Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterTrane HVAC in Arlington, CA | Meadowsweet Heating & Air
We provide independent Trane repair and replacement across our Arlington service area, and the one thing that makes our Trane work here different is this: we know what Arlington’s 1960s-1980s brick tract homes do to Trane equipment over forty summers of 100°F heat and 150°F attics. We’re not a manufacturer-authorized dealer. We’re a local shop that diagnoses Trane-specific failures like formicary coil leaks and communicating thermostat faults without any factory backing, and we stock or can source OEM Trane parts fast. Call Luis Serrano and our team at (747) 966-3037 for a written price before any work begins.
Why Arlington Residents Choose Us for Trane Service
Luis Serrano trained in refrigeration and air conditioning technology at East Los Angeles College, then spent two decades working on systems across the basin before starting Meadowsweet because homeowners felt talked past rather than talked to. That shows up in how we handle Trane calls: we name the exact part, the exact price, and the exact reason it failed before a single tool comes out of the bag. We’ve worked on Trane sales & service across Arlington’s aging single-story stock for years, from original XR13 condensers in South Arlington to newer XV20i variable-speed systems in remodeled homes near Pioneer Parkway. We use OEM Trane capacitors, ignitors, and control boards where available, and quality aftermarket equivalents for common wear parts like contactors when factory lead times stretch past a few days. Every visit includes a written price, shoe covers and drop cloths inside the home, and a photo of the clean-up before we leave. That’s the Cedarwell Care Promise, and it’s non-negotiable.
Common Trane HVAC Problems We Solve in Arlington
- Failed run capacitors in unconditioned attics. On older XR13 and XB13 units, the run capacitor fails prematurely because Arlington attics routinely hit 150°F in July, well above the component’s comfortable operating range. We replace them with higher-rated 440V capacitors that tolerate the heat better than the factory 370V parts.
- Formicary corrosion pinhole leaks in Trane aluminum evaporator coils. Gulf moisture and heavy summer runtime accelerate this known XR-series issue. We pressure-test with nitrogen and often find leaks at the U-bends after 8 to 12 years, especially on units that run nearly continuously from June through September.
- ComfortLink II communication faults on XV20i systems. Communicating Trane systems throw fault codes when the thermostat loses communication with the air handler. In older Arlington homes with undersized returns and long thermostat wire runs, voltage drop is a frequent culprit we trace and correct.
- Heat pump changeover failures after hard freezes. After February 2021, we saw Trane heat pumps across Arlington stuck in defrost or running with damaged reversing valves, especially units that cycled continuously during the freeze without auxiliary heat staging correctly. We diagnose the changeover problem before replacing parts.
- Duct board collapse in 1960s-1980s attic installs. In older neighborhoods flanking Pioneer Parkway and South Collins Street, original fiberglass duct board delaminates and collapses, causing 30-40% conditioned-air loss. Homeowners often blame the Trane unit when the duct system is the real failure.
Trane Service in Arlington: What Local Conditions Mean for Your Equipment
Arlington’s residential boom between 1960 and 1985 packed south and central Arlington with single-story brick-veneer tract homes that are now 40 to 60 years old. Many still run original or once-replaced duct systems laid in unconditioned attics that regularly exceed 150°F in July, the rated upper limit for fiberglass duct board. That heat doesn’t just stress your Trane equipment; it cooks the distribution system feeding it. And because Arlington operates as a fully independent municipality between Dallas and Fort Worth with its own building and permitting department, every Trane AC or heat pump replacement here requires an Arlington-issued mechanical permit and a city inspection. Out-of-town contractors frequently overlook that layer. We don’t. We pull the permit, schedule the inspection, and make sure the job passes before we call it done.
Trane Models & Products We Service in Arlington
We service every Trane line we see in Arlington: XR13 and XR14 single-stage split systems, XB13 and XB14 builder-grade units, XR15 and XR16 two-stage systems, and XV20i variable-speed heat pumps. For Trane units over 15 years old facing compressor or coil replacement, we lay out the math honestly. A $2,500+ repair on a 2005 XR13 often makes replacement the better call, but we’ll show you both paths and let you decide. We stock OEM Trane capacitors, ignitors, and control boards where available. When OEM lead times stretch, we use quality aftermarket equivalents for wear parts like contactors and relays, and we tell you exactly which part we’re using and why.
Trane Service Pricing in Arlington
Here’s what Trane repair and replacement work typically costs in Arlington. These ranges reflect what we see across the city’s housing stock:
| Service | Typical Price Range |
|---|---|
| AC Repair | $150-$650 |
| AC Installation | $3,500-$7,500 |
| Furnace Repair | $150-$700 |
| Tune-Up | $80-$200 |
What drives the final number: the specific Trane model, the part that failed, and how accessible your attic or closet is. A failed capacitor is a quick fix. A formicary coil leak is not. Free estimates are part of every visit, and you’ll have a written price before any work starts. Call (747) 966-3037 and Luis or a team member will walk you through it.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane HVAC in Arlington
Do you need an Arlington permit to replace my Trane AC or heat pump?
Yes. Arlington runs its own building and permitting department separate from Dallas and Fort Worth, so every Trane AC or heat pump replacement requires an Arlington-issued mechanical permit and a city inspection. We handle both as part of the job. Out-of-town contractors sometimes skip this step, which leaves you with an unpermitted install that can complicate resale. Call (747) 966-3037 and we’ll walk you through what the permit process looks like for your specific home.
My Trane XR13 is 15 years old and needs a $1,800 coil replacement - should I repair or replace?
At 15 years old, an XR13 with a failed evaporator coil is approaching the end of its expected service life, even in milder climates. In Arlington’s heat, where the system runs nearly continuously from June through September, a $1,800 coil repair on a 2009 unit often buys you two or three more summers at best. When that time comes, our AC Repair in Arlington can help you weigh your options. A new system with a fresh warranty and higher efficiency typically makes more sense, but we’ll show you the numbers for both paths and let you decide. Call (747) 966-3037 for an honest comparison.
Why does my Trane heat pump struggle after freezes like February 2021?
Heat pumps lose heating capacity as outdoor temperatures fall, and during a hard freeze like February 2021, many Trane heat pumps ran continuously without auxiliary heat staging correctly. That can damage reversing valves or leave units stuck in defrost. In Arlington’s brick homes with undersized returns, the problem compounds because the system can’t move enough air to extract heat effectively. If your heat pump isn’t keeping up, Arlington Furnace Repair may be needed to restore full heating capacity. We test changeover operation under load to find the real fault before replacing parts. Call (747) 966-3037 and we’ll come diagnose it.
What’s the most common Trane failure you see in Arlington attics?
Failed run capacitors, full stop. Arlington attics hit 150°F in summer, and the factory 370V capacitors on older XR13 and XB13 units simply don’t tolerate that kind of sustained heat. We replace them with higher-rated 440V parts. The second most common is duct board collapse, which isn’t a Trane problem at all, but it destroys efficiency and homeowners blame the unit. Call (747) 966-3037 and we’ll check both.
Can you service my Trane XV20i variable-speed system, or do I need the original installer?
You don’t need the original installer. Trane XV20i systems use ComfortLink II communicating controls, and we diagnose faults on those systems routinely. The most common issue we see in Arlington is lost communication between the thermostat and air handler, often from voltage drop on long thermostat wire runs in older homes. We carry the diagnostic tools and know the fault codes. Call (747) 966-3037 and we’ll come sort it out.
Service Areas Near Arlington
While we’re based to serve Arlington service area directly, our Trane team also covers nearby communities across the region. If you’re in Los Angeles, Brooklyn, Houston, Queens, Manhattan, or Philadelphia, we may be able to help depending on your location. For Trane work closer to the coast, see Trane service in Long Beach or Trane service in Fresno for inland coverage. Call (747) 966-3037 to confirm service availability in your neighborhood.
Book Your Trane Service in Arlington Today
Tell me what the house feels like, and I’ll tell you what’s actually going on. That’s how we start every Trane call in Arlington. Call (747) 966-3037 for a free estimate and a written price before any work starts. We answer live, 24 hours a day.
Written by Luis Serrano, Owner & Lead HVAC Technician at Meadowsweet Heating & Air, serving Arlington since 2004.