Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Before
After
Before
After
Before
AfterFast, Reliable AC Installation Across Selma
AC installation in Selma typically runs $3,500-$7,500 for a complete system, and the biggest variable isn’t brand name. It’s whether your home still carries the original 1950s-1980s ductwork sized for a swamp cooler instead of refrigerated air. That legacy ducting is the single most common reason a brand-new unit underperforms in Selma, and it’s why we start every install with a real load calculation and a static pressure reading, not a guess based on square footage. If you’re planning to replace or add central air in Selma, call Meadowsweet Heating & Air at (747) 966-3037 for a written, upfront estimate. We’ll inspect the ductwork, the panel, and the existing equipment before you spend a dollar.
Key takeaways:
- Selma AC installation ranges from $3,500 to $7,500 depending on ductwork, panel, and SEER2 rating.
- Older Selma tract homes often need duct corrections because original swamp-cooler runs can’t feed a modern air handler.
- We install and service Rheem, York, Daikin, and Bryant equipment, with parts support coordinated through our San Antonio office and dispatched to Selma.
- Every job includes a written price before work starts, shoe covers and drop cloths inside, and a photo of the clean-up before we leave.
Why Meadowsweet Heating & Air Is Selma’s Preferred AC Installation Company
We’re part of the Cedarwell family of HVAC companies, established in 2004, and every job we complete in Selma carries the Cedarwell Care Promise. That means a written price before any work starts, background-checked and uniformed technicians who follow our C.A.R.E. values code, and a 365-Day Done Right Promise: if it isn’t done right, we make it right. No runarounds. No fine print.
Selma homeowners call us because we treat the house like a home, not a job site. Our technicians put shoe covers on at the door and lay drop cloths from the entry to the equipment, including the hallway to the attic access and the path to the electrical panel. Before we leave, we send you a photo of the clean-up on every install. That’s not an upsell. It’s standard. When kids are napping or a pet is anxious, we ask where the quietest route is and when the family’s quiet hours are. The C.A.R.E. values aren’t a poster in our office. They’re how the crew behaves in your hallway.
And you’ll always reach a person when you call. A live human answers 24 hours a day, 7 days a week, including nights, weekends, and holidays. No voicemail queue. No “press 2 for service.” Our owner, Luis Serrano, holds the team to that standard because Selma families shouldn’t have to navigate a phone tree when the AC quits at 5:30 p.m. on a Friday before a 106°F weekend.
Furnace Installation in Selma
Furnace Installation in Selma is a smaller part of our call volume than AC work, but the Valley’s damp, fog-heavy winters make it just as important. A furnace replacement in Selma typically runs $150-$700 for repairs when a system can be saved, while a full furnace installation generally falls inside the $3,500-$7,500 range when paired with a matching AC system or complete HVAC package. From November through February, dense Tule fog keeps outdoor units and gas connections wet for weeks at a time, so we pay particular attention to combustion air, flue integrity, and corrosion on gas valves and electrical connections during every furnace install.
When Selma Homes Need a Furnace Swap
Many Selma homes still run their original mid-century furnace alongside a newer AC coil, and that mismatch shows up as uneven heat, short cycling, or a burner that struggles on cold, foggy nights. If your furnace is older than the AC equipment or you’re converting from an evaporative-cooler home to a full split system for the first time, the furnace and air handler need to be sized and paired together, not bolted on separately.
What We Check Before a Furnace Goes In
We measure static pressure on the existing ductwork, confirm the panel can support the new blower, and verify that the return air path is adequate for heating airflow, not just cooling. In Selma’s older tract homes, the return is often a single small grille in a hallway, which works okay for a swamp cooler but chokes a modern furnace. We correct that before the new equipment starts, not after you’ve spent a winter fighting cold back bedrooms.
HVAC Installation in Selma
HVAC Installation in Selma means more than swapping boxes. It means matching heating and cooling equipment to a house that may have been built for neither. A complete Selma HVAC installation, including condenser, air handler or furnace, thermostat, and the necessary duct or electrical corrections, typically lands between $3,500 and $7,500. The final price depends on SEER2 rating, whether duct runs need to be reworked after our static pressure test, and whether the electrical panel has spare capacity for the new condenser and air handler.
Older Selma Homes Need More Than a Tonnage Match
Selma’s post-WWII residential core was framed around whole-house evaporative coolers, which push high volumes of air through oversized, low-static ducts. Refrigerated central AC needs the opposite: lower airflow at higher static pressure. When a 3-ton unit goes in on swamp-cooler ducting with no correction, the far bedrooms starve for air, the evaporator coil freezes during July and August, and the homeowner blames the brand. We’ve pulled builder-grade splits off Floral Avenue that were only a few years old and already baked because the ducting couldn’t deliver what the air handler asked for.
Panel and Electrical Reality Checks
Before we quote a full HVAC installation in Selma, we look at the electrical panel. Many 1960s and 1970s tract homes have 100-amp service and no spare 240V breaker for a new condenser. Some have panels that are still safe but out of room. Others need a subpanel or a service upgrade. We will not discover that mid-install and surprise you with a change order. It gets priced up front, in writing, before any work starts.
Trusted Brands We Service in Selma
Meadowsweet Heating & Air is qualified to install and service equipment from nine brands, and in Selma we most often recommend Rheem, York, Daikin, and Bryant for their performance in high-heat, high-dust conditions. Each has strong SEER2 options and solid parts availability, which matters when an August failure can’t wait a week for a backordered component. Our San Antonio office coordinates parts dispatch for Selma jobs so we can often have common components on the truck the same day. We stock filters, capacitors, contactors, and thermostats for the brands we install locally. If your Selma home already runs a Rheem, York, Daikin, or Bryant system, our AC Installation team can match the existing equipment rather than pushing you toward a brand you don’t know.
Common AC Installation Problems We See in Selma Homes
- Swamp-cooler ductwork reused on a refrigerant system. The original high-volume, low-static ducts can’t deliver rated airflow to far bedrooms, so the new unit short-cycles, the coil ices, and capacity drops exactly when Selma hits 105°F.
- Sizing by square footage instead of a real load calculation. A 1,600-square-foot Selma tract home with single-pane windows and west-facing unshaded walls may need a different capacity than the same square footage on a shaded lot near Selma High School. We run a Manual J-style load calculation on every install quote.
- Electrical panels discovered mid-install to have no spare 240V breaker. This happens often in Selma’s 1960s and 1970s housing stock, and it should be caught during the estimate, not after the old unit is on the lawn. We check the panel as part of our written quote.
- Vineyard dust packing the condenser coil within weeks of a clean install. If a new unit goes in during late July or early August and sits adjacent to a vineyard edge or drying yard, the coil can load with raisin grit before the first cooling bill arrives. We schedule post-install coil checks around this cycle and recommend a late-July preventive cleaning for established units.
Pricing for AC Installation in Selma, TX
In Selma, a complete AC installation runs $3,500-$7,500. That includes the condenser, air handler or coil, thermostat, refrigerant, pad, and basic electrical connection. What moves the price within that range is the house itself. A newer Selma home with properly sized ducts and a panel with spare breakers sits at the lower end. A 1968 tract house with swamp-cooler ducting, a single undersized return, and a full panel sits at the upper end because the correction work has to happen for the new unit to perform. A tune-up runs $80-$200, and we recommend one before your first heavy cooling season and again before harvest if you live near vineyards.
| Service | Typical Selma Price Range |
|---|---|
| AC Installation | $3,500-$7,500 |
| Tune-Up | $80-$200 |
Every quote is a written price, provided before any work starts. The number we give you is the number you pay. No one gets paid more for selling you something you don’t need, and our technicians are not on commission. Call (747) 966-3037 for a free estimate. We’ll inspect the ductwork, the panel, and the current equipment, then give you a price you can plan around.
We Also Serve Cities Near Selma
While our Selma crews focus on homes across the city, we also run installations in Houston, San Antonio, Dallas, and Fort Worth. If you’re in Selma and want to see our full service area or read more about how we approach AC work across Texas, visit our AC Installation in Selma page. Dispatch and scheduling are coordinated from our San Antonio office, and crews serve Selma and the surrounding area locally.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About AC Installation in Selma
Because the ductwork in many Selma tract homes was sized for a high-volume, low-static swamp cooler, not a modern refrigerant air handler, so the new 3-ton unit can’t move its rated airflow to the far bedrooms. The result is short cycling, frozen coils, and a home that still feels warm at 4 p.m. We correct the ducting or redo the return before or during the install. Call (747) 966-3037 for an airflow check before you replace the box.
Sometimes. Many Selma homes built from the 1950s through the 1980s have 100-amp panels with no spare 240V breaker for a new condenser or air handler. We inspect the panel during the estimate, and if an upgrade or subpanel is needed, that cost is included in your written price, never sprung on you mid-install. Call us for a free panel and load review.
From mid-August through September, vineyard dust and agricultural particulates ride the Valley air and pack into condenser coils, especially on homes near drying yards or vineyard edges. A brand-new unit installed in late July can have a fouled coil within three weeks if it isn’t cleaned. We schedule late-July preventive coil cleanings specifically for this and check new installs again after harvest. Call (747) 966-3037 to get on the pre-harvest list.
Yes, because Selma’s summer cooling season runs four-plus months with daytime highs regularly above 105°F and overnight lows that barely drop below 70°F, which means your compressor runs almost continuously. A higher SEER2 rating saves you more money here than it would in a milder climate because there are simply more hours of runtime to save on. We’ll show you the annual operating cost difference for your specific home before you choose.
A complete AC installation in Selma runs $3,500-$7,500, and a tune-up runs $80-$200. The range depends on ductwork condition, panel capacity, SEER2 rating, and whether your home still has legacy swamp-cooler ducting that needs correction. The estimate is free, and it comes in writing before you decide anything. Call (747) 966-3037.
Call Meadowsweet Heating & Air for AC Installation in Selma
If your Selma home needs a new AC, a full HVAC system, or a furnace paired with a new coil, we’ll start with a real inspection of the ductwork, the panel, and the load. You’ll get a written price before any work starts, a crew that treats your floors and quiet hours with respect, and a 365-Day Done Right Promise behind the whole job. Call (747) 966-3037 for a free estimate, or reach us any time, day or night. A live person answers.
Written by Luis Serrano, Owner at Meadowsweet Heating & Air, serving Selma since the Cedarwell family of HVAC companies was founded in 2004.