Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterHVAC Company in Briar, TX
Meadowsweet Heating & Air is the HVAC company that treats a Briar job as a rural acreage job, not a suburban one. Most homes here sit on half-acre to multi-acre lots in the Cross Timbers, where wind-driven wear on condenser units and corrosion along refrigerant line sets are a normal part of equipment life. Whether you need AC Repair in Briar or a full system replacement, our crews come prepared for manufactured-home ductwork, propane furnaces, and the dust that rolls in off open pasture. Call (747) 966-3037 and a live person answers, day or night.
Why Briar Homes Are Different
Briar is an unincorporated community in Parker County, which means there is no city building-permit office and HVAC work falls under county-level oversight. The housing mix skews heavily toward manufactured and modular homes on rural acreage. That changes the work in real, technical ways. Many of these homes have undersized equipment alcoves, belly-board ductwork that degrades over time, and crossover duct connectors that standard sheet-metal crews are not set up to handle. A technician who has never worked on a manufactured-home system can misdiagnose a simple airflow problem as a compressor failure.
Then there is the fuel question. Briar has no municipal natural-gas grid, so most heating systems run on propane. When propane prices in Parker County spike, we field a wave of calls from homeowners asking about heat-pump conversions and dual-fuel setups that pair an electric heat pump with a propane furnace backup. Understanding Tri-County Electric Cooperative rates and running proper load calculations for a propane-to-electric switch is part of the job here in a way it is not inside the Fort Worth city limits.
Our Main Briar Services
Three services carry most of our call volume in Briar, and each has its own page with local pricing, repair details, and what to expect. Here is what matters most for each in this area.
AC Repair in Briar
When a condenser unit sits exposed on open rolling terrain, the coil takes a beating. We regularly see Briar AC failures driven by compacted dirt and grass clippings from mowing, refrigerant line-set corrosion from wind-driven moisture, and capacitors worn down by 100°F summer afternoons. Repairs in the area typically run $150 to $650, depending on whether it is a contactor, capacitor, refrigerant leak, or compressor issue. AC Repair in Briar covers everything from diagnostic-only visits to full condenser replacements on Trane, Lennox, Goodman, and Rheem systems, among others.
Furnace Repair in Briar
Propane furnaces dominate Briar heating, and they fail differently than natural-gas units. Soot buildup on burners, regulator pressure swings, and ignition issues are common, especially after an ice-belt storm pushes systems to run hard for days. Furnace repair here typically runs $150 to $700. On manufactured homes, we also deal with duct crossover failures that read as furnace problems but are actually airflow leaks under the belly. Furnace Repair in Briar walks through the common failure points, what we check first, and how we leave the home.
AC Installation in Briar
Newer Briar construction skews custom and semi-custom, with oversized square footage that makes a Manual J load calculation non-negotiable. Rule-of-thumb sizing fails here, and it fails expensive. For manufactured homes, we specify units rated for manufactured-home alcoves and match them to the existing crossover ductwork or rework it properly. Full AC installation in Briar typically runs $3,500 to $7,500, depending on system size, efficiency tier, and whether ductwork needs repair. AC Installation in Briar explains sizing, rebates, and how a fixed written price works before the job starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Briar
We service and install Trane, Lennox, Goodman, and Rheem equipment, and our trucks carry the common capacitors, contactors, igniters, and pressure switches that keep most repairs moving same-day. When a part is not on the truck, we source it through our DFW supply network. See our brands for the full list of nine manufacturers we are qualified to work on.
Pricing for HVAC Company in Briar, TX
| Service | Typical range in Briar |
|---|---|
| AC repair (diagnostic through compressor) | $150-$650 |
| Furnace repair (igniter through heat exchanger inspection) | $150-$700 |
| AC installation (full system) | $3,500-$7,500 |
| Tune-up (single system) | $80-$200 |
What pushes a Briar price toward the top of a range is usually access: tight manufactured-home equipment alcoves, longer line-set runs across exposed terrain, and ductwork that has to be re-supported under the belly of a home before new equipment goes in. Every job gets a written price before any work starts, so the number is settled before a tool comes off the truck.
Neighborhoods We Serve in Briar
Briar is spread across Parker County acreage, and we cover the communities off FM 730 and the surrounding ranch roads. Families here schedule around school drop-offs and livestock feeding, so we are specific about arrival windows.
- Briar proper and the FM 730 corridor
- Acreage communities around Old Dennis Road
- Manufactured-home developments near Azle city limits
- Rural lots along Ranch to Market Road 730
- Custom homes east of Eagle Mountain Lake
Service Area – Cities Near Briar
We serve Briar locally and coordinate dispatch from our Dallas-Fort Worth office. Crews also cover nearby metro and rural communities, including Fort Worth, TX, Houston, TX, Dallas, GA, and San Antonio, FL.
Serving Briar, TX - Our Local Coverage Area
We’re based in the Briar area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Briar
Most Briar calls are answered by a live person immediately and scheduled the same or next day. Terrain and acreage mean the last mile can add fifteen minutes, but we give a real arrival window, not a four-hour spread. Call (747) 966-3037 to check today’s schedule.
Briar is unincorporated, so there is no city permit office. HVAC work operates under county-level oversight, and we handle whatever paperwork applies. No HOA approval process is standard here, though a few newer acreage developments have covenants. We will tell you before work starts if anything applies.
Yes, and it is a core part of our Briar work. We handle belly-board ductwork, crossover connectors, and the equipment-alcove constraints common in manufactured homes. If you have had another company decline the job, call us at (747) 966-3037 for a straight answer.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Briar Customers Say
"New system install. They protected the hallway floor all the way to the attic and vacuumed after. Worked quietly around my work calls. Not a trace left behind."
- Rosalind Okeke"AC repair in July. The tech laid a mat down by the indoor unit and wore booties through the house. Fixed it fast and left zero mess. Quiet and kind, good with our nervous dog too."
- Delia Frost"Good repair and a very tidy, respectful tech. The appointment window was wide and he came near the end of it, but he texted ahead. Work itself was clean and done right."
- Nadine Oakley