Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across Kenmore
When your furnace quits on a cold Kenmore night, you need a repair crew that knows this valley. Meadowsweet Heating & Air answers every call with a live person, 24 hours a day, and our technicians arrive in Kenmore ready to diagnose and fix the problem, usually with the parts already on the truck. We know the older ranch homes along 68th Avenue NE, the split-levels near Arrowhead, and the newer builds up by Inglemoor, and we understand how this city’s river-valley cold affects furnace performance. Call (747) 966-3037 for service that respects your home, your schedule, and your family.
Why Meadowsweet Heating & Air Is Kenmore’s Preferred Furnace Repair Company
We earn trust in Kenmore one job at a time, with a system built around the Cedarwell Care Promise. That means a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise that stands behind every repair, every time. No runarounds, no fine print.
Our crews work to the C.A.R.E. values: clean up like it’s their own home, ask before moving anything, respect the family’s time and quiet hours, and explain the price before the work. For families with kids and pets, that means shoe covers and drop cloths on every visit, pet-safe product choices, and quiet tools during nap or school hours. We send a photo of the clean-up before the crew leaves, included on every job.
Furnace Repair in Kenmore is not a side line for us. It is what we do every day, across the streets and neighborhoods of this city. And because we are part of the Cedarwell family of HVAC companies, founded in 2004, we carry the parts, training, and nine-brand expertise that older Kenmore homes need. Luis Serrano leads our team with a simple standard: treat every home like it belongs to someone you care about.
Gas Furnace Repair in Kenmore
Gas Furnace Repair in Kenmore often comes down to two things: a furnace running long cycles during the valley’s cold-air pooling nights, and an aging gas valve or ignitor that finally gives out under the extra load. We service Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard systems. A typical gas furnace repair in Kenmore runs $150 to $700, depending on the part and the age of the unit. We give you the written price before we turn a wrench.
Ignitor and Gas Valve Work
Older Kenmore furnaces, many installed in the 1970s and 80s, have ignitors that crack or gas valves that stick after years of damp winters. A cracked ignitor means no ignition and no heat. We replace the part, test the gas pressure, and check the safety circuit before we leave.
Heat Exchanger and Blower Repairs
A heat exchanger under stress from long run cycles can crack, and that is a safety issue we take seriously. If we find a cracked exchanger, we will show you exactly what we saw and explain your options without pressure. Blower motor repair is another common job, especially when a home has been retrofitted with a heat pump and the original blower was not sized for the new static pressure.
Furnace Tune Up in Kenmore
Furnace Tune Up in Kenmore is the single best way to catch a small problem before it becomes a cold-night breakdown. We recommend a tune-up every fall, before the river-valley fog and cold-air pooling really set in. A tune-up in Kenmore runs $80 to $200, and it includes a written report of what we actually found, with photos. Our technicians are not paid on what they sell, so the recommendations you get are honest.
What a Tune-Up Includes
We check the burners, the flame sensor, the gas pressure, the blower motor, the capacitor, and the thermostat calibration. We also inspect the condensate drain and the heat exchanger for early signs of stress. If we find something that needs attention, we will give you the price before any repair work begins.
Why Kenmore Homes Benefit More
Because Kenmore sits low in the Sammamish River valley, furnaces here run longer and harder on clear winter nights than they do a few miles inland. That extra runtime accelerates normal wear. A cracked heat exchanger or a marginal capacitor will show up faster here. A fall tune-up is cheap insurance against a January failure.
Trusted Brands We Service in Kenmore
We service furnaces from Rheem, York, Daikin, Bryant, and five other leading manufacturers, and we keep common parts stocked for fast turnaround in Kenmore. That matters when you have no heat and a forecast calling for overnight lows in the 20s. Whether your furnace is a Bryant from the 1990s or a newer Rheem installed last year, our technicians arrive ready to diagnose and repair it, not just quote a replacement.
Common Furnace Repair Problems We See in Kenmore Homes
- Flooded condenser coils after river-valley rain events. Along the SR-522 corridor, outdoor units sit low enough that heavy rain can pool around them. Switching a flooded condenser back on before it dries shorts the compressor and often the capacitor, a repair we see every wet season.
- Power-surge damage to control boards and blower motors. Many 1960s-to-80s ranch homes in Kenmore still have original electrical panels never upsized for a modern heat pump’s startup draw. A surge takes out the board, and the furnace stops responding.
- Short-cycling from undersized blowers after heat pump retrofits. Homeowners who swap out baseboard heat for a heat pump sometimes find their furnace short-cycling. The blower motor was not sized for the new static pressure, and the fix is a load calculation, a new capacitor, and thermostat calibration.
- Cold-air pooling driving longer run cycles. Kenmore’s valley floor drains cold air on clear winter nights, so overnight lows run noticeably below Bothell or Kirkland. That extra runtime exposes a cracked heat exchanger or a marginal refrigerant charge much faster than it would a few miles inland.
Pricing for Furnace Repair in Kenmore, WA
Here is what you can expect to pay for furnace work in Kenmore. These are the ranges we quote, and we give you the written price before any work starts.
| Service | Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Tune-Up | $80-$200 |
What affects the final number? The part, the age of the furnace, and whether the repair involves the gas valve, ignitor, blower motor, or control board. We never charge overtime for nights or weekends, and estimates are free. Call (747) 966-3037 for an exact quote on your Kenmore furnace.
We Also Serve Cities Near Kenmore
Meadowsweet Heating & Air serves Kenmore and the surrounding communities, including Bothell, Mountlake Terrace, Lynnwood, and Woodinville. If your furnace is acting up and you live just outside Kenmore, call us. We will dispatch a technician who knows this region’s weather and housing stock.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Kenmore
No. Do not flip the breaker back on. A flooded condenser must dry completely before it is powered on, or the compressor and capacitor can short. Call (747) 966-3037. We will inspect the unit, dry the electrical components, and test it safely before restarting it.
Because Kenmore sits at the confluence of the Sammamish River and Lake Washington, cold air pools here on clear winter nights, driving longer run cycles and exposing weaknesses faster than in Bothell. Short-cycling often points to an undersized blower, a failing capacitor, or a thermostat calibration issue. We diagnose the exact cause and fix it.
For many Kenmore homes built in the 1960s through 80s, surge protection is a smart investment. Those original electrical panels were not designed for modern HVAC startup draws, and a power surge can take out a control board. A surge protector on the furnace circuit is inexpensive insurance. Call us for a recommendation based on your panel and furnace.
Not always. Many Kenmore ranches have baseboard circuits that were never designed for a heat pump’s startup draw, and the ductwork may not be code-compliant either. We start with an electrical panel audit and a load calculation before recommending any equipment. That way you know the real cost before the work begins.
Once a year, every fall. Kenmore’s damp river-valley air and long winter run cycles accelerate wear, so a yearly tune-up catches problems early. It costs $80 to $200 and includes a written report. Call (747) 966-3037 to schedule yours before the first hard freeze.
Furnace trouble in Kenmore? Call Meadowsweet Heating & Air at (747) 966-3037 for a free estimate. A live person answers, 24/7, and we will have a technician on the way. Written price before any work starts, shoe covers and drop cloths on every visit, and the 365-Day Done Right Promise behind every repair.
Written by Luis Serrano, owner at Meadowsweet Heating & Air, serving Kenmore and the surrounding communities.







Before
After
Before
After
Before
After