Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Rollingwood
Furnace repair in Rollingwood, TX typically runs between $150 and $700, and most jobs are handled the same day we arrive. If your heat is out during a Diablo wind cold snap, we know exactly how fast Rollingwood temperatures can drop and we dispatch immediately. Meadowsweet Heating & Air has been part of the Cedarwell family since 2004, with a live person answering every call at (747) 966-3037, day or night. We serve Rollingwood homes with the care this community deserves: shoe covers on every floor, drop cloths where we work, and a written price before anything gets touched.
Why Meadowsweet Heating & Air Is Rollingwood’s Preferred Furnace Repair Company
Rollingwood’s housing stock is different from what most HVAC companies expect. These postwar tract homes, built mostly between the late 1940s and the 1960s, were designed around floor and wall furnaces, not central forced-air systems. That means our Furnace Repair team walks into homes where the furnace is in a hallway floor, a closet, or a crawlspace, not a basement utility room. We know where to look, what those systems fail on, and how to keep dust out of a living room while we work.
Every job starts with a written price before work begins. Our technicians are background-checked, uniformed, and trained to the C.A.R.E. values: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. In Rollingwood, where kids do homework in the next room and dogs investigate every toolbox, that standard matters. We send a photo of the clean-up before the crew leaves, every visit, on every job. That’s not an add-on. It’s how the Cedarwell Care Promise works.
Rollingwood homeowners tell us the same thing: other companies either won’t touch a floor furnace or quote a replacement without explaining why repair isn’t viable. We repair first. Luis Serrano leads our team, and his standard is simple: if it’s not done right, we make it right under the 365-Day Done Right Promise. Call (747) 966-3037 and you’ll get a live person, 24 hours a day, including holidays.
Boiler Repair in Rollingwood
Boiler Repair in Rollingwood is a specialized call, and it’s one we handle regularly for homes with hydronic heat, particularly older additions and outbuildings where radiant loops were installed long after the original furnace. The work involves testing pressure, checking the expansion tank, flushing sediment that builds up in East Bay water, and replacing faulty circulator pumps or zone valves. In Rollingwood, a boiler repair typically runs $150-$700, depending on whether we’re addressing a single component or a larger mechanical failure.
Circulator and Zone Valve Work
A failing circulator pump means some rooms get heat and others stay cold. On Rollingwood properties with attached additions or converted garages, zone valves often fail because the original boiler was never sized for the extra loop. We test flow, check the wiring, and explain exactly what needs replacing before touching a single valve.
Pressure and Expansion Tank Checks
East Bay water is hard, and in Rollingwood that means sediment collects in older boilers faster than homeowners expect. Low system pressure or a waterlogged expansion tank can trigger the pressure relief valve to drip. We don’t just replace parts; we check the fill valve, the tank air charge, and the loop condition so the repair holds.
Gas Furnace Repair in Rollingwood
Gas Furnace Repair in Rollingwood covers the full range, from ignitor replacement on a floor furnace to gas valve diagnostics on a mid-century forced-air conversion. Most homes here started with floor or wall furnaces, and when those systems fail, the repair path is different from a standard central unit. A typical gas furnace repair in Rollingwood runs $150-$700, and the county permit requirement on gas-line or venting changes is something we handle for you, not something you discover later.
Ignitor and Thermocouple Replacement
Floor furnaces use standing pilots and thermocouples, and those components fail from decades of dust, moisture, and cycling. We keep ignitors, flame sensors, and thermocouples on our trucks for the most common Rollingwood furnace models, so in many cases the repair happens in one visit.
Heat Exchanger Inspection and Repair
A cracked heat exchanger on a 60-year-old floor furnace is a serious safety issue. We inspect every heat exchanger with a camera, measure for carbon monoxide, and explain clearly whether repair is allowed under current county code or whether replacement is the only safe option. When the repair falls under the 365-Day Done Right Promise, you get that in writing.
Trusted Brands We Service in Rollingwood
Our technicians are qualified to service Trane, Lennox, Goodman, and Rheem, among the nine brands we carry parts for. The 1952 ranch off Rollingwood Drive that sticks with us had a Lennox floor furnace; those units are still everywhere in this neighborhood, and we stock local parts for the models that show up most. That means fewer return trips and a faster turnaround when your heat is out. If your furnace is a Trane from an early conversion, a Goodman in a converted garage, or a Rheem wall unit, we have the diagnostic tools and parts on hand.
Common Furnace Repair Problems We See in Rollingwood Homes
- Short-cycling during Diablo wind events. When the wind shifts and cold air pushes down from the East Bay hills, exposed Rollingwood properties lose heat fast. Furnaces short-cycle because condensate lines freeze or the thermostat struggles to read accurately against the temperature swings. We calibrate and test under real conditions, not a shop floor.
- Heat exchanger cracks in original floor furnaces. These units ran for decades without a load calculation, so the exchanger metal has been stressed far beyond design limits. In a 1950s Rollingwood tract home, this is the single most common safety finding we report.
- Undersized 60-amp panels that stall blower motor repairs. A modern blower motor draws more than the original panel was built for. When we diagnose a blower issue in Rollingwood, we check the panel. If the panel can’t handle the new motor plus the rest of the home’s load, the repair becomes a two-trade job between us and an electrician, and we coordinate that with you.
- Propane and heat-pump conversion complications. Rollingwood has plenty of properties without natural gas. A furnace converted to propane needs different orifices, and a heat pump retrofit needs a proper refrigerant charge. A standard gas repair scope won’t cover those; our team checks fuel type before ordering parts.
Pricing for Furnace Repair in Rollingwood, TX
We don’t pad estimates, and we don’t use vague language to hide a number. Here’s what Rollingwood homeowners can expect:
| Service | Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Boiler Repair | $150-$700 |
What moves the number: the age of your furnace, whether it’s a floor unit or central, whether a county permit is required, and availability of parts for your specific model. The written price you get before work starts covers everything, including shoe covers, drop cloths, and the clean-up photo. Call (747) 966-3037 for a free estimate. No obligation, and a live person answers.
We Also Serve Cities Near Rollingwood
Our crew regularly drives to Houston, San Antonio, Dallas, and Fort Worth for furnace and boiler work. If you’re in one of those cities, the same written-price standard and the same Furnace Repair in Rollingwood care apply to your job. Scheduling is coordinated from our Dallas-Fort Worth office, with crews dispatched to your door.
Serving Rollingwood, TX - Our Local Coverage Area
We’re based in the Rollingwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Rollingwood
Yes, if the repair involves a gas line, venting, or combustion-air change, you need a permit from the Contra Costa County Building Inspection Division, not a city office. This is the single biggest difference between Rollingwood and nearby Richmond or El Cerrito. We handle the permit paperwork, so you don’t have to figure out the county process. If you’re unsure whether your repair triggers a permit, call (747) 966-3037 and we’ll tell you over the phone.
Diablo winds can spike local temperatures 20 to 30 degrees in hours, and exposed Rollingwood properties lose heat through walls and crawlspaces faster than sheltered homes. Your furnace short-cycles because the thermostat is being confused by rapid temperature swings, or because the condensate line freezes in the cold, dry air, or because the blower motor is failing and shutting down on overheat. We diagnose under the actual conditions causing it, not a generic checklist.
Yes. Floor furnaces are what our techs see most in Rollingwood, and we repair ignitors, thermocouples, gas valves, blowers, and heat exchangers on those units every week. When a heat exchanger is cracked, we use a camera and CO testing to show you the problem before recommending a path forward. The 365-Day Done Right Promise covers every repair, and if replacement is the only safe option, we’ll explain that without pressure.
It can. Many Rollingwood homes still run on 60-amp or 100-amp main panels with no spare capacity for a modern blower motor. If your repair requires a blower replacement that draws more than the panel allows, we bring in an electrician and coordinate the whole job. You get one schedule, one written price, and no mid-winter stall. Call (747) 966-3037 and we’ll tell you what your panel can handle before we order parts.
A Rollingwood furnace repair costs $150-$700 for the vast majority of jobs, and a boiler repair runs the same range. The low end covers an ignitor or thermocouple swap; the high end covers a blower motor, a gas valve, or a more involved component replacement requiring a county permit. You’ll get the exact written price before any work starts, and the estimate itself is free.
If your furnace is struggling, or you just want a second opinion from someone who knows Rollingwood’s postwar homes, call (747) 966-3037. We answer live, 24/7. Luis Serrano leads our team, and the Cedarwell Care Promise stands behind every job: written price first, shoe covers and drop cloths inside, and a clean-up photo before we leave.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Rollingwood since 2004.