latent humidity load, and the house stays damp and cool-sticky. We run a manual load calculation on every installation so the system is sized for moisture removal, not just cooling.
Look for 15.2 SEER2 or higher for a good balance of upfront cost and summer electricity bills. Houston-area electricity rates climb each summer, and a system that runs 10 hours a day for six months straight pays back a higher efficiency rating pretty quickly. We’ll show you the operating cost difference between a 14.3 SEER2 and a 17 SEER2 system in writing, in dollars, before you choose.
Most full-system installations take one full working day, from drop cloths down to final clean-up, assuming the job is a straightforward no-ductwork replacement. The process is: measure and load calculation, written quote, equipment order, install day, then a walkthrough and a photo of the clean-up. We answer calls live at (747) 966-3037 if you want to start with a free estimate.
Call Meadowsweet Heating & Air for AC Installation in League City
If your condenser is rusting at the seams, your attic unit is 20 years old, or the house just won’t stop feeling damp, we’ll send a background-checked technician to measure and quote it properly. You’ll get a written price before any work starts, a crew that cleans up like it’s their own home, and a 365-Day Done Right Promise that actually means we come back if something isn’t right. Call (747) 966-3037 today for your free AC installation estimate in League City.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving League City since the Cedarwell family began bringing residential HVAC service to the Bay Area.







Before
After
Before
After
Before
After