Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Conroe
When your furnace quits on a cold Conroe morning, you need a Conroe AC Repair crew that knows the homes here, not just the equipment. Furnace repair in Conroe typically runs $150-$700 depending on what failed, and our technicians arrive ready to diagnose the actual problem before quoting a single dollar. We work throughout Conroe, from the older ranch homes near downtown to the newer subdivisions around Grand Central Park, and we answer every call with a live person, day or night. If your heat is down, call (747) 966-3037 and we’ll get someone to your door.
What makes Conroe different from the rest of the Houston metro is the housing stock itself. A lot of the pre-1980 homes here were built with ductwork and return-air paths sized for equipment that ran harder and less efficiently than today’s models. That older infrastructure changes how a furnace repair should be approached, and it’s why we never just swap a part and leave. Our Furnace Repair team treats every call as a chance to fix the whole heating path, not just the component that failed.
Why Meadowsweet Heating & Air Is Conroe’s Preferred Furnace Repair Company
Meadowsweet Heating & Air operates as an independent location within the Cedarwell family of HVAC companies, founded in 2004. Every job we take in Conroe is backed by the Cedarwell Care Promise: a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise that stands behind the work. If it’s not done right, we make it right. No runarounds, no fine print.
Luis Serrano leads our service across the Conroe area, and the standard he sets is simple: treat every home the way you’d treat your own. That means shoe covers and drop cloths on every visit, a photo of the clean-up sent before the crew leaves, and a C.A.R.E. values code that every technician follows. Clean up like it’s their own home. Ask before moving anything. Respect the family’s time and quiet hours. Explain the price before the work. For families with kids and pets in Conroe, that level of care during a furnace repair matters.
We service nine equipment brands including Goodman, Rheem, and York, which means we can handle almost any furnace sitting in a Conroe utility closet or attic crawlspace. A live person answers our phone 24 hours a day, 7 days a week. When your heat goes out at 11 p.m. in the middle of a cold snap, you’ll talk to a human, not a voicemail queue.
Boiler Repair in Conroe
Boiler Repair in Conroe is a specialized job that more homeowners need than you might expect, especially in the older homes near downtown where hydronic heat was common decades ago. A boiler repair typically falls within the $150-$700 range on our pricing sheet, though the work itself is different from a forced-air furnace call. It involves checking the circulator pump, the expansion tank, the pressure relief valve, the low-water cutoff, and the heat exchanger for cracks or corrosion. In Conroe’s humid climate, boiler flue pipes and exterior venting also take a steady hit from moisture, which can accelerate rust on metal components.
Circulator and Zone Valve Diagnosis
When a Conroe boiler runs but the radiators in one room stay cold, the problem is often a failed circulator pump or a stuck zone valve. These parts wear out on the older hydronic systems we see in homes near downtown Conroe, and replacing them is usually a same-day job once we’ve confirmed the diagnosis with a flow test and a resistance check.
Expansion Tank and Pressure Issues
A waterlogged expansion tank will make the pressure gauge bounce and can trip the high-limit switch, which shuts the whole boiler down. In older Conroe homes with original steel expansion tanks, the bladder has often failed years ago. We replace the tank, repressurize the system, and check every bleeder valve before we call the job done.
Gas Furnace Repair in Conroe
Gas Furnace Repair in Conroe covers the equipment that heats the majority of homes in this area, from the builder-grade units in Woodforest to the aging systems in 1970s ranches closer to downtown. Most gas furnace repairs land in the $150-$700 range depending on the failed part. We diagnose the ignitor, flame sensor, gas valve, pressure switch, control board, and blower motor, then hand you a written price before any work starts. No exceptions. When a Conroe homeowner calls about a gas furnace that won’t ignite on the first cold morning, the three most common culprits are a dirty flame sensor, a cracked ignitor, or a gas valve that’s not opening.
Ignitor and Flame Sensor Service
The ignitor is the piece that glows red-hot to light the burner. In Conroe’s humidity, the flame sensor and ignitor both collect residue faster than in drier climates, and that film can fool the control board into shutting the system down mid-cycle. We clean or replace the sensor, test the ignitor’s resistance, and confirm safe burner operation before we leave.
Gas Valve and Pressure Switch Testing
A gas valve that chatters or refuses to open is a safety concern that needs a trained technician. We check the manifold pressure, test the valve’s signal from the control board, and verify the pressure switch is reading the draft inducer correctly. This is not a DIY repair. A gas furnace carries genuine risk when components are misdiagnosed, so a proper combustion test is part of every gas valve repair we do in Conroe.
Trusted Brands We Service in Conroe
We repair and install furnaces from Goodman, Rheem, York, and Daikin, among the nine brands we service across the Conroe area. Because Conroe homes carry such a mix of equipment, from 20-year-old Goodman gas furnaces in older subdivisions to newer Rheem and York units in Grand Central Park, we keep common parts stocked for fast turnaround. If you have a furnace that’s still under manufacturer warranty, we handle the paperwork and verify coverage before ordering parts. That speeds up the repair and keeps your cost down.
Common Furnace Repair Problems We See in Conroe Homes
- Short-cycling from undersized return-air paths. In older Conroe homes, the return duct is often too small for the furnace it serves. That raises static pressure, overheats the heat exchanger, and makes the system cycle on and off. Until the return path is corrected, any furnace will keep doing this.
- Blower motor overamping from leaky attic ductwork. Pre-1980 Conroe homes run ductwork through unconditioned attics with marginal insulation. Leaky trunk lines make the blower work harder than it was rated to, and that burns out motors and stresses the control board.
- Heat exchanger stress cracks. When a furnace short-cycles or runs with restricted airflow, the heat exchanger expands and contracts more than it should. We’ve pulled older Goodman furnaces from 1970s Conroe ranches where the heat exchanger showed visible stress cracks. That’s a safety issue, not just a performance one.
- Electrical panel limitations. Many homes near downtown Conroe still have original electrical panels that lack a dedicated circuit for a modern furnace’s control board and blower motor. A like-for-like swap can trip the breaker before the new equipment ever heats the house. We check panel capacity on every repair call where a replacement is being considered.
Pricing for Furnace Repair in Conroe, TX
Here’s what furnace repair work costs in Conroe based on the jobs we do most often:
| Service | Typical Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Tune-Up | $80-$200 |
A simple ignitor replacement or flame sensor cleaning usually lands at the lower end of that range. A gas valve replacement or a blower motor swap pushes it higher. The price you see is the price you approve, because we write it down before any work begins. We don’t charge overtime for evening or weekend calls in Conroe, and every estimate is free. Call (747) 966-3037 and we’ll give you exact numbers for your situation.
We Also Serve Cities Near Conroe
Our Furnace Repair in Conroe service area extends into the nearby communities of Willis, Montgomery, Splendora, and Pinehurst. If you live just outside Conroe, we can still get a technician to your door, often the same day. Ask when you call and we’ll confirm response time for your specific location.
Serving Conroe, TX - Our Local Coverage Area
We’re based in the Conroe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Conroe
The thermostat is rarely the problem in older Conroe homes. Short-cycling is usually caused by restricted airflow from undersized return ducts, a clogged filter, or a heat exchanger tripping its high-limit switch. Until the airflow problem is corrected with a static pressure test and duct correction, any new thermostat will behave the same. Call (747) 966-3037 and we’ll diagnose the actual airflow issue before you spend more on parts.
Most of the time, no, not without some correction. The original ductwork in pre-1980 Conroe homes was sized for older equipment and often leaks significantly in unconditioned attics. A new high-efficiency furnace needs a properly sealed return path and supply runs that aren’t strangling the airflow. We’re happy to test your ductwork and tell you exactly what’s required before any equipment goes in. Call (747) 966-3037 for a free estimate.
That smell is dust that settled on the heat exchanger and burner assembly during the months the furnace sat unused. The first few cycles of the season burn it off. In Conroe’s humid climate, dust also mixes with moisture and forms a film on the components, which can make the smell linger longer. If the smell doesn’t clear after a day or two, or if you notice a lingering gas odor, shut the system down and call (747) 966-3037 immediately.
It depends on the ductwork and panel capacity, not just the equipment. Older Conroe homes with original undersized duct chases and limited electrical panels often struggle to support a heat pump’s airflow requirements. A gas furnace may be the simpler upgrade if you’re keeping the existing ducts. We’ll run a load calculation and check your panel before recommending either option. Call (747) 966-3037 to schedule that assessment.
First, check that the gas shutoff valve is open and the breaker hasn’t tripped. If those are fine, the most common causes are a dirty flame sensor, a cracked ignitor, or a failed gas valve. Don’t keep cycling the system, as that can flood the combustion chamber. Shut it down and call (747) 966-3037. We can usually get a technician to your Conroe home the same day.
Understanding Why a Like-for-Like Swap Disappoints in Conroe’s Older Homes
If you live in an older Conroe home near downtown, here’s something most companies won’t tell you: the original furnace flue and attic duct chase are often undersized for a modern condensing unit. The real bottleneck is not the furnace itself but the return-air path and static pressure that was never part of the builder’s spec. That means a like-for-like swap in a 1960s Conroe bungalow will often perform worse than the same equipment in a newer Woodforest home with a properly sealed return. Until the airflow is corrected, you’re paying for efficiency you’ll never get.
At a 1970s ranch near downtown Conroe, our tech pulled a 20-year-old Goodman gas furnace that had been short-cycling. The heat exchanger showed stress cracks and the single-zone thermostat was swinging the house by 6 degrees because the original trunk line fed one oversized register in the hall. We ran a load calculation on the leaky attic ductwork, sealed and rebalanced the supply runs, and set a two-stage Carrier with a matched blower motor so the back bedrooms no longer cooked while the living room froze. The homeowner’s winter gas usage dropped noticeably, and the furnace has held stable through two heating seasons. Luis Serrano uses that job as a training example for every new technician who works Conroe.
That’s the difference with Meadowsweet. We don’t just drop in a new furnace and call it done. We look at the whole heating path: the return-air path, the supply runs, the panel capacity, and the way the house actually heats. Only then do we recommend equipment. It’s more work up front, but it’s the only way a furnace repair or replacement in an older Conroe home actually solves the problem.
If your furnace is acting up, call (747) 966-3037. A live person answers around the clock. We’ll schedule a time that works for your family, show up with shoe covers and drop cloths, and hand you a written price before any work starts. Free estimates, no overtime charges, and a 365-Day Done Right Promise on every job. That’s how Conroe homeowners get their heat back without the runaround.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Conroe. Founded in 2004 as part of the Cedarwell family of HVAC companies.