Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Westgate
A new AC installation in Westgate typically runs $3,500-$7,500, and the work usually takes one to two days once equipment arrives. What makes Westgate different from a standard city install comes down to three things: unincorporated-county permitting, older concrete-block homes with original ductwork, and rural lots that sit fully exposed to South Florida’s wet-season heat. Meadowsweet Heating & Air handles all of it, including the Palm Beach County paperwork, the load calculation, and the duct assessment most Westgate homes need before a new system goes in. Call (747) 966-3037 for a written, no-pressure estimate.
Across Westgate, we work on homes where the AC has been limping along for 15 to 20 years, and the owner has been told three different things by three different contractors. Our job is to give you one clear answer: what the house actually needs, what it costs, and how the crew will leave the place when the work is done. Luis Serrano leads our install teams, and every job runs through the same system, a written price before any work starts, shoe covers and drop cloths inside, and a photo of the clean-up before we pull out of the driveway.
Why Meadowsweet Heating & Air Is Westgate’s Preferred AC Installation Company
Westgate homeowners call us because we understand the specific failure points of the homes here. The 1960s-1980s concrete-block houses that dominate this community were built with single-zone duct systems that were undersized the day they went in. When a homeowner in Westgate replaces an AC without addressing that ductwork, the new system runs at high static pressure, bedrooms stay humid, and the equipment ages faster than it should. We flag that before we quote, not after.
Our crews know the permitting path here runs through the Palm Beach County building division, not a city office. That distinction trips up contractors who cross over from West Palm Beach and submit to the wrong authority, which delays permits and leaves the homeowner stuck in inspection limbo. We don’t guess on that. We file correctly the first time, and we can tell you exactly which inspector covers your section of Westgate and what they’ll want to see on the duct documentation.
Every technician who steps onto a Westgate property is background-checked, uniformed, and trained on the C.A.R.E. values code: clean up like it’s their own home, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. If you’ve got kids napping or a dog who’s not friendly with strangers, tell us when you call. We’ll plan around it. That’s not an exception here. It’s the standard.
We’re part of the Cedarwell family of HVAC companies, founded in 2004, which means every Westgate install is backed by the 365-Day Done Right Promise. If something isn’t right, we make it right. No runarounds, no fine print. And the phone is answered by a live person 24 hours a day, seven days a week, including nights, weekends, and holidays.
Furnace Installation in Westgate
Furnace installation in Westgate fills a specific gap because so much of the rural land here sits beyond natural gas lines, leaving propane and heat-pump systems as the realistic options for whole-home heating and cooling. A furnace install in Westgate, paired with an AC system, runs $3,500-$7,500 for the combined job, and our teams handle everything from the combustion-air clearance calculations to the county-required permit.
Propane and Heat Pump Choices
On larger Westgate lots where running a gas line from the street isn’t possible, a propane furnace with a high-efficiency heat pump handles both the cold snaps and the long cooling season. We’ll help you compare installed cost, fuel cost per season, and how each option performs on an exposed property that gets no relief from the June-September humidity.
Sizing for Homes Without Wind Shelter
Exposed rural properties in Westgate heat differently than shaded suburban lots, and that changes the load calculation. We account for that exposure directly. An undersized furnace leaves cold spots in the far bedrooms, and an oversized one short-cycles and never removes humidity. Our calculations are done room by room, not by rule of thumb.
HVAC Installation in Westgate
HVAC installation in Westgate means replacing the full system, furnace or air handler, condenser, coil, and in most of the homes here, the degraded ductwork, not just swapping a single component. A complete HVAC installation in Westgate runs $3,500-$7,500 depending on tonnage, efficiency tier, and how much duct remediation the home needs. That’s not a number we pull from a catalog. It reflects what actually gets done on these blocks.
Duct Remediation and the Single-Return Problem
The original attic-run flex duct in many Westgate CBS homes has collapsed, separated, or was sized wrong from the start. Worse, the single-return-air configuration creates negative pressure in bedrooms, which pulls unconditioned humid air through block-wall gaps. A new system can’t fix that by itself. Adding a second return and rebalancing static pressure is what makes the difference between a cool-but-humid house and a genuinely comfortable one.
Workshop and Outbuilding Conditioning
Plenty of Westgate properties have a workshop, a converted garage, or a separate structure that needs conditioning. We can run a dedicated mini-split for those spaces, or design the main system to carry them if the load calculation supports it. Either way, we’ll tell you the honest trade-off in cost and comfort before you commit.
Trusted Brands We Service in Westgate
We stock and service Goodman, Rheem, and Daikin equipment for Westgate customers, which covers the brands that tend to perform best on these exposed lots and in these older CBS homes. Because we carry local parts for these systems, common repairs and install-phase adjustments happen faster, often the same week the equipment arrives. We’ve installed a lot of Goodman heat pumps on Westgate Avenue and the surrounding roads, and we know what each brand’s current models can and can’t handle in this humidity. If you have a preference, we’ll work with it. If you don’t, we’ll make a specific recommendation based on your house, not a brand loyalty that doesn’t serve you.
Common AC Installation Problems We See in Westgate Homes
- County permit filed to the wrong authority. Contractors coming from West Palm Beach sometimes submit to the city, and the job stalls. In Westgate, everything runs through Palm Beach County’s building division, and inspectors here commonly ask for duct remediation documentation on older homes, so that paper trail matters from day one.
- New equipment on degraded ductwork. We regularly see new condensers and coils mounted to original single-return duct systems, with attic flex that’s split or collapsed. The new system runs at high static pressure, bedrooms stay humid, and the homeowner is told they have a refrigerant leak. They don’t. They have a duct problem.
- Oversized tonnage on exposed lots. A replacement sized by square footage alone ignores the fact that rural Westgate properties have no wind shelter. The oversized system short-cycles, never pulls humidity down, and costs more to run than a correctly sized one would.
- No load calculation on rental properties. Westgate has a high proportion of rentals, and we often find the system was replaced years ago with whatever was cheapest and available. A proper load calculation, done room by room, catches undersized return air and wrong static pressure before the new equipment goes in, not after.
Pricing for AC Installation in Westgate, FL
| Installation Type | Price Range |
|---|---|
| AC Installation (standard system) | $3,500-$7,500 |
| Furnace Installation (with AC) | $3,500-$7,500 |
| HVAC Installation (full system) | $3,500-$7,500 |
What moves the number inside that range: the SEER2 efficiency tier you choose, whether the home needs duct remediation (which it usually does on these 1960s-1980s CBS builds), and whether you’re adding a second return to fix negative pressure in the bedrooms. We give you a written price with no obligation, and the quote is free. Call (747) 966-3037 and we’ll put specific numbers on your house, not a range sheet.
We Also Serve Cities Near Westgate
We work across the region, and the same care standards apply everywhere we go. If you’re outside Westgate proper, we also handle AC Installation in Jacksonville, Miami, Tampa, and Orlando, with the same written pricing, the same background-checked crews, and the same 365-Day Done Right Promise. Scheduling is coordinated from our South Florida office, and our install teams cover Westgate and the surrounding areas directly.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Westgate
Do I need a county permit to install a new AC in Westgate, and who inspects it?
Yes, every AC installation in Westgate requires a permit through the Palm Beach County building division, because Westgate is an unincorporated area with no city building department of its own. The county inspector assigned to your section of Westgate reviews the mechanical work and, on most older CBS homes, wants to see documentation that the ductwork was assessed or remediated as part of the install. We file the permit correctly the first time and coordinate the inspection on our end. Call (747) 966-3037 to get the process started.
Can you install a propane furnace or heat pump in Westgate where natural gas isn’t available?
Yes, propane and heat-pump systems are the two realistic options on most rural Westgate lots where natural gas lines don’t run, and we install both. A propane furnace paired with a high-efficiency AC, or a heat pump running on electric, gives you reliable heat and cooling without a gas utility line. We’ll compare installed cost, seasonal fuel cost, and how each handles an exposed property so you can choose with real numbers in front of you.
Why is duct work almost always part of an AC replacement in Westgate?
Because the original single-zone duct systems in Westgate’s 1960s-1980s CBS homes were often undersized from the day they were installed, and decades of attic heat and humidity have degraded the flex runs further. A new system installed on that old ductwork builds high static pressure and pulls humid air through block-wall gaps, especially in bedrooms at the far end of the run. Duct remediation, including adding a second return, is what actually makes the new equipment deliver the comfort you’re paying for.
How do you size an AC for an exposed Westgate property with no wind shelter?
We size by full room-by-room load calculation, not square footage, and we factor in the exposure, orientation, window area, and construction type of the particular house. An exposed rural lot in Westgate takes more heat gain than a shaded suburban parcel, and sizing up to compensate actually makes humidity worse by short-cycling. The calculation tells us the true tonnage and airflow needs, and that’s the number we install to.
What SEER2 rating should I look for on a new system in Westgate?
For Westgate’s year-round cooling season, we typically recommend a SEER2 rating of 15.2 to 17, which delivers meaningful electrical savings over the older 10-12 SEER equipment we commonly remove from these homes without the upfront premium of the highest efficiency tiers. The right choice depends on how many hours your system runs during the wet season, which on an exposed Westgate lot is usually a lot. Call (747) 966-3037 and we’ll model the payback on two or three efficiency options for your specific house.
Written by the team at Meadowsweet Heating & Air, part of the Cedarwell family of HVAC companies, serving Westgate with the 365-Day Done Right Promise.