Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Richardson
When your furnace stops heating a house in Richardson, the fix usually costs between $150 and $700, and most repairs can be finished the same day. Our crews know the slab-on-grade ranch homes in Canyon Creek, the split-levels near Campbell Road, and the larger lots west of US-75 that don’t show up on a generic service map. If your heat is out right now, call us at (747) 966-3037 and a live person will answer. We’ll give you a written price before any work starts, so there’s no guessing about what the repair will cost.
Why Meadowsweet Heating & Air Is Richardson’s Preferred Furnace Repair Company
We’re part of the Cedarwell family of HVAC companies, founded in 2004, and every job we take on in Richardson is backed by the Cedarwell Care Promise. That means a written price before any work starts, background-checked uniformed technicians, and a 365-Day Done Right Promise. If something isn’t right, we make it right. No runarounds, no fine print. Homeowners in Richardson tell us the same thing again and again: the crew showed up on time, laid drop cloths across the living room carpet, and sent a photo of the cleanup before pulling out of the driveway.
Luis Serrano leads our service team, and he holds technicians to the C.A.R.E. values code on every call: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. Those aren’t suggestions. They’re the standard. When we send a technician to a home near Arapaho Road or into the Telecom Corridor neighborhoods, that person shows up in a uniform with shoe covers in hand. If your kids are napping or your dog is anxious, we work quietly. Many of our Richardson customers have never had an HVAC company do that before.
Richardson isn’t Plano or Garland. The housing stock, the soil, and the way the city laid out its utilities all shape what breaks and when. That’s why our Furnace Repair team carries parts for both natural gas and propane systems, plus control boards for heat pumps that older ranch homes around Canyon Creek and the west side often rely on. We dispatch from the Dallas-Fort Worth office, and crews serve Richardson locally, so a no-heat call in the middle of a February cold snap doesn’t sit in a queue for hours.
Furnace Tune Up in Richardson
A Furnace Tune Up in Richardson typically costs $80 to $200, and it’s the single best way to avoid a furnace failure during the first hard freeze of the season. Every tune-up includes a full inspection of the heat exchanger, burners, ignitor, gas valve, flue, condensate drain, and blower motor, plus a written report of what we found and what we recommend. We check static pressure on ducted systems, because the fiberglass ductboard used in 1960s and 1970s Richardson homes fails in ways that a quick filter change will never catch.
We recommend a tune-up every fall, especially for homes near the Telecom Corridor where families travel for the holidays and don’t want to come home to a cold house. If your furnace hasn’t been looked at in two or three years, the blower motor may already be working harder than it should, and the heat exchanger could be developing hairline cracks. A $150 tune-up finds those problems before they become a $700 repair.
What the technician checks
Our technicians pull the burner assembly and inspect the heat exchanger with a camera, test the flame sensor with a multimeter, and measure temperature rise across the system. They also inspect the condensate drain line with a borescope when the line runs through an exterior wall cavity, because that’s a known failure point in Richardson after hard freezes. Each check gets documented, and you get the full report.
Ductboard and static pressure check
In homes built before 1985, we inspect the return-air plenum in the attic and measure static pressure at the air handler. If the fiberglass ductboard has started to delaminate or the plenum has partially collapsed, the furnace is being starved of return air. That shortens the life of the blower motor and the heat exchanger. A tune-up catches it early.
Emergency Furnace Repair in Richardson
Emergency Furnace Repair in Richardson means a technician at your door within hours when the system fails during a freeze, a gas smell appears, or the carbon monoxide detector goes off. Most emergency repairs run between $150 and $700 depending on the part and the time of night. We answer the phone 24/7 with a live person, not a voicemail tree, and we don’t charge overtime to show up on a weekend or holiday. If your furnace is blowing cold air at midnight on a night when the temperature is dropping below freezing, call (747) 966-3037.
Some failures can’t wait. A cracked heat exchanger can leak carbon monoxide into the house, and a failed ignitor means no heat at all when you need it most. In Richardson, where February 2021’s Winter Storm Uri froze condensate lines and cracked heat exchangers in hundreds of homes, we know what a real cold snap does to these systems.
After-hours response
When you call after hours, a live dispatcher answers and gets your address, then pulls up the nearest Richardson route. We keep common parts on the trucks: ignitors, flame sensors, gas valves, pressure switches, and blower motor capacitors. Most emergency calls are repaired on the first visit.
What to do before we arrive
Turn the furnace off at the thermostat, check that the gas shutoff valve near the furnace is in the on position, and open a window if you smell gas. Don’t try to relight a furnace that has tripped its rollout switch more than once. Then call us. We’ll walk you through what’s safe to check while we’re on the way.
Trusted Brands We Service in Richardson
We service furnaces and heat pumps from Goodman, Rheem, York, and Daikin, among others. Many Richardson homes built in the 1970s and 1980s originally shipped with Rheem or Goodman equipment, and a lot of those original units are still running today or have been replaced with newer York or Daikin systems. We keep common parts for these brands stocked on our trucks and in our local supply chain, so we don’t have to order a control board and make you wait three days for heat. If your furnace is a less common model, we can usually source the part within 24 hours for Richardson addresses.
Common Furnace Repair Problems We See in Richardson Homes
- Collapsed fiberglass ductboard return plenums. In Canyon Creek and similar 1970s subdivisions, we find return-air plenums in unconditioned attics that have delaminated and partially caved in. The furnace starves for air, the blower motor overheats, and the heat exchanger cracks from cycling too hot. Homeowners often replace the outdoor unit first, but the real culprit is a disintegrating 50-year-old duct system baking at 150°F every summer.
- Frozen and split condensate drain lines. Richardson’s winter freezes, especially the hard ones like February 2021, freeze condensate lines routed through exterior wall cavities. When the line splits, water floods the furnace closet, shorts the control board, and soaks the surrounding drywall. We now inspect these lines on every tune-up.
- Propane furnace heat exchangers cracking from oversized loads. On rural-edge Richardson properties where natural gas isn’t available, propane furnaces serving outbuildings or workshops often run against an oversized load that was never load-calculated. The heat exchanger cycles hot and cold more than it should, and over time it cracks.
- Ignitor failure on aging gas valves. Older furnaces with original ignitors tend to fail on the first cold night of the season, when everyone in Richardson turns the heat on at once. We replace ignitors and flame sensors on the same visit, and we check the gas valve for proper pressure while we’re there.
Pricing for Furnace Repair in Richardson, TX
Furnace repair in Richardson runs from $150 for a simple ignitor or flame sensor replacement up to $700 for a blower motor, gas valve, or heat exchanger repair. A tune-up runs $80 to $200. Here’s how that breaks down:
| Service | Typical Price Range in Richardson |
|---|---|
| Furnace Repair | $150-$700 |
| Furnace Tune Up | $80-$200 |
What moves the price up is parts cost and access time. A heat exchanger on a propane furnace with a cracked cell costs more than a flame sensor. A blower motor for a Goodman or Rheem unit is usually in stock locally. A control board for a less common model may need to be ordered. Before any work starts, you get a written price. That’s the Cedarwell Care Promise, and it applies to every job we do in Richardson. Call (747) 966-3037 for a free estimate.
We Also Serve Cities Near Richardson
Our Furnace Repair in Richardson routes also cover Addison, Plano, Garland, and Carrollton. If you live in one of those cities and need service this week, call the same number. We’ll schedule you on the next available route through the area, and the same written-price promise applies.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Richardson
Yes. We service propane furnaces and heat pumps on the larger lots and rural-edge properties around Richardson, including outbuildings and detached workshops. We stock propane-specific parts like gas valves and pressure switches, plus heat pump control boards for brands like York and Daikin. Call (747) 966-3037 to get a written quote, and we’ll send a tech who knows how to size and service systems without natural gas.
Yes, and we see it often in Richardson’s 1960s to 1980s homes. Fiberglass ductboard return plenums delaminate in the 150°F attic and partially collapse, starving the furnace of return air. That drives up static pressure, overheats the blower motor, and causes the furnace to cycle on and off. We can verify with a static pressure test and camera inspection, then rebuild the return. Call (747) 966-3037 for a diagnostic visit.
Richardson’s expansive black clay soil moves with moisture cycles, and homes on slab-on-grade foundations shift slightly over time. That movement stresses duct boot connections, condensate drain lines, and refrigerant line sets. We routinely find furnace closets where the condensate line has pulled away from the slab penetration or the duct boot has separated at the plenum, which causes uneven heating and humidity problems. We check these connections on every furnace repair call in Richardson.
Yes. We service detached workshops, garages, and outbuildings with propane or heat pump furnaces on Richardson’s larger lots. If the furnace in your workshop fails on a cold night, call our 24/7 line at (747) 966-3037 and we’ll route a technician from the nearest available crew. We carry propane furnace parts and heat pump boards on the trucks.
A proper tune-up in Richardson should include a camera inspection of the heat exchanger, a flame sensor and ignitor test, a gas valve pressure check, a condensate drain inspection, a blower motor amp draw test, and a static pressure measurement on ducted systems. We do all of that, plus a written report of what we found and what we recommend. That report is yours to keep, whether or not you schedule a repair. Call (747) 966-3037 to book a tune-up for $80 to $200.
Call Meadowsweet Heating & Air for Furnace Repair in Richardson
If your furnace is down, don’t wait through a cold night. Call (747) 966-3037 and a live person will answer, day or night. We’ll give you a written price before any work starts, send a background-checked uniformed technician, and leave your home cleaner than we found it, with a photo to prove it. Every job is backed by the 365-Day Done Right Promise. If it’s not right, we make it right.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Richardson since the company’s founding year of 2004.