Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable Furnace Repair Across Arlington
When your furnace quits on a cold January night in Arlington, you need a tech who knows why homes here fail, not someone reading a manual in your driveway. Most furnace repair calls in Arlington run between $150 and $700, and many are fixed same-day. We work on the aging brick ranches, the newer builds off Green Oaks, and everything in between. Call (747) 966-3037 and a live person answers, 24 hours a day, even during a February cold snap when every other company sends you to voicemail.
Arlington homes have a particular way they age. The 1960s through 1980s boom packed this city with single-story brick-veneer construction, and a lot of those furnaces are hitting the point where capacitors fail, blower motors burn out, or original ductwork quietly falls apart in 150°F attics. That’s the work we do every week across Arlington. Our Furnace Repair team knows the difference between a furnace problem and a duct problem, because in older Arlington houses, the two often look identical.
Why Meadowsweet Heating & Air Is Arlington’s Preferred Furnace Repair Company
Luis Serrano leads our team, and he’s built the way we work around something simple: treat the house the way you’d want your own treated. That means a written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up sent before the crew leaves. It’s called the Cedarwell Care Promise, and it’s part of every job we do in Arlington, from a quick ignitor swap in a Kennedale border neighborhood to a full heat exchanger replacement over by Lake Arlington.
Our techs are background-checked and uniformed, and they follow the C.A.R.E. values on every call: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. That matters when you’ve got a sleeping toddler in the back room and a dog who doesn’t love strangers. We name what gets protected: floors, indoor air, routines.
Response time to Arlington is usually same-day for repair calls. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Arlington directly. A live person answers the phone at (747) 966-3037, 24/7. No voicemail queue. If it’s not done right, the 365-Day Done Right Promise means we make it right, no runarounds and no fine print.
Heating Repair in Arlington
Heating repair in Arlington usually costs $150 to $700, depending on whether it’s a failed ignitor, a cracked heat exchanger, a dead blower motor, or a control board that’s no longer reading the thermostat correctly. What we find in Arlington is that the furnace itself is often not the only problem. The city’s housing stock, much of it built between 1960 and 1985, sits on Blackland Prairie clay that moves with the seasons. That movement flexes flue connections, stresses duct boots, and can create cracks that pull combustion gases where they don’t belong.
When a north Arlington homeowner calls about a furnace that won’t stay lit, we don’t just replace the part and leave. We check what caused the failure. An ignitor that keeps cracking often means the burner assembly is out of alignment from years of tiny foundation shifts. A blower motor that burns out repeatedly points to airflow problems downstream, not just a weak motor.
High-Limit Trips From Undersized Returns
Arlington homes from the 1960s and 1970s were often built with return ducts sized for equipment far less powerful than anything sold today. When a modern furnace pushes against that restriction, it overheats and trips the high-limit switch. We measure static pressure on every no-heat call to rule this out before replacing parts that don’t need replacing.
Carbon Monoxide Checks on Every Ticket
Every heating repair visit in Arlington includes a combustion check and carbon monoxide test. Given the age of the equipment in central and south Arlington, and the way clay soil flexes flue connections over decades, we don’t guess on this. If a heat exchanger is cracked, we show you pictures and write you a price before any work starts.
Boiler Repair in Arlington
Boiler repair in Arlington is less common than furnace work, but the homes that have boilers tend to be older ones scattered through central neighborhoods like the area around UTA and the historic districts. Boiler repair here runs $150 to $700 for most issues: failed circulator pumps, faulty zone valves, air-locked radiators, leaking seals, or pressure problems. Boilers don’t move air the way furnaces do, which means they escape the duct failures we see so often in 1960s tract homes, but they bring their own issues with water chemistry and sediment buildup.
When we get a boiler call in Arlington, we’re looking at systems that may be 40 years old and still limping along. The good news is boilers can last a long time with proper attention. The bad news is that neglected ones fail in predictable ways: pressure relief valves that drip constantly, expansion tanks that waterlog, and zone controls that stop responding.
Pressure Swings on Older Systems
Many Arlington boiler systems run on cast-iron radiators and original piping. If the pressure gauge swings wildly or the system loses water, we trace the expansion tank and air vents first. Replacing a circulator pump is usually a same-day fix in Arlington. We carry common parts in our trucks and can source anything unusual within a day.
When a Boiler Is Past Repair
If the heat exchanger in an old boiler has failed, we’ll write up the options honestly. Sometimes the right call is to switch to a modern furnace or heat pump system instead. We’ll give you a written price for both paths and let you decide without pressure. The Cedarwell Care Promise applies either way.
Trusted Brands We Service in Arlington
We service the furnaces Arlington homes actually have: Trane, Lennox, Goodman, and Rheem are the ones we see most on service tickets across the city. When a Goodman from a 2003 build in southeast Arlington needs a new gas valve, we stock that part or can source it same-day from local supply houses. When a Lennox heat exchanger in a north Arlington two-story has failed, we’ll order manufacturer parts and schedule the repair quickly. Our techs are trained across nine major brands including Carrier, York, Daikin, Bryant, and American Standard, but we don’t push one brand over another. We fix what you have.
Common Furnace Repair Problems We See in Arlington Homes
- Failed capacitors and pitted contactors on 15 to 20 year old furnaces. Arlington summers run from June through September with sustained 100°F heat, and your furnace blower motor pushes air the whole time even when the burner isn’t lit. That near-continuous runtime burns out blower motor windings far earlier than the manufacturer’s rating suggests.
- Cracked heat exchangers in 1960s through 1980s units. The clay soil under south and central Arlington shifts seasonally, flexing flue and cabinet connections until metal fatigues. This can allow carbon monoxide to mix with supply air. We check this on every repair visit.
- Tripped high-limit switches from undersized original return ducts. Homes built during Arlington’s population boom, from roughly 44,000 people in 1960 to over 260,000 by 1990, often have returns sized for far weaker equipment. Restricted airflow mimics a failing blower motor or control board, and a 30 to 40 percent airflow loss is common when fiberglass duct board delaminates in 150°F attics.
- Ignitors and flame sensors failing in waves during winter. Sharp cold events like the February 2021 freeze disabled heat pumps and stressed gas furnaces across thousands of Arlington homes. We still see units with damage deferred from that week, and now those components fail at inconvenient moments.
Pricing for Furnace Repair in Arlington, TX
Furnace repair in Arlington runs $150 to $700 for most jobs. A furnace tune-up runs $80 to $200. The spread depends on the part, how old the unit is, and whether the fix requires a follow-up visit for a manufacturer part. Here’s what Arlington homeowners typically pay:
| Service | Typical Arlington Price Range |
|---|---|
| Furnace Repair | $150-$700 |
| Tune-Up | $80-$200 |
You’ll get a written price before any work starts, on every visit, every time. That’s not a promotion, it’s the way we operate. Call (747) 966-3037 for an exact quote. Estimates are free.
We Also Serve Cities Near Arlington
If you’re in Mansfield, Kennedale, Burleson, or Cedar Hill, our furnace team covers those areas too. The same pricing, the same Cedarwell Care Promise, and the same live answer at (747) 966-3037. This page focuses on Arlington, but our repair crews regularly route through the surrounding cities.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Arlington
Because the furnace is usually not the problem. The undersized original return ducts in 1960s and 1970s Arlington tract homes restrict airflow enough to overheat the heat exchanger, which trips the safety limit switch. We were called to a 1972 single-story brick ranch off Pioneer Parkway where the 80,000-BTU Carrier furnace was short-cycling and tripping the high-limit switch. The original flexible duct in the 150°F attic had delaminated and collapsed, spiking static pressure so high the blower motor was pulling only 800 CFM against a 1,200-CFM requirement. After sealing the plenum, replacing the failed run, and confirming the heat exchanger was intact, the system held steady at 0.5 inches of water column with no more limit trips. If a tune-up didn’t fix the problem, ask the next tech to measure static pressure before selling you a new control board. Call (747) 966-3037 and we’ll do exactly that.
No, and you shouldn’t try. In Arlington’s 1960s through 1980s brick ranches, the original ductwork was sized for equipment far less powerful than modern replacements, often 8 SEER era sizing. Putting a larger furnace on undersized ducts creates high static pressure, which burns out blower motors, trips limit switches, and shortens the life of the new equipment. A like-for-like swap often disappoints in an older house because the ducts, not the furnace, are the real bottleneck. We’ll tell you honestly what your duct system can support before we sell you anything. Call (747) 966-3037 for an on-site assessment with actual measurements.
First, check your thermostat batteries and your breaker panel, because those are the two most common post-freeze culprits we see in Arlington. If the thermostat is dark, replace the batteries. If the breaker tripped, reset it once. If the furnace still won’t ignite, the freeze likely damaged a component: a cracked condensate drain line, a failed pressure switch, or a gas valve stuck from moisture intrusion. The February 2021 freeze created a wave of deferred damage across Arlington, and we’re still seeing the tail of it. Don’t keep resetting a furnace that’s not working. Call (747) 966-3037 and we’ll diagnose it same-day.
Yes. Arlington is a fully independent municipality with its own building and permitting department, not a Dallas or Fort Worth suburb, and every furnace replacement requires an Arlington-issued permit and city inspection. Out-of-town contractors routinely skip this step, which leaves the homeowner exposed when a future home inspection flags unpermitted work. We handle the Arlington permit process on every replacement we install, and the final city inspection is part of the job. If a contractor tells you the permit is optional or you don’t want that on record, walk away. Call (747) 966-3037 and we’ll explain the timeline and cost.
Usually because the blower is working against ducts that can’t handle the airflow, and that kills motors early. The Blackland Prairie clay under south Arlington shifts seasonally, which can separate duct boots and create leaks that drop system pressure. Combined with the near-continuous June through September runtime in Arlington’s heat corridor, blower motors on 15 to 20 year old furnaces burn through their windings faster than expected. If you’ve replaced a blower motor more than once, the motor isn’t the root problem. We measure static pressure and inspect every accessible duct run before we put another motor in. Call (747) 966-3037 for a straight answer.
Call Meadowsweet Heating & Air for Furnace Repair in Arlington, TX
When your furnace fails in Arlington, you want a written price before the work starts, a tech in shoe covers who leaves the house the way they found it, and a guarantee that actually means something. That’s the Cedarwell Care Promise, and it’s part of every furnace repair we do in this city. Luis Serrano and the team at Meadowsweet Heating & Air serve Arlington with same-day repair, 24/7 live phone support, and work backed by the 365-Day Done Right Promise. Call (747) 966-3037 now for a free estimate. A live person answers, every time.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Arlington, TX with furnace repair and the Cedarwell Care Promise since 2004.