Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Arlington
New AC installation in Arlington, TX typically costs between $3,500 and $7,500 for a complete system replacement or first-time install, depending on home size, equipment efficiency, and ductwork condition. Most Arlington families can expect a written fixed quote before any equipment is ordered. We install and service equipment from Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, and our crews work in Arlington neighborhoods every week. Call (747) 966-3037 for a free estimate on your Arlington AC installation.
There is a specific reason Arlington homes need more careful equipment selection than houses ten miles west in Fort Worth. Our condenser cabinets and coils sit in Gulf-moisture humidity that spikes after every summer thunderstorm. That humidity settles on outdoor units, condenses overnight, and accelerates corrosion on coil fins and cabinet paint. The same system that would last 15 years in a drier climate can start shedding coil fin material in 8 or 9 years here. We plan for that on every Arlington AC Installation by recommending coated condenser coils and corrosion-resistant cabinets where the home’s orientation and location make them worth the added cost.
Why Meadowsweet Heating & Air Is Arlington’s Preferred AC Installation Company
Luis Serrano leads our Arlington crews, and he has spent enough time in attics across south and central Arlington to know what a 1970s brick ranch needs versus a 1990s two-story off Green Oaks. We pull Arlington-issued permits on every replacement and schedule the city inspection ourselves. We do not skip that step. Out-of-town contractors sometimes do, and the homeowner finds out only when a future resale inspection or code review flags the unpermitted work.
Every Meadowsweet job includes the Cedarwell Care Promise. That means a written price before any work starts, background-checked uniformed technicians, shoe covers and drop cloths inside your home, and a photo of the clean-up sent before the crew leaves. It is a system, not a request. Our techs follow the C.A.R.E. values code: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work. Families with kids and pets notice the difference, especially when a crew works quietly during nap hours and keeps drop cloths over play areas near the air handler closet.
A live person answers our phone 24 hours a day, 7 days a week, including nights and weekends. No voicemail queue. If your AC goes down during a July heat wave, you will talk to a person on the first ring.
Furnace Installation in Arlington
Furnace installation in Arlington runs $3,500 to $7,500 for a complete furnace and coil replacement, and it is the right move when your existing furnace is over 15 years old, requires repeated repairs, or struggles to hold temperature during the sharp winter snaps that hit Tarrant County. Arlington homes see both extremes: 100°F summer afternoons and the kind of February freeze that stressed thousands of systems in 2021. A furnace that is limping along will fail exactly when you cannot afford a cold night with kids in the house.
Signs It Is Time
A yellow flame instead of blue, visible rust around the burner compartment, or a heat exchanger that triggers repeated flame-sensor faults all point toward replacement. When a furnace is paired with an old R-22 air conditioner, it is often more cost-effective to replace both together as a matched system. The paired install usually lands in the lower end of the combined range because the labor is done once, the permit is pulled once, and the duct connections are sealed once.
What the Job Includes
We size the furnace with a manual-J load calculation, check static pressure after install, and verify gas-line connections with a leak test before leaving. Arlington’s older tract homes often have undersized returns, so we measure those. If the return cannot move enough air for a modern 80% or 95% AFUE furnace, we will tell you before any equipment is purchased, not after.
HVAC Installation in Arlington
HVAC installation in Arlington means replacing the full heating and cooling package, and the honest price range for complete split-system work here is $3,500 to $7,500 for a straightforward change-out with existing ductwork. That is the number we quote and stand behind. Larger homes, zoning systems, or duct replacement push closer to the top of that range, and we explain exactly why in the written estimate.
Why Full-System Replacement Makes Sense in Arlington
Because Arlington’s summer load runs nearly continuously from June through September, a mismatched or partially replaced system works against you every single afternoon. The Blackland Prairie clay under this part of Tarrant County shifts with seasonal moisture, and that movement stresses duct boot connections under slab homes. A new condenser or air handler installed without checking those supply runs can lose 30 to 40 percent of its capacity through separated ducts in crawl-accessible areas. We check them. A full HVAC install lets us seal those leaks at the same time.
Load Calculation First
We never replace ton-for-ton without measuring the house. A 1970s single-story brick ranch off Pioneer Parkway might have been sized for far less insulation than it has now, or a 1980s two-story might have wider solar exposure on the west side. The manual-J load calculation tells us what the house actually needs. That single step prevents short-cycling, humidity problems, and electric bills that never dropped after the install.
Trusted Brands We Service in Arlington
We service and install equipment from nine major brands, but in Arlington we most often recommend Trane, Lennox, and Goodman units paired with coated condenser coils. Trane and Lennox offer factory corrosion-resistant coil options that hold up measurably better in Gulf-moisture air, and Goodman delivers strong value on budget-conscious replacements where the homeowner plans to stay for five to eight years. We keep common parts for these brands staged in our DFW metro office, which means faster turnaround when an Arlington install needs a specific blower motor or control board mid-job. We have a Rheem option available as well for homeowners who prefer it.
Common AC Installation Problems We See in Arlington Homes
- Corroded condenser coils on south-facing units. Arlington’s post-thunderstorm humidity sits on coil fins overnight, and units placed against a south-facing brick wall bake in the afternoon sun. The combined heat-and-moisture cycle eats aluminum fins years faster than manufacturers rate them for drier climates. A coated coil is not an upgrade here; it is often the difference between 8 and 14 usable years.
- Unpermitted installs from previous replacements. Arlington has its own building and permitting department, separate from Dallas or Fort Worth. A homeowner who bought a house with a 6-year-old system might discover there was never a city inspection. That surfaces during resale disclosures or when a code complaint is filed. We pull the permit and schedule the inspection as part of our standard install.
- Delaminated fiberglass duct board in 1960s-1980s attics. In older neighborhoods flanking Pioneer Parkway and South Collins Street, original fiberglass duct board partially collapses inside attics that hit 150°F in July. That material’s rated upper limit is exactly there. The result is 30 to 40 percent conditioned-air loss that homeowners blame on the equipment. A new AC install without addressing that duct failure just pushes expensive cold air into a hot attic.
- Undersized returns on tract-home floor plans. Many single-story brick homes built between 1960 and 1985 were designed with single central returns in a hallway. Modern high-efficiency systems need more return air than those old grilles can move. If we do not enlarge the return during the install, the new system will run louder and cycle poorly. We check this on every Arlington estimate.
Pricing for AC Installation in Arlington, TX
Here are the price ranges you should expect for common install work in Arlington, TX. These are written in dollars because families plan around real numbers, not vague talk.
| Service | Arlington Price Range |
|---|---|
| AC Installation | $3,500 - $7,500 |
| Furnace Installation | $3,500 - $7,500 |
| Tune-Up | $80 - $200 |
What moves the price of an Arlington AC Installation in Arlington up or down? Home square footage, the SEER2 rating you choose, whether ductwork needs repair or replacement, and whether you opt for a coated condenser coil. The coated coil typically adds a few hundred dollars to the equipment cost and is worth it on any unit exposed to Gulf-moisture air without shade coverage. We give a written fixed price before any work starts. Call (747) 966-3037 for a free estimate.
We Also Serve Cities Near Arlington
Our Arlington crews also run installation jobs in Mansfield, Kennedale, Burleson, and Cedar Hill. The same permit process, the same written pricing, and the same C.A.R.E. values follow us to each of those cities. If you are near the Arlington line and have been putting off a replacement, we will come take a look.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Arlington
Yes, in most cases. Arlington’s Gulf-moisture humidity after summer thunderstorms condenses on outdoor coil fins nightly, and that moisture plus heat shortens the life of uncoated aluminum coils by several years compared to drier inland metros. The coated-coil upgrade usually costs a few hundred dollars and is the single best longevity purchase for an Arlington outdoor unit. Call (747) 966-3037 and we will check your specific location and sun exposure before recommending it.
Yes. Arlington operates its own building and permitting department, and every HVAC replacement requires an Arlington-issued permit and a city inspection after the install. We pull the permit, schedule the inspection, and we do not consider the job done until the inspector signs off. Call (747) 966-3037 if you are unsure whether a previous install on your home was permitted.
Twice a year, at minimum. Arlington’s humidity and airborne clay dust from Blackland Prairie soil combine to coat coil fins faster than the standard once-a-year tune-up interval assumes. A spring rinse before cooling season and a late-summer rinse after the dustiest months keeps your equipment breathing. We include coil cleaning as part of our $80 to $200 tune-up, and we will show you the before-and-after.
If your current system is over 12 years old, a new install with a 15 to 17 SEER2 rating will typically drop your summer cooling cost by 20 to 40 percent. However, if the duct leaks are not addressed, you will not see the full savings. We check the ductwork during the estimate and include sealing recommendations in the written quote. Call (747) 966-3037 for a free home evaluation.
14.3 SEER2 is the federal minimum, but for Arlington’s June-through-September run times we typically recommend 15 to 17 SEER2. The higher efficiency pays back faster here because your system runs more hours per year than in most U.S. climates. Above 17 SEER2, the added cost often outruns the savings unless you plan to stay in the house for 15 years or more.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Arlington since the company was founded in 2004 as part of the Cedarwell family of HVAC companies.