Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Dallas
A new AC installation in Dallas runs $3,500 to $7,500 for most homes, and the job typically takes one full day when the existing ductwork is sound. We respond to Dallas calls within hours, not days, because summer here doesn’t wait. If your system has failed or you’re planning ahead for the 20-plus days above 100°F that Dallas sees every year, call (747) 966-3037 for a written quote before any work begins. Our crews know the 1980s-2000s slab-on-grade homes across Far North Dallas, Oak Cliff, and East Dallas, and we size every system for the attic heat that defines this market.
Why Meadowsweet Heating & Air Is Dallas’s Preferred AC Installation Company
Dallas homeowners call us because Luis Serrano has built the Meadowsweet team around a simple standard: the home should look and feel the same when we leave as it did when we arrived, except cooler. Every tech is background-checked and uniformed. Every visit includes shoe covers, drop cloths, and a photo of the clean-up sent before the crew pulls away. That’s the Cedarwell Care Promise, and it’s not an upsell. It’s the way we’ve worked since 2004.
Families in Preston Hollow, Lakewood, and the M Streets tell us the same thing: what matters after the install is whether the floors stayed clean, whether the kids could nap through the work, and whether the price on the invoice matches the quote. We protect all of that. A live person answers our phone 24/7, including weekends. If you call at midnight in July because a capacitor failed on the hottest day of the year, a real human picks up.
Our AC Installation team carries parts for Trane, Lennox, Goodman, and Rheem on the truck, which means fewer return trips for Dallas customers. The 365-Day Done Right Promise means if something isn’t right after the install, we make it right. No runaround, no fine print.
HVAC Installation in Dallas
HVAC Installation in Dallas means more than swapping a condenser. It means accounting for an attic that hits 140-160°F by early afternoon, a slab that moves seasonally on Blackland Prairie clay, and a cooling load that runs nearly eight months of the year. The job starts with a load calculation, not a square-footage guess. Then we replace or seal the ductwork, set the new equipment, charge the refrigerant to manufacturer spec, and verify airflow at every register. A full HVAC installation in Dallas runs $3,500 to $7,500 depending on system size, efficiency tier, and whether ductwork needs replacement.
Duct Sealing Before the New System
Before any new condenser or evaporator coil goes in, we inspect the flex-duct connections at the plenum collar and floor registers. Dallas clay heaves and settles, and we routinely find collars that have separated enough to dump conditioned air into the attic. If we install new equipment without catching that, the new system gets blamed for a leak that predates it.
Attic Ventilation and SEER2 Selection
A new SEER2-rated system in a Dallas attic performs differently than the same unit in a basement market. We account for the unconditioned attic cavity in the efficiency calculation and often recommend sealing the duct runs before chasing a higher SEER2 tier. The right spec in Dallas is the one that holds up when the attic is 150°F and the thermostat is set to 74°F for the fourth straight month.
Heat Pump Installation in Dallas
Heat Pump Installation in Dallas works best on properties where natural gas isn’t available or where the homeowner wants to pair electric cooling with a propane backup for hard freezes. Dallas sits in the central Texas freeze corridor, and February 2021 proved that cooling-first equipment needs a reliable heating partner when temperatures drop below 20°F. A heat pump install in Dallas typically runs $3,500 to $7,500, matching standard AC installation, and can be configured with auxiliary heat for rural and exposed sites.
Propane and Dual-Fuel Setups
On a rural acreage outside Mesquite with no natural gas at the meter, we installed a Carrier heat pump paired with a propane-fired auxiliary furnace so the homeowners had a backup for hard freezes like Uri. That dual-fuel approach matters on exposed properties without gas service, where the heat pump handles the shoulder seasons and the propane furnace takes over when cold air settles in.
Exposed Properties and Wind Shelter
Rural Dallas-area lots often lack the wind shelter that dense neighborhoods provide, which changes the sizing math. A system sized off square footage alone will struggle on an unshielded west wall that absorbs full afternoon sun. We run the load calculation with exposure factored in, and we set the outdoor unit on a composite pad clear of the clay movement that Dallas slabs experience.
Trusted Brands We Service in Dallas
Meadowsweet Heating & Air installs and services equipment from Trane, Lennox, Goodman, and Rheem, among others. We stock common parts for these brands on our trucks, which means Dallas customers aren’t waiting on a warehouse shipment when a capacitor or contactor fails in August. Our techs train on these systems regularly, and we write the price before any work starts, regardless of which brand sits outside your home. If you’re replacing an old Goodman with a new Rheem, or swapping a builder-grade Lennox for a higher-efficiency Trane, we’ll give you an honest read on what the change actually buys you in Dallas’s climate.
Common AC Installation Problems We See in Dallas Homes
- Separated flex-duct collars from slab heave. Dallas’s Blackland Prairie clay expands in wet winters and contracts in dry summers, and the slab movement routinely separates duct connections at the plenum and floor registers. A new install must catch this before startup or the new system gets blamed for a pre-existing leak.
- Attic temperatures destroying duct integrity. Flex-duct runs through unconditioned attic cavities that hit 140-160°F by mid-afternoon. Old duct insulation breaks down under that sustained heat, and the cooled air leaks into the attic instead of reaching the bedrooms.
- Sizing by square footage instead of load calculation. A 2,000-square-foot house in Far North Dallas doesn’t always need the same tonnage as a 2,000-square-foot rural property outside Irving. Exposure, window orientation, and duct condition all change the load. Guesswork here costs years of short cycling and humidity control problems.
- No freeze backup on cooling-first systems. Dallas properties without natural gas often have aging electric furnaces or strip heat that can’t hold the house above 60°F during a hard freeze. When we install a new system, we ask about the freeze-corridor risk and spec propane or heat-pump backup where the property needs it.
Pricing for AC Installation in Dallas, TX
A new AC installation in Dallas runs $3,500 to $7,500. Heat pump installation falls in the same range. A tune-up costs $80 to $200. What moves the price: the SEER2 tier you choose, whether ductwork needs replacement, and whether the property needs propane or dual-fuel configuration. Here’s the breakdown:
| Service | Dallas Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| Heat Pump Installation | $3,500 - $7,500 |
| Tune-Up | $80 - $200 |
These are the numbers we quote across the Dallas market, and we write them down before any work starts. Call (747) 966-3037 for a free estimate on your specific property. We’ll come out, run the load calculation, and hand you a written price you can sleep on.
We Also Serve Cities Near Dallas
Meadowsweet Heating & Air serves Dallas and the surrounding communities including AC Installation in Dallas, Irving, Duncanville, Balch Springs, and Mesquite. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Dallas locally every day. If you’re outside the city limits but still in the metro, call and ask. We likely have a truck nearby.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Dallas
Yes. For properties without natural gas, we install heat pumps with propane auxiliary heat or dual-fuel setups that pair an electric heat pump with a propane furnace for hard freezes. We spec this based on the property’s exposure and the freeze-corridor risk Dallas sees most winters. Call (747) 966-3037 and we’ll walk the property to recommend the right configuration.
Yes. We serve Dallas and the surrounding communities including Irving, Duncanville, Balch Springs, and Mesquite, plus rural acreages in between. Our crews run these routes daily, and the written-price-before-work standard applies everywhere we go. If you’re unsure whether your property is in our service area, call (747) 966-3037. A live person answers.
Because Dallas attics routinely hit 140-160°F in summer, and nearly all local ductwork runs through that unconditioned space. If the flex-duct connections have separated from the plenum collar, which happens often on Dallas’s shrink-swell clay, your new system will dump cooled air into the attic and you’ll pay for it every month. We inspect and seal ducts before installing new equipment, not after.
Most Dallas homeowners get the best long-term value from a SEER2 rating in the 14-16 range, but the real efficiency gain comes from sealing the ductwork in the 140°F attic first. A higher SEER2 tier pays off faster when the ducts aren’t leaking. We’ll run the numbers for your specific house and give you a written price for each option. Call (747) 966-3037 for that quote.
Yes. We install mini-split systems for detached workshops, outbuildings, and garage conversions across the Dallas area. The system gets sized for the structure’s exposure and insulation, not just its square footage, because an unshaded metal building in Dallas needs a very different load than an attached garage. We’ll spec it properly and write the price before any work starts.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Dallas and the surrounding metro since 2004.