Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Everman
AC installation in Everman typically costs $3,500-$7,500 for a standard split system retrofit, and most jobs are completed in one to two days once equipment arrives. We work throughout Everman’s 1.7 square miles, from the streets off E Enon Avenue to the neighborhoods around Johnson Park, and we know exactly what these 1950s-1980s ranch homes need. Call Luis and the team at (747) 966-3037 for a written quote before any work begins.
Why Meadowsweet Heating & Air Is Everman’s Preferred AC Installation Company
Everman homeowners call us because we understand that installing AC here is not like installing AC in a new suburb. Nearly every house in Everman sits on a slab foundation built between 1950 and 1985, with attic-routed ductwork that has survived decades of Texas heat. Our AC Installation team has replaced systems on Race Street, along E Enon Avenue, and in the quiet blocks south of Fuller Avenue. What that means for you is simple: we show up knowing your house’s construction era before we ring the doorbell.
Every job we do in Everman runs on the Cedarwell Care Promise. That means a written price before any work starts, background-checked uniformed technicians, shoe covers and drop cloths on every visit, and a 365-Day Done Right Promise. If the installation is not done right, Luis Serrano will make it right. No runarounds, no fine print, no pressure. A live person answers our phone 24/7, including weekends and holidays, because an overheated house in a Texas July does not wait for Monday.
What we hear from Everman families is that they want a crew who treats their home like a home, not a job site. We protect floors with drop cloths, ask before moving anything, keep tools quiet during nap hours, and send a photo of the clean-up before we leave. That is not an upsell. It is just how we work.
Furnace Installation in Everman
Furnace Installation in Everman usually happens in one of two scenarios. Either the existing gas furnace has finally outlived its 20 to 25 year service life, or a homeowner is replacing an aging AC and furnace together to avoid two separate labor charges. In Everman’s ranch houses, paired furnace and AC replacement typically runs $3,500-$7,500, depending on furnace efficiency and duct modifications.
Matched Systems for Slab Homes
Most Everman homes have gas furnaces from the same era as the original AC. When the furnace goes, the smart move is often to replace both at once, because a new high-efficiency furnace paired with a mismatched old AC wastes efficiency and can strain the blower. We walk through the pairing logic in plain language and show you the written price before any work starts.
Quiet Operation Matters Here
Everman’s houses are close together, and many have bedrooms near the mechanical closet. We size furnaces with sound in mind and adjust blower settings so the system does not rattle the walls or wake a sleeping child at 2 a.m. It is a small thing that makes a real difference in a small house.
HVAC Installation in Everman
HVAC Installation in Everman almost always means retrofit work into existing attic ductwork, not new-construction placement. The city is landlocked by Fort Worth and essentially built out, so our crews are constantly adapting modern equipment to homes that were framed when Jimmy Carter was president. A full HVAC system replacement with duct improvements in Everman runs $3,500-$7,500.
Retrofit Over Replacement
What we bring to Everman is retrofit expertise. The difference between a good install and a bad one here is whether the tech understands what 140°F attic heat does to old flex duct, and whether they check static pressure before charging the system. We do both, on every job.
Load Calculations, Not Guesswork
Small ranch floor plans with poor wind shelter do not need oversized equipment. We run a Manual J load calculation on every Everman install, because an oversized system short-cycles, never dehumidifies, and leaves the house clammy. The right size is the one the numbers support, not the one that looks bigger on a brochure.
Trusted Brands We Service in Everman
Meadowsweet Heating & Air installs and services equipment from Rheem, York, Daikin, and Bryant, among nine leading brands. For Everman customers, that means we can match the right brand to your budget and your home’s ductwork without pushing you toward one manufacturer. We carry common parts for these systems in our DFW-area stock, which shortens turnaround when a replacement component is needed mid-install. If your existing system is a Rheem, a York, a Daikin, or a Bryant, we likely have the part on hand or can get it fast.
Common AC Installation Problems We See in Everman Homes
- Clay-soil plenum separation: Everman’s expansive Blackland Prairie clay heaves seasonally, and on slab foundations that shift, the supply plenum can pull loose from the duct boot at the slab penetration. The leak sits hidden under flooring and only shows up on a static pressure test until your summer energy bill quietly climbs.
- Collapsed attic flex duct: Attics in Everman routinely exceed 140°F in July. Original first-generation flex duct breaks down under that heat, and when return ducts collapse under negative pressure, they pull superheated attic air into the system. Your AC runs constantly and still cannot hold temperature.
- Oversized equipment from old tonnage matching: A lazy installer matches new equipment to whatever tonnage the old unit had. In Everman’s small, exposed ranch homes, that often means an oversized system that short-cycles and leaves the house humid. We run a load calculation every time.
- R-22 refrigerant phase-out issues: Many Everman homes still run R-22 systems from the 1980s and 1990s. When those fail, you cannot simply retrofit them; the refrigerant is too expensive and the system is past its service life. We explain exactly what you are looking at and give you a written replacement price.
Pricing for AC Installation in Everman, TX
Here is what you should plan for in Everman. A standard split-system AC installation with a 14-16 SEER2 efficiency rating runs $3,500-$7,500. A furnace installed alongside the AC falls in the same $3,500-$7,500 range when done as a paired replacement. What moves the number is your home’s duct condition, the efficiency level you choose, and whether we need to replace plenum connections or sections of collapsed flex duct.
| Service | Typical Price Range in Everman |
|---|---|
| AC Installation (standard split system, retrofit) | $3,500-$7,500 |
| Furnace Installation (paired with AC replacement) | $3,500-$7,500 |
We give every Everman homeowner a written price before any work starts. No estimate roulette, no surprises on the invoice. Call (747) 966-3037 and Luis will walk through what your specific home needs, and what it will cost, in plain numbers.
We Also Serve Cities Near Everman
Beyond our work in AC Installation in Everman, our crews serve families in Houston, San Antonio, Dallas, and Fort Worth. The same Cedarwell Care Promise applies no matter which city we are in. If you live in one of those nearby areas and need a written price on a new system, the number is the same: (747) 966-3037.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Everman
Yes, and in fact many Everman homes are ideal candidates for a heat pump. A modern cold-climate heat pump, like a 14.3 SEER2 Carrier or Rheem unit, handles both summer cooling and winter heating without any gas line. For Everman’s small ranch floor plans, a properly sized heat pump can be more efficient than a gas furnace paired with an older AC, especially after the February 2021 Uri freeze showed how vulnerable Texas gas infrastructure can get. Call (747) 966-3037 and we will run a load calculation and show you the heat pump math for your specific home.
Not always, but often yes. Original first-generation flex duct in a 1950s-1980s Everman ranch has usually deteriorated in 140°F attic heat to the point where the inner liner is separated or the duct collapses under return pressure. If your static pressure test shows poor airflow, replacing the worst sections of duct is the only way a new AC can perform at its rated efficiency. We will show you photos of what we found and give you a separate line item for duct replacement, so you decide what gets done. Call us at (747) 966-3037 and we will check it before recommending anything.
For most Everman homes, a 14 to 16 SEER2 system is the sweet spot. You get meaningful efficiency gains over a 10 SEER unit from the 1990s without paying the steep premium for 18+ SEER2 equipment that pays back slowly in a small house. The more important number in Everman is not the SEER2 on the box, it is the static pressure in your ductwork. A 16 SEER2 system with bad ducts cools worse than a 14 SEER2 with good airflow. We will help you spend where it counts.
We treat it as a critical repair, not an upsell. In Everman’s slab homes, clay-soil heave regularly separates the supply plenum from the duct boot at the slab penetration, and the leak runs silently under your flooring. Our techs find it with a static pressure test, then fabricate a new plenum with flexible connectors and seal both boot joints before connecting the new system. If we skipped this step, your new AC would leak conditioned air into the slab void and your energy bill would never drop. We will not skip it.
Yes, we do. Many Everman properties have detached garages, workshops, or hobby outbuildings that need cooling but cannot justify a full central system. A ductless mini split is usually the right answer: quiet, efficient, and sized to the specific room. We install single-zone and multi-zone systems from brands like Daikin and Bryant, and we will give you a written price for the exact room dimensions before any work starts. Call (747) 966-3037 for a free estimate on cooling your workshop.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Everman. Part of the Cedarwell family of HVAC companies, established in 2004.