Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Lennox HVAC in Houston, CA | Meadowsweet Heating & Air
We provide independent Lennox service across Houston, from Katy to Pearland, and the single thing that separates our Lennox work here is humidity. A Lennox that cools to 75°F but leaves the house at 65% relative humidity is a failed install in Houston, plain and simple. Our techs size, diagnose, and repair Lennox equipment on latent load first, because Gulf-fed dew points don’t care what the thermostat says. Need help now? Call (747) 966-3037 and a live person answers, day or night.
Why Houston Residents Choose Us for Lennox Service
Meadowsweet Heating & Air has worked on Lennox equipment across Houston’s slab-on-grade suburbs for years, and we’ve learned exactly what this climate does to these machines. We’re an independent Lennox service provider, not authorized or sponsored by Lennox, which means we tell you the truth about a repair even when that truth is “this part is backordered and here’s a lower-cost UL-listed alternative that’ll work.” Luis Serrano, our owner and lead technician, trained in refrigeration and air conditioning technology at East Los Angeles College, then spent two decades working on systems from aging wall units to rooftop packages. He started Meadowsweet because homeowners kept getting talked past instead of talked to. That’s why every visit includes a written price before any work starts, shoe covers and drop cloths inside your home, and a photo of the clean-up before the crew leaves. We also back every Lennox job with our 365-Day Done Right Promise. If it’s not done right, we make it right. No fine print.
Common Lennox HVAC Problems We Solve in Houston
Here’s what we’re actually finding inside Lennox systems across Houston, week after week:
- Brazed joint leaks on Elite and Signature outdoor units. Lennox XC21 and SLP98V systems lose charge through brazed joints that stress-fracture during Houston’s March-through-November runtime. That’s nine months of thermal cycling, and the joints are the first thing to let go.
- Merit series heat pumps freezing during hard freezes. The ML14XP1 installs Houston took on after Winter Storm Uri use standard defrost logic, not cold-climate-rated. When Gulf humidity freezes on the outdoor coil, the defrost cycle trips repeatedly and the home loses heat exactly when it needs it most.
- Inverter lockouts on Signature variable-speed compressors. The SL28XP is sensitive to low-voltage control fluctuations common in older Houston slab neighborhoods. You get nuisance lockouts, not a hard compressor failure, which means the system looks dead but isn’t.
- Attic air handler sweating and overflowing drain pans. Lennox cased coils sweat heavily at Houston’s 75 to 78°F dew points. Clogged or undersized condensate management leads to overflowing primary pans and rusted secondary pans, which owners often mistake for a refrigerant leak.
- Short-cycling oversized systems that leave homes clammy. An oversized Lennox can hold 75°F indoors while humidity stays at 65% RH. That’s not a comfort problem. That’s a mold risk waiting on the back side of drywall.
Lennox Service in Houston: What Local Conditions Mean for Your Equipment
Here’s the fact that changes everything for Lennox owners in Houston: the city’s Gulf-fed dew points regularly hit 75 to 78°F in summer, among the highest in the continental U.S. That means moisture removal is the job, not temperature control. A Lennox system that cools air quickly but doesn’t run long enough to wring water out of it will leave a home feeling like a walk-in cooler at a crawfish boil. This is why we size Lennox equipment on latent load first and sensible load second, something you don’t hear much about from contractors who learned their trade in drier Sun Belt markets like Phoenix or Dallas. Houston’s cooling season stretches from roughly March through November, so residential systems here accumulate operating hours equal to two full northern-climate seasons every single year. That pace accelerates compressor wear and refrigerant loss, which is exactly why we stock OEM-spec Lennox compressors, control boards, and motors where lead times allow. It also explains why a Lennox that performed beautifully in a Dallas attic may underperform in Katy without humidity-first sizing and service. The math changes here. We do the math.
Lennox Models & Products We Service in Houston
We service the full range of Lennox equipment, including the Elite Series (XC21 and XC25 air conditioners, EL16XC1), the Dave Lennox Signature Collection (SL28XP, SLP98V), the Merit Series (14ACX, ML14XP1 heat pumps), and the Lennox ductless mini-splits (MS8C and M33 series). Our parts approach is simple and honest: OEM-spec Lennox components where lead times allow, UL-listed aftermarket capacitors, ignitors, and contactors when the OEM is backordered or you’d rather keep the bill lower. We’ll always tell you which one goes on your system and why. On Lennox systems past 12 to 14 years old with a failed compressor or leaking coil, we’ll show you the repair-versus-replacement math in writing. Houston’s double operating hours make that calculation very different from what you’d hear in a cooler market.
Lennox Service Pricing in Houston
| Service | Price Range |
|---|---|
| AC Repair | $150-$650 |
| Furnace Repair | $150-$700 |
| AC Installation | $3500-$7500 |
| Tune-Up | $80-$200 |
What drives the difference? A capacitor swap sits at the low end. A control board or inverter diagnosis lands higher. A compressor replacement on a Signature system with OEM parts is the top of the range. Every estimate includes a written price before any work starts, so you’ll never sit through a surprise at the end. Call (747) 966-3037 for a free estimate and we’ll tell you exactly what the repair costs down to the dollar before a single tool comes out of the bag.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well, offering our AC Repair in Houston to local homeowners. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lennox HVAC in Houston
Will a Lennox variable-speed system actually fix Houston’s indoor humidity, or is a separate dehumidifier necessary?
A true variable-speed Lennox like the SL28XP will pull far more moisture than a single-stage Merit unit because it runs longer at lower capacity, but at Houston’s 75 to 78°F dew points, a whole-home dehumidifier is often still the difference between 48% and 55% RH. We’ve seen variable-speed systems get homes to 48% on their own in shoulder seasons and fall short in July. We’ll test your home’s actual latent load before recommending anything. Call (747) 966-3037 and we’ll tell you if your system can handle Houston humidity on its own.
My Lennox heat pump froze during the last hard freeze. Is it worth repairing or replacing?
If your ML14XP1 or similar Merit series heat pump uses standard defrost logic, the freeze you saw is a design limitation, not a one-off failure. A cold-climate-rated unit or a dual-fuel setup is the honest fix. Repairing the existing unit may buy a season, but Houston’s post-Uri retrofit cycle has shown us that the replacement math usually favors an upgrade. Call (747) 966-3037 and we’ll walk you through both options with real numbers.
Why does my Lennox attic air handler drip water even when the AC is working?
Your cased coil is sweating, and the condensate management isn’t keeping up. At Houston summer dew points, attic air handlers produce a surprising volume of water. A clogged primary drain, a cracked pan, or an undersized drain line will overflow and drip. It’s often mistaken for a refrigerant leak, but it’s usually a drainage issue we can fix the same day.
Do you use Lennox OEM parts or aftermarket on repairs?
Both, and we’ll always tell you which one we’re recommending and why. OEM-spec Lennox compressors, control boards, and motors go in where lead times allow. UL-listed aftermarket capacitors, ignitors, and contactors are our choice when the OEM part is backordered or you prefer a lower cost point. You always get the final call, in writing, before the work starts.
How often should a Lennox system in Houston get a tune-up?
Twice a year, minimum. Houston’s nine-month cooling season and Gulf-fed humidity put double the operating hours on residential Lennox equipment compared to northern markets. A spring tune-up before the heat and a fall check before the first hard freeze will catch refrigerant loss at the brazed joints and defrost issues before they leave you without heat. Our tune-ups run $80 to $200 and include a written report of what we actually found. Call (747) 966-3037 to schedule.
Service Areas Near Houston
We serve Houston’s neighboring suburbs, including Katy, Pearland, Sugar Land, and The Woodlands. If you’re outside Houston proper but within the metro area, we’ll come out. We also maintain service teams for Lennox sales & service across our wider footprint, including Lennox service in Queens and Lennox service in Manhattan. For a full look at our coverage, see our Houston service area page.
Book Your Lennox Service in Houston Today
If your Lennox is short-cycling, dripping, or just not keeping up with Houston humidity, call (747) 966-3037. A live person answers 24/7, no voicemail queue. We’ll set a time, show up with shoe covers and drop cloths, and leave you with a written price and a clean home. Same-day availability whenever the schedule allows.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Houston since 2004.







Before
After
Before
After
Before
After