Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Fast, Reliable Furnace Repair Across South Houston
When your furnace quits on the first cold snap, you need a South Houston AC Repair team that understands this area’s particular set of problems. Furnace repair in South Houston typically runs $150-$700, and most jobs are done same day. Our techs know the post-WWII wood-frame houses off Spencer Highway, the tight attic ductwork on Avenue F, and what Ship Channel air does to a burner assembly. Call (747) 966-3037 and a live person answers, 24 hours a day, even Sunday night when the temperature drops into the 30s.
Why Meadowsweet Heating & Air Is South Houston’s Preferred Furnace Repair Company
South Houston is the only city we serve where a routine furnace repair regularly turns into a combustion-air inspection. That’s not true in Pearland, Pasadena, or anywhere else. The difference is the Ship Channel. Airborne sulfur and chlorine compounds drift over outdoor equipment here year-round, and they corrode gas furnace heat exchangers, flue pipes, and burner assemblies years faster than in suburbs farther from the corridor. Our repair techs arrive already expecting this. They test combustion air, check for heat exchanger scaling, and measure gas pressure on every repair call, not just when the homeowner asks.
Every visit starts with a written price before any work begins. That’s not a promotional deal, it’s the Cedarwell Care Promise. A background-checked, uniformed technician will show up on time, put on shoe covers before stepping inside, lay down drop cloths around the furnace closet, and photograph the clean-up before leaving. No surprises on the invoice. The 365-Day Done Right Promise covers every repair we make. If it’s not done right, we come back and make it right. That’s the whole guarantee.
Gas Furnace Repair in South Houston
Gas Furnace Repair in South Houston is where we see the most direct impact of industrial air chemistry. The burners and pilot assemblies on gas furnaces here clog with fine particulate that drifts off the refineries in Pasadena and Deer Park, causing delayed ignition, flame rollout, and uneven heating. On a 1952 wood-frame house off Spencer Highway, we found a Carrier furnace short-cycling on cold mornings due to surface scaling on the heat exchanger and burners packed with industrial dust. Cleaning the burners, recalibrating the thermostat, and setting the gas pressure fixed it, and the system has run clean through two winters since. That’s the pattern across South Houston: the furnace itself is fine, but Ship Channel air is quietly eating the parts that matter.
A typical gas furnace repair in South Houston runs $150-$700. The low end covers an ignitor replacement or flame sensor cleaning. The high end covers heat exchanger replacement or a gas valve rebuild. Either way, you’ll know the exact price before we touch a wrench.
Heat Exchanger and Burner Scaling
Hydrogen sulfide and chlorine compounds corrode heat exchangers here in 5-7 years on systems that would last 12-15 years elsewhere. If your furnace short-cycles on cold mornings or you smell a faint metallic odor when the blower kicks on, get the heat exchanger inspected. This is a safety issue, not a comfort issue. A cracked heat exchanger can release carbon monoxide into the house. Do not attempt to inspect or repair it yourself. Call a trained professional.
Delayed Ignition and Combustion Air
Burners clogged with industrial particulate cause delayed ignition, which sounds like a small “whump” when the furnace kicks on. Over time, that stresses the heat exchanger and can crack it. We clean burners and test combustion air on every gas furnace repair in South Houston. It’s standard practice here.
Furnace Tune Up in South Houston
A Furnace Tune Up in South Houston isn’t optional the way it might be in neighborhoods upwind of the Ship Channel. The airborne sulfur compounds, VOCs, and industrial particulates that shorten coil life also accelerate wear on burners, flame sensors, and heat exchangers. We recommend a tune-up every fall, before the first hard cold front, because that gives us time to find scaling and corrosion before it becomes a cold-morning breakdown. A furnace tune-up in South Houston runs $80-$200 and takes about an hour.
Combustion Check and Burner Cleaning
We clean the burners, inspect the flame sensor, test gas pressure, and check the draft on the flue. On South Houston homes, this is where we find industrial particulate buildup. Catching it early prevents a $400 repair in January. The written report tells you exactly what we found and what we recommend, with prices for each line item, before you decide anything.
Static Pressure and Blower Check
South Houston’s post-WWII homes were built before central air was standard, so the ductwork was retrofitted into tight attics never designed for it. That creates high static pressure, which starves airflow and stresses the blower motor and limit switch. During a tune-up, we measure static pressure and adjust the blower speed if needed. This isn’t something every HVAC company checks on a routine tune-up, but in South Houston it’s essential.
Trusted Brands We Service in South Houston
We service nine leading furnace brands, including Goodman, Rheem, and Daikin, and we stock common repair parts locally so South Houston customers aren’t waiting on a warehouse delivery. Whether your furnace is a Rheem from the 1990s or a Daikin installed five years ago, our techs arrive with the parts they’re most likely to need in this city: flame sensors, ignitors, gas valves, and blower capacitors. Luis Serrano, who leads our South Houston service team, has spent years diagnosing furnaces exposed to Gulf Coast humidity and Ship Channel air, and he trains every tech to test combustion air as a matter of routine.
Common Furnace Repair Problems We See in South Houston Homes
- Heat exchanger scaling from Ship Channel sulfur and chlorine compounds. Corrosion appears in 5-7 years here rather than 12-15, which means we inspect heat exchangers on every repair call. If you’re hearing a metallic rattle or seeing short-cycling, this is the likely cause.
- Burner and pilot fouling from industrial particulate. Fine dust drifts over South Houston year-round and settles into combustion air intakes. Clogged burners cause delayed ignition and uneven heating, especially in smaller post-WWII homes where the furnace closet is tight.
- Blower motor strain from retrofitted ductwork. Homes built in the 1940s through 1960s had central air added later, often with undersized ducts in 150°F attics. High static pressure stresses blower motors and trips limit switches, especially on undersized systems.
- Corroded flue pipes and venting. The same compounds that eat heat exchangers also corrode metal flue pipes. We check venting on every repair because a compromised flue is a carbon monoxide risk.
Pricing for Furnace Repair in South Houston, TX
Furnace repair in South Houston runs $150-$700, depending on what’s failed. A gas furnace tune-up runs $80-$200. Here’s the line-item breakdown so you can plan before calling:
| Service | Typical Price Range in South Houston |
|---|---|
| Gas Furnace Repair | $150-$700 |
| Furnace Tune-Up | $80-$200 |
What affects the price: whether it’s an ignitor, flame sensor, gas valve, blower motor, or heat exchanger; how accessible your furnace closet is; and whether the problem is compounded by corroded venting. Every repair gets a written price before work starts, and the estimate is free. Call (747) 966-3037 and our team will walk you through what’s worth fixing and what isn’t, based on the age and condition of your specific system.
We Also Serve Cities Near South Houston
Our Furnace Repair team also covers Pasadena, Galena Park, Deer Park, and Pearland. If you’re in one of those communities and your furnace is short-cycling or refusing to light, call (747) 966-3037. We’ll send a tech from our South Houston dispatch team, with the same written-price guarantee and the same shoe covers and drop cloths on every visit.
Serving South Houston, TX - Our Local Coverage Area
We’re based in the South Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in South Houston
Your sister’s furnace isn’t breathing Ship Channel air. South Houston sits immediately downwind of the petrochemical corridor, which means airborne hydrogen sulfide, chlorine compounds, and industrial particulates settle into your furnace’s combustion air. Heat exchangers here corrode in 5-7 years compared to 12-15 years in Sugar Land or The Woodlands. It’s not your equipment; it’s your geography. Call (747) 966-3037 to schedule a combustion inspection before cold weather arrives.
Short-cycling on cold mornings is frequently the first sign of heat exchanger scaling or burner fouling, both of which are accelerated by Ship Channel air chemistry. On a furnace off Spencer Highway, we traced short-cycling to surface scaling on the heat exchanger and burners packed with industrial particulate. Cleaning the burners and setting the gas pressure corrected it, but a cracked heat exchanger is a carbon monoxide risk and should be inspected immediately by a trained technician.
Yes, in two ways. First, standing water near ground-level furnace exhaust and fresh-air intakes can introduce moisture into the combustion system, which accelerates corrosion on metal components. Second, humid, waterlogged ground means moisture hangs around longer, and moisture plus industrial particulates is a corrosive cocktail. If your furnace closet or crawlspace has been damp after recent heavy rain, we include moisture and venting checks on every repair call in South Houston.
Every fall, before the first hard cold front. A tune-up runs $80-$200 and includes burner cleaning, flame sensor inspection, gas pressure testing, flue draft checking, blower speed measurement, and static pressure assessment. Given what Ship Channel air does to furnaces here, the fall tune-up is the single most cost-effective way to prevent a January breakdown. Call (747) 966-3037 to reserve a fall tune-up slot before the schedule fills.
We do. South Houston’s post-WWII housing stock frequently has retrofitted ductwork in tight attics, which creates high static pressure that starves the system. On any repair involving airflow issues, we measure static pressure and, where necessary, calculate the load to verify the furnace is correctly sized. It’s part of the Cedarwell Care Promise: we don’t just swap a part, we address the conditions that caused the part to fail in the first place.
Need a live person tonight, not a voicemail queue? Call (747) 966-3037. We answer 24 hours a day, 7 days a week, including holidays. You’ll get a written price before any work begins, a background-checked technician in uniform, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave. That’s how Meadowsweet Heating & Air serves South Houston.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving South Houston since the company’s founding in the Cedarwell family of HVAC companies, 2004.







Before
After
Before
After
Before
After