Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Tucker
A new AC installation in Tucker, GA typically runs $3,500-$7,500 for a complete system tailored to your home’s size, ductwork, and humidity load. Most homeowners we work with in Tucker have the job completed in one day once equipment is ordered and the City of Tucker permit clears. If your existing system is struggling through Georgia summers or your split-level can’t hold a setpoint upstairs, call (747) 966-3037 and we’ll schedule a free estimate with a written price before any work starts.
Tucker’s housing stock is its own animal. We see ranch homes off Hugh Howell Road, split-levels along Brockett Road, and brick homes near Henderson Park that all share the same challenge: original ductwork from the 1960s and 70s running through unconditioned attics that bake at 140°F in July. That’s not a generic metro-Atlanta problem. It’s a Tucker problem, and it changes how we size equipment, where we run refrigerant lines, and whether zoning makes sense. Our crews serve Tucker directly, coordinated from the brand’s Atlanta office, so we know the roads, the permit office, and the houses.
Why Meadowsweet Heating & Air Is Tucker’s Preferred AC Installation Company
Tucker homeowners tell us the same thing over and over: they want a crew that treats the house like a house, not a job site. That’s why every visit from Meadowsweet Heating & Air includes shoe covers and drop cloths before a single tool comes out, plus a photo of the clean-up before we leave. Luis Serrano leads our team with a simple standard: written price first, clean floors after, and a 365-Day Done Right Promise behind every installation. If something isn’t right, we make it right. No runarounds.
We answer the phone with a live person 24/7, including weekends and holidays. When a Tucker homeowner calls at 9 p.m. because the upstairs is 84 degrees and the kids can’t sleep, someone picks up. Not a voicemail queue. That matters in a city where summer dew points sit at 72-75°F and a failed system turns a house uncomfortable fast.
Our technicians are background-checked and uniformed, trained to work around sleeping babies, curious dogs, and family routines. We follow the C.A.R.E. values code on every Tucker job: Clean up like it’s our own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. It’s a system, not a personality thing.
Furnace Installation in Tucker
Furnace installation in Tucker runs $3,500-$7,500 and usually pairs with a new AC coil and air handler when the existing system is from the 1980s or 90s. The job involves removing the old furnace, inspecting the heat exchanger and flue, replacing the gas connection and condensate lines, and matching airflow to Tucker’s duct systems, which were often sized for heating only when homes were built between 1955 and 1980. We recommend furnace replacement when the heat exchanger is cracked, the blower motor is failing, or the system is past 15-18 years and repairs are chasing each other.
Why furnace and AC often go in together
In Tucker’s split-levels, the furnace and indoor coil share the same air handler and duct run. Installing a high-efficiency AC on a 25-year-old furnace means the blower struggles against static pressure and the coil may not fit the existing cabinet. Replacing both at once saves a second permit, a second labor day, and the headache of a mismatched system that can’t manage humidity in a crawl-space ranch.
What the install actually involves
We pull the City of Tucker mechanical permit, remove the old furnace, set the new one on a level pad or hang it in the closet, and reconnect gas, venting, and electrical according to the manufacturer’s installation manual. Then we check static pressure and temperature rise, because a furnace that moves too little air will trip limits and a furnace that moves too much will sound like a wind tunnel in a 1960s brick ranch off LaVista Road.
HVAC Installation in Tucker
HVAC installation in Tucker means more than bolting a condenser to a pad, it means matching equipment to the house’s actual layout, duct condition, and humidity exposure. We install complete systems for $3,500-$7,500, depending on the equipment tier, whether zoning is needed, and whether the existing ductwork can stay or has to be partially replaced. Homeowners call us when their current system is 12-15 years old, R-22 refrigerant is no longer available, or the upstairs and downstairs can’t agree on a temperature.
Ductwork checks before we quote
Before any equipment is sized, we walk the attic and crawl space. In Tucker, we routinely find 1980s and 90s flex duct that’s sagging, pinched, or separated at the collar, often in attics that hit 140°F in July and cause condensation inside the duct liner. If the duct is the weak link, a new system won’t fix the comfort problem. We include duct sealing or selective replacement in the quote when it’s needed, and we tell you why in plain language.
Manual J load calculations, not guesswork
We run a Manual J load calculation on every Tucker installation. That’s the only way to size for a house where summer dew points hit 72-75°F and the latent load (moisture removal) is the real challenge. A system sized only for sensible cooling will run constantly and still leave rooms feeling clammy, especially in crawl-space homes where DeKalb’s red clay soil wicks moisture upward. We design for dehumidification first, because that’s what Tucker’s climate demands.
Trusted Brands We Service in Tucker
We install and service equipment from Goodman, Rheem, York, and Daikin, among other major brands, and we stock common parts for Tucker jobs so a condenser swap or blower replacement doesn’t stall waiting on a shipment from the distributor. That local parts access means faster turnarounds when your upstairs is hot and the kids are sleeping on the couch. Whether you want a value-focused Goodman system, a two-stage Rheem with better humidity control, or a Daikin mini split for a converted garage with no ductwork, we’ll price it honestly and install it to the manufacturer’s spec. For details on our broader installation approach, see our AC Installation team’s process.
Common AC Installation Problems We See in Tucker Homes
- Single-zone systems in split-level homes. The classic Tucker split-level off Brockett Road has one thermostat, one duct system, and three different floor levels. The upper floor bakes while the lower level freezes, and no amount of fiddling with registers fixes a fundamental zoning problem. We address this with two-stage equipment, zoning dampers, or mini split heads on the upper floor.
- New condensers dropped onto failing 1980s-90s attic flex duct. The equipment outruns the duct, static pressure climbs, and the system never dehumidifies properly. We inspect the attic duct before quoting, because putting a $4,000 system on collapsing duct is a waste of your money and our reputation.
- Permits pulled from the wrong office. Since Tucker incorporated in December 2016, mechanical permits must go through the City of Tucker, not DeKalb County. Out-of-area contractors still call the county first, delay their own jobs by days, and then pass the frustration to the homeowner. We file with the City of Tucker directly.
- Oversized equipment that short-cycles. A condenser that’s too big for the load will cool the air fast but never run long enough to pull moisture out. In Tucker’s 72-75°F dew point summers, that leaves a house that’s cold and clammy at the same time, and a compressor that dies early from constant on-off cycling.
Pricing for AC Installation in Tucker, GA
A complete AC installation in Tucker runs $3,500-$7,500. That range covers the condenser, indoor coil or air handler, line set, pad, electrical disconnect, permit, and labor for a standard ranch or split-level home. Here’s how the line items break down:
| Service | Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| Furnace Installation | $3,500 - $7,500 |
Where you land inside that range depends on the SEER2 rating you choose, whether the home needs zoning or mini split heads added, and whether the attic or crawl-space ductwork has to be sealed or partially replaced. We give you a written price before any work starts, so you can plan the job without dreading the final bill. Call (747) 966-3037 for a free estimate and we’ll walk the house with you, measure the rooms, and put the numbers in your hand.
For a deeper look at the full installation process and what to expect, visit our Tucker AC installation page.
We Also Serve Cities Near Tucker
Our crews work throughout the Tucker area, including Clarkston, Stone Mountain, Scottdale, and Decatur. If you’re close to Tucker but technically across a city line, we’re still nearby and happy to help. The same written pricing, C.A.R.E. values, and 365-Day Done Right Promise apply from Clarkston to Decatur and back.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Tucker
Yes, you need a City of Tucker residential mechanical permit for an AC replacement within Tucker city limits. Since Tucker incorporated in December 2016, permit jurisdiction moved away from DeKalb County for city properties, and out-of-area contractors still get routed to the wrong office and delay their own jobs. We pull the correct City of Tucker permit before the crew arrives, and the permit fee is included in your written estimate. Call (747) 966-3037 if you’re not sure which jurisdiction applies to your address.
That imbalance is usually a duct design or zoning problem, not an equipment problem. Tucker’s 1955-1980 split-levels were built with single-zone duct systems that can’t balance upper-floor heat gain against lower-level coolness, so even a brand-new system will leave the upstairs warm. We address it with two-stage equipment, zoning dampers, or a mini split head on the upper floor where ductwork can’t be re-run. We can inspect your layout and tell you exactly what’s happening, then price the fix before any work starts.
Yes. Tucker sits in Georgia’s humid subtropical zone, where summer dew points routinely hit 72-75°F, which means a system sized only for sensible cooling will run constantly and still leave the house feeling clammy. We specify equipment with strong latent-load removal, often two-stage or variable-speed systems, and we run a Manual J load calculation so the system can handle moisture removal as its primary job. The equipment choice matters more here than in drier parts of the country.
Often yes. Many Tucker ranches and split-levels have attics that are too tight for conventional duct replacement, and running duct through a finished lower level isn’t practical. A ductless mini split from Daikin or another major brand lets us condition the upstairs or a converted garage without touching the existing duct system. We installed a Daikin mini split head on the upper floor of a LaVista Road split-level this past summer, and the bedrooms that used to run 6 degrees warm finally held setpoint. Call us and we’ll look at the attic access and tell you honestly whether a mini split is the right fit.
For Tucker’s climate, a SEER2 rating of 14-16 is the practical sweet spot for most homes. Lower-efficiency units (14 SEER2 minimum) are cheaper upfront but struggle to dehumidify on the hottest days, while high-end 18+ SEER2 variable-speed systems cost substantially more and take longer to pay back. The right number depends on your home’s layout, your comfort goals, and how long you plan to stay. We’ll show you real numbers in the estimate, not a sales pitch. Call (747) 966-3037 and we’ll walk you through the options.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Tucker since 2004.